Вход / Регистрация

AP5056IM8P

Chipown
AP5056 Using SOP8/MSOP8 package 1A Linear Li-Ion Battery Charger Description The AP5056 is a complete constant current & constant voltage linear charger for single cell lithium-ion batteries. Its SOP/MSOP package and low external component count make the AP5056 ideally suited for portable applications. Furthermore, the AP5056 is specifically designed to work within USB power specifications....
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус uSOP-8 MSOP8
Режим функционирования
Тип заряжаемого аккумулятора
Выходное напряжение
Напряжение питания
Максимальный выходной ток
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
AP5056 Using SOP8/MSOP8 package 1A Linear Li-Ion Battery Charger Description The AP5056 is a complete constant current & constant voltage linear charger for single cell lithium-ion batteries. Its SOP/MSOP package and low external component count make the AP5056 ideally suited for portable applications. Furthermore, the AP5056 is specifically designed to work within USB power specifications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The AP5056 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the AP5056 automatically enters a low current state, dropping the battery drain current to less than 2uA. The AP5056 can be put into shutdown mode, reducing the supply current to 50uA. Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination.  No MOSFET, Sense Resistor or Blocking Diode Required  Complete Linear Charger in SOP/MSOP Package for single Cell Lithium-Ion Batteries  Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating  Charges Single Cell Li-Ion Batteries Directly from USB Port  Preset 4.2V Charge Voltage with ±1% Accuracy  Charge Current Monitor Output for Gas Gauging  Automatic Recharge  Charge state pairs of output, no battery and fault status display  C/10 Charge Termination  50uA Supply Current in Shutdown  2.9V Trickle Charge Threshold  Soft-Start Limits Inrush Current  Battery temperature monitoring function  Available in SOP8-PP/ MSOP8-PP Package Package  SOP8-PP/MSOP8-PP Applications  Cellular Telephones, PDAs, MP3 /MP4 Players  Charging Docks and Cradles  Bluetooth 、GPS Applications Features  Programmable Charge Current Up to 1000mA Typical Application Circuit 1 8 2 7 3 6 4 5 PDF
Документация на серию AP5056 

Дата модификации: 19.10.2023

Размер: 713.6 Кб

9 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AP5056 (CHIPOWN)