TPT29511A-VS1R

3PEAK
TPT29511A Hot-swap I2C-BUS buffer Features Description Bidirectional Translator of I2C Applications and The TPT2511A device is a dual bidirectional I 2C and SMBus Compatible SMBus Hot-swap buffer with an enable (EN) input, and ⚫ Support Fast-mode Plus, up to 1Mbps data rate work from 2.3V to 5.5V VCC, which supports IO cards live ⚫ High-impedance SCL1, SDA1, SCL2 and SDA2 pins ⚫ pr...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус uSOP-8 MSOP8
Количество каналов
Тип входного сигнала
Тип выходного сигнала
Особенности
Напряжение питания входа
Задержка прохождения сигнала (макс)
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
TPT29511A Hot-swap I2C-BUS buffer Features Description Bidirectional Translator of I2C Applications and The TPT2511A device is a dual bidirectional I 2C and SMBus Compatible SMBus Hot-swap buffer with an enable (EN) input, and ⚫ Support Fast-mode Plus, up to 1Mbps data rate work from 2.3V to 5.5V VCC, which supports IO cards live ⚫ High-impedance SCL1, SDA1, SCL2 and SDA2 pins ⚫ prevents the backplane-side I2C lines (in) from the other for EN = LOW 1V pre-charge on All SDA and SCL Lines prevents ⚫ corruption during live board insertion ⚫ Operating Power Supply Range of 2.35V to 5.5V ⚫ Low ICC Chip Disable of <1 μA ⚫ Powered-Off High-Impedance ⚫ ESD Protection: insertion and removal from backplane. Control circuit card-side I2C lines (out) until a stop command or bus idle condition occurs on the backplane without bus contention on the card. When the connection is made, the TPT29511A provides bidirectional buffering, keeping the backplane and card capacitances isolated. I2C Pins The TPT29511A The PCA9511A rise time accelerator circuitry allows the use of weaker DC pull-up currents ◼ 7kV Human-Body Model while still meeting rise time requirements. The ◼ 1.5kV Charged-Device Model TPT29511A incorporates a digital ENABLE input pin, which enables the device when asserted HIGH and forces the device into a low current mode when asserted LOW, and an open-drain READY output pin, which indicates that the backplane and card sides are connected together (HIGH) or not (LOW). TPT29511A is available in MSOP8 and SOP8 package, and is characterized from –40°C to +125°C. Applications ⚫ Servers/Storages ⚫ Enterprise Switching ⚫ Telecom switching equipment and Base stations ⚫ Industrial automation equipment www.3peakic.com.cn 1 / 13 Rev. 0 PDF
Документация на серию TPT29511A 

Дата модификации: 20.11.2022

Размер: 1.01 Мб

13 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    RS0101YH6 (RUNIC)