CBM2576DT-3.3

Corebai
CBM2576-XX OPERATION INSTRUCTION The CBM2576 series of regulators are FEATURES  monolithic integrated circuits ideally suited for 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable step–down Output Versions  easy and convenient switching design regulator of a (buck converter). All circuits of this series are Adjustable Version Output Voltage capable of driving a 3.0 A load with excelle...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус TO2635
Тип преобразователя
Входное напряжение
Выходное напряжение
Максимальный выходной ток
Кол-во выходов
Частота преобразования
Ток собственного потребления
Максимальная скважность преобразования
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i Тип Режим Uвх Uвых Iвых Выходов F преобр Iпотр nmax Опции Примечание T раб Карточка
товара
P= LM2576S-3.3 (YOUTAI)
 
TO2635 в ленте 800 шт
 
 — — — — —

Файлы 2

показать свернуть
CBM2576-XX OPERATION INSTRUCTION The CBM2576 series of regulators are FEATURES  monolithic integrated circuits ideally suited for 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable step–down Output Versions  easy and convenient switching design regulator of a (buck converter). All circuits of this series are Adjustable Version Output Voltage capable of driving a 3.0 A load with excellent Range,1.23 to 37 V ±4% line and load regulation. These devices are  Maximum Over Line and Load Conditions  Guaranteed 3.0 A Output Current V, 12 V, 15 V, and an adjustable output  Wide Input Voltage Range version.  Requires Only 4 External Components  52 kHz Fixed Frequency Internal Oscillator  TTL Shutdown Capability, Low Power available in fixed output voltages of 3.3 V, 5.0 These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the Standby Mode CBM2576 are offered by several different  High Efficiency  Uses Readily Available Standard Inductors  Thermal Shutdown and Current Limit efficiency is significantly higher in comparison Protection with popular three–terminal linear regulators, inductor manufacturers. Since the CBM2576 converter is a switch–mode power supply, its especially with higher input voltages. In many cases, the power dissipated is so low that no heatsink is required or its size could be APPLICATIONS  reduced dramatically. A standard series of inductors optimized Simple High–Efficiency Step–Down (Buck) for use with the CBM2576 are available from Regulator  Efficient Pre–Regulator for several different manufacturers. This feature Linear greatly simplifies the design of switch–mode Regulators power  On–Card Switching Regulators include a guaranteed ±4% tolerance on  Positive to Negative  Power Supply for Battery Chargers CBM2576 features and output load conditions, and ±10% on the (Buck–Boost) Negative Step–Up Converters The output voltage within specified input voltages Converter  supplies. oscillator frequency (±2% over 0℃ to 125℃). External shutdown is included, featuring 80 ㎂ (typical) standby current. The output switch includes cycle–by–cycle current limiting, as well as thermal shutdown for full protection GENERAL DESCRIPTION under fault conditions. 1 www.corebai.com PDF
Документация на CBM2576DT-5.0 

Subject:

Дата модификации: 12.09.2023

Размер: 692.1 Кб

16 стр.

CBM2576-XX OPERATION INSTRUCTION Features  3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions  Adjustable Version Output Voltage Range,1.23 to 37 V ±4%  Maximum Over Line and Load Conditions  Guaranteed 3.0 A Output Current  Wide Input Voltage Range  Requires Only 4 External Components  52 kHz Fixed Frequency Internal Oscillator  TTL Shutdown Capability, Low Power Standby Mode  High Efficiency  Uses Readily Available Standard Inductors  Thermal Shutdown and Current Limit Protection Applications  Simple High–Efficiency Step–Down (Buck) Regulator  Efficient Pre–Regulator for Linear Regulators  On–Card Switching Regulators  Positive to Negative Converter (Buck–Boost)  Negative Step–Up Converters  Power Supply for Battery Chargers General Description The CBM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step–down switching regulator (buck converter). All circuits of this series are capable of driving a 3.0 A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version. These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the CBM2576 are offered by several different inductor manufacturers. Since the CBM2576 converter is a switch–mode power supply, its efficiency is significantly higher in comparison with popular three–terminal linear regulators, especially with higher input voltages. In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the CBM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch–mode power supplies. The CBM2576 features include a guaranteed ±4% tolerance on output voltage within FOCUS ON DEVELOPMENT • SINCERELY SERVICE • INNOVATIVE FUTURE www.c oreba i. com PDF
Документация на CBM2576DT-3.3 

Subject:

Дата модификации: 14.06.2022

Размер: 2.1 Мб

20 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AP2007SPER (CHIPOWN)