Вход / Регистрация

CH423PNSR

Cosemi
CH423P Preliminary Nov 2021 CH423P Hall-Effect Latching Sensor with On-Chip Pull-Up Resistor Features • • • • • • • • • • Bipolar technology Reverse battery protection 4.2V to 30V operation voltage Wide temperature operation -40 oC to 150 oC Small Size SOT-23, or TO-92S Internal pull-up resistor Output-reverse protection Solid-state reliability Resistant to physical stress Activate with small...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOT233L
Тип датчика Датчик Холла с защелкой, цифровой
Рабочая температура
Монтаж
Применение Фиксация приближения магнита (датчик вскрытия порогового магнитного поля)
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
CH423P Preliminary Nov 2021 CH423P Hall-Effect Latching Sensor with On-Chip Pull-Up Resistor Features • • • • • • • • • • Bipolar technology Reverse battery protection 4.2V to 30V operation voltage Wide temperature operation -40 oC to 150 oC Small Size SOT-23, or TO-92S Internal pull-up resistor Output-reverse protection Solid-state reliability Resistant to physical stress Activate with small, commercially available permanent magnets Functional Block Diagram Package ⚫ TO-92S SOT23-3L (preliminary) (preliminary) Application • • • • • Brushless DC motor commutation Flow meter Solid-state switch Speed measurement Revolution counting Description The CH423P family is a Hall-effect latch designed in bipolar technology. The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator for operation with supply voltages of 4.2 to 30V, Gnd and Output reverse protection diode, temperature compensation circuitry, small-signal amplifier, Schmitt trigger and an output driver with a pull-up resistor; all in a single package. It is designed to respond to alternating North and South poles. While the magnetic flux density(B) is larger than operate point (Bop), the output will be turned on (Low), the output is held until the magnetic flux density(B) is lower than release point (Brp), then be turned off (High). Thanks to its wide operating voltage range 4.2 to 30V and extended temperature range from -40 ℃to +150℃, it is quite suitable for use in automotive, industrial and consumer applications. The device is delivered in variety of packages to customers: SOT-23, and TO-92S flat for through-hole mount. Both 3-lead packages are RoHS compliant. Page 1/11 PDF
Документация на CH423PSR 

L99DZ100 Target Specification

Дата модификации: 11.11.2021

Размер: 820.5 Кб

11 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS451 (RUIMENG)