ER14250+SPC1520

EVE Energy
DE-Passivation This document serves to guide our clients how to activate the passivated batteries. In general, EVE recommend that battery should be stored in a cool, clean, dry environment, the recommended temperature is ≤+30℃, relative humidity ≤+50% to slow the passivation process and maintain a low self-discharge rate. Any high temperature would expedite the passivation process as well as in...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Типоразмер
Тип батареи
Напряжение номинальное
Ёмкость номинальная
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
DE-Passivation This document serves to guide our clients how to activate the passivated batteries. In general, EVE recommend that battery should be stored in a cool, clean, dry environment, the recommended temperature is ≤+30℃, relative humidity ≤+50% to slow the passivation process and maintain a low self-discharge rate. Any high temperature would expedite the passivation process as well as increase the self-discharge rate. After 6 months storage, EVE recommend to active the battery. EVE suggest pre – discharge the batteries with a relatively low continuous loading current approximately to consume its capacity as little as possible，below is the discharge current, discharge time and loading resistance applied for each cell in specific: Battery model Loading current Discharge time Nominal loading voltage ER14250 20mA 15min 1kΩ2s≥3.3V ER14335 25mA 15min 330Ω2s≥3.1V ER14505 30mA 15min 165Ω2s≥3.1V ER17505 30mA 20min 165Ω2s≥3.2V ER18505 35mA 20min 165Ω2s≥3.2V ER26500 60mA 25min 96Ω2s≥3.2V ER34615 75mA 40min 56Ω2s≥3.0V Remark: After the battery cell is activated, stand at room temperature for 12h and test the load voltage. — 1 — PDF
Документация на ER14250/S 

Дата модификации: 08.05.2024

Размер: 127.5 Кб

1 стр.

DE-Passivation This document serves to guide our clients how to activate the passivated batteries. In general, EVE recommend that battery should be stored in a cool, clean, dry environment, the recommended temperature is ≤+30℃, relative humidity ≤+50% to slow the passivation process and maintain a low self-discharge rate. Any high temperature would expedite the passivation process as well as increase the self-discharge rate. After 6 months storage, EVE recommend to active the battery. EVE suggest pre – discharge the batteries with a relatively low continuous loading current approximately to consume its capacity as little as possible，below is the discharge current, discharge time and loading resistance applied for each cell in specific: Battery model Loading current Discharge time Nominal loading voltage ER14250 20mA 15min 1kΩ2s≥3.3V ER14335 25mA 15min 330Ω2s≥3.1V ER14505 30mA 15min 165Ω2s≥3.1V ER17505 30mA 20min 165Ω2s≥3.2V ER18505 35mA 20min 165Ω2s≥3.2V ER26500 60mA 25min 96Ω2s≥3.2V ER34615 75mA 40min 56Ω2s≥3.0V Remark: After the battery cell is activated, stand at room temperature for 12h and test the load voltage. — 1 — PDF
Документация на ER14250V/S 

Дата модификации: 08.05.2024

Размер: 127.5 Кб

1 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    ER14250/S (EVE)