JCK0G472M125135

JB Capacitors Company
Конденсатор алюминиевый 4 В x 4700 мкФ ±20%, SMD, -40...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии JCK

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
SMD Aluminum Electrolytic Capacitor – JCK FEATURES Ø Ø Ø Ø Chip type, operating with wide temperature range -40~+105℃. Load Life of 1,000~2,000 hours Designed for surface mounting on high density circuit board. Emboss carrier tape packing system is available for automatic insertion. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃ ~ +105℃ 4V ~ 100V.DC 0.1 ~ 10000μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater. (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater. (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Stability At Low Temp. Measurement Frequency: 120Hz Rated Voltage (V) Φ4~Φ10 Tan δ (Max.) Φ12.5~Φ16 Impedance Ratio ZT/Z20 (Max.) Load Life 4 0.35 0.42 6.3 0.3 0.38 Rated Voltage (V) Z(-25℃)/ Z(-40℃)/ Z(-25℃)/ Φ12.5~Φ16 Z(-40℃)/ Φ4~Φ10 10 0.24 0.34 Z(20℃) Z(20℃) Z(20℃) Z(20℃) 16 0.2 0.3 4 7 15 7 17 25 0.16 0.26 6.3 4 8 5 12 10 3 6 4 10 35 0.14 0.22 16 2 4 3 8 50 0.14 0.18 25 2 4 2 5 63 0.12 0.14 35 2 3 2 4 100 0.12 0.12 50~63 2 3 2 3 100 3 4 2 3 After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃, They meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current within ± 20% of initial value for capacitors of 10V or more (within ± 30% of initial value for capacitors of 4V & 6.3V) 200% or less of initial specified value Initial specified value or less Self Life After leaving capacitors under no load at 105℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current Within ± 10% of initial value Initial specified value or less Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] ΦDxL A B C E±0.2 L 4x5.4 1.8 4.3 4.3 1.0 5.4 5x5.4 2.1 5.3 5.3 1.3 5.4 *2 Applicable toΦ8x10.5~Φ10 6.3x5.4 2.4 6.6 6.6 2.2 5.4 6.3x7.7 2.4 6.6 6.6 2.2 7.7 8x6.2 3.3 8.3 8.3 2.2 6.2 8x10.5 2.9 8.3 8.3 3.1 10.5 *3 Applicable toΦ12.5~Φ16 10x10.5 3.2 10.3 10.3 4.4 10.5 10x13.5 3.2 10.3 10.3 4.4 13.5 12.5x13.5 4.7 13.0 13.0 4.4 13.5 (mm) 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5 5.5 17.0 17.0 6.7 16.5 16x21.5 5.5 17.0 17.0 6.7 21.5 FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency 50Hz 120Hz 0.1~68µF 0.70 1.00 Φ4~Φ10 100~3300µF 0.85 1.00 Coefficient ~68µF 0.75 1.00 Φ12.5~Φ16 100~680µF 0.8 1.00 1000~10000µF 0.85 1.00 Please visit our website to get more update data, those data & specification are subject 300Hz 1KHz 1.17 1.36 1.08 1.20 1.35 1.57 1.23 1.34 1.10 1.13 to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: info@jbcapacitors.com Tel : (852)2790 5091 10KHz~ 1.50 1.30 2.00 1.50 1.15 Fax: (852)8169 8283 PDF
Документация на серию JCK 

JCK Aluminum Electrolytic Capacitor JCK-1000H-at-105-SMD-Aluminum-Electrolytic-Capacitor

Дата модификации: 05.06.2019

Размер: 401.5 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)