JCK0J470M040054

JB Capacitors Company
Конденсатор алюминиевый 6.3 В x 47 мкФ ±20%, SMD, -40...105 °C, 1000 ч
развернуть ▼ свернуть ▲
Внешний вид серии JCK

Технические характеристики

показать свернуть
Номинальная ёмкость
Допуск ёмкости
Номинальное напряжение
Диаметр корпуса
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа
  Примечания: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1717
Диаметр x Высота 4.3 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Диаметр Высота Траб Наработка Монтаж Примечания Выводы Карточка
товара
F~ EEEHA0J470WR (PAN)
 
— 2000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1717 —
F~ EEE-0JA470WR (PAN)
 
—
 
 — — — — — — — — — —
A+ EEEFK0J470UR (PAN)
 
— в ленте 2000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1717 —
A+ EEEFN1A470UR (PAN)
 
— в ленте 2000 шт V-FN, 10V, 47uF, 105°C, 2000h, 4x5.8mm, ripple 90mArms, 1.35Ohm —
A+ EEEFP0J470AR (PAN)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ EEEFPJ470UAR (PAN)
 
— в ленте 2000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1717 —
A+ EEE0JA470SR (PAN)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ EEE0JA470WR (PAN)
 
— в ленте 2000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1717 —
A+ 10SVP47M (PAN)
 
— в ленте 1000 шт —
A+ ECASD40J476M025K00 (MUR)
 
— 1 шт
 
 — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2917 —
A+ JCS0J470M040054 (JB)
 
— 2000 шт — —
A+ JCS0J470M050054 (JB)
 
— 1000 шт — —
A+ JCS1A470M063054 (JB)
 
— 1000 шт — —
A+ JCS1A470M050054 (JB)
 
— 1000 шт — —
A+ JCK0J470M050054 (JB)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ JCK1A470M050054 (JB)
 
— 1000 шт — —
A+ JCK1A470M063054 (JB)
 
— 1000 шт — —
A+ EEEFK0J470AR (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ EEEFK0J470R (PAN)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ 6SVP47M (PAN)
 
— в ленте 1500 шт —
A+ EEEHBJ470UAR (PAN)
 
— 2000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1717 —
A+ 6SVPA47MAA (PAN)
 
— 1500 шт —
A+ EEEHA0J470AR (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ EEEHA0J470R (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —
A+ EEEHC0J470R (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121 —

Сопутствующие товары 25

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-B010K476T (XIANGYEE)
 
TANT35281935X28X19MM 1 шт
 
 TANT35281935X28X19MM —
CA45-B6R3K476T (XIANGYEE)
 
TANT35281935X28X19MM в ленте 30000 шт
 
 TANT35281935X28X19MM —
CA45-C010K476T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 1000 шт
 
 TANT60322860X32X28MM —
CA45L-B010K476TE500 (XIANGYEE)
 
TANT35282135X28X21MM в ленте 2000 шт
 
 TANT35282135X28X21MM —
CA45L-C010K476TE400 (XIANGYEE)
 
TANT60322860X32X28MM в ленте 1000 шт
 
 TANT60322860X32X28MM —
CA45-A6R3K476T (XIANGYEE)
 
TANT32161632X16X16MM в ленте 2000 шт TANT32161632X16X16MM —
6TPC47MB (PAN)
 
— в ленте 3000 шт — —
10TPG47M (PAN)
 
— в ленте 2500 шт — —
10TPE47MAZB (PAN)
 
— в ленте 2000 шт — —
10TPB47M (PAN)
 
— в ленте 2000 шт — —
TMCUB0J476MTRF (HIT-AIC)
 
— Конденсатор танталовый 6.3 В 47 мкФ ±20% типоразмер SMD_3528 —  
B 10V-47uF 10% CA45-B010K476T (XIANGYEE)
 
— 1 шт
 
 — —
TC212A476M010Y (SUNLORD)
 
—
 
 — —
TC212A476M006Y (SUNLORD)
 
—
 
 — —
TC212A476M006A (SUNLORD)
 
—
 
 — —
TC212A476K010Y (SUNLORD)
 
—
 
 — —
TC212A476K006Y (SUNLORD)
 
—
 
 — —
TC212A476K006A (SUNLORD)
 
—
 
 — —
CA55-B010M476T (XIANGYEE)
 
— — —
CA45-B010M476T (XIANGYEE)
 
TANT35281935X28X19MM
 
 TANT35281935X28X19MM —
CA45-A010K476T (XIANGYEE)
 
TANT32161632X16X16MM 100 шт
 
 TANT32161632X16X16MM —
B 6.3V-47uF 10% L-KLS10-TCA-476K6.3V-B (KLS)
 
—
 
 — —
B 10V-47uF 10% LowESR CA45L-B010K476TE500 (XIANGYEE)
 
— 1 шт
 
 — —
A 6.3V-47uF 10% LowESR L-KLS10-TCAL-476K6.3V-A (KLS)
 
—
 
 — —
A 6.3V-47uF 10% L-KLS10-TCA-476K6.3V-A (KLS)
 
— 1 шт
 
 — —

Файлы 2

показать свернуть
SMD Aluminum Electrolytic Capacitor – JCK FEATURES     Chip type, operating with wide temperature range -40~+105℃. Load Life of 1,000~2,000 hours Designed for surface mounting on high density circuit board. Emboss carrier tape packing system is available for automatic insertion. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃ ~ +105℃ 4V ~ 100V.DC 0.1 ~ 10000μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater. (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater. (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) Φ4~Φ10 Tan δ (Max.) Φ12.5~Φ16 Stability At Low Temp. 4 0.35 0.42 6.3 0.3 0.38 10 0.24 0.34 Measurement Frequency: 120Hz Impedance Ratio ZT/Z20 (Max.) Load Life Rated Voltage (V) Z(-25℃)/ Z(-40℃)/ Z(-25℃)/ Φ12.5~Φ16 Z(-40℃)/ Φ4~Φ10 Z(20℃) Z(20℃) Z(20℃) Z(20℃) 16 0.2 0.3 4 7 15 7 17 25 0.16 0.26 6.3 4 8 5 12 10 3 6 4 10 35 0.14 0.22 16 2 4 3 8 50 0.14 0.18 25 2 4 2 5 63 0.12 0.14 35 2 3 2 4 100 0.12 0.12 50~63 2 3 2 3 100 3 4 2 3 After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃, They meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current within ± 20% of initial value for capacitors of 10V or more (within ± 30% of initial value for capacitors of 4V & 6.3V) 200% or less of initial specified value Initial specified value or less Self Life After leaving capacitors under no load at 105℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current Within ± 10% of initial value Initial specified value or less Initial specified value or less DRAWING (Unit: mm) *4 ― *4 ― *1 Voltage mark for 6.3V is [6V] or [6.3V] ΦDxL A B C E±0.2 L 4x5.4 1.8 4.3 4.3 1.0 5.4 5x5.4 2.1 5.3 5.3 1.3 5.4 6.3x5.4 2.4 6.6 6.6 2.2 5.4 *2 Applicable toΦ8x10.5~Φ10 6.3x7.7 2.4 6.6 6.6 2.2 7.7 8x6.2 3.3 8.3 8.3 2.2 6.2 8x10.5 2.9 8.3 8.3 3.1 10.5 *3 Applicable toΦ12.5~Φ16 10x10.5 3.2 10.3 10.3 4.4 10.5 10x13.5 3.2 10.3 10.3 4.4 13.5 *4 Surface Marking Types: jbK, jK, CK, XT 12.5x13.5 4.7 13.0 13.0 4.4 13.5 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5 5.5 17.0 17.0 6.7 16.5 (mm) 16x21.5 5.5 17.0 17.0 6.7 21.5 FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency 50Hz 120Hz 0.1~68µF 0.70 1.00 Φ4~Φ10 100~3300µF 0.85 1.00 Coefficient ~68µF 0.75 1.00 Φ12.5~Φ16 100~680µF 0.8 1.00 1000~10000µF 0.85 1.00 Please visit our website to get more update data, those data & specification are subject 300Hz 1KHz 1.17 1.36 1.08 1.20 1.35 1.57 1.23 1.34 1.10 1.13 to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: info@jbcapacitors.com Tel : (852)2790 5091 10KHz~ 1.50 1.30 2.00 1.50 1.15 Fax: (852)8169 8283 PDF
Документация на JCK2A100M080105 

JCK 1000H to 2000H at 105 Aluminum Electrolytic Capacitor JCK-1000H-to-2000H-at-105-SMD-Aluminum-Electrolytic-Capacitor

Дата модификации: 16.04.2020

Размер: 363 Кб

2 стр.

SMD Aluminum Electrolytic Capacitor – JCK FEATURES Ø Ø Ø Ø Chip type, operating with wide temperature range -40~+105℃. Load Life of 1,000~2,000 hours Designed for surface mounting on high density circuit board. Emboss carrier tape packing system is available for automatic insertion. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃ ~ +105℃ 4V ~ 100V.DC 0.1 ~ 10000μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater. (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater. (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Stability At Low Temp. Measurement Frequency: 120Hz Rated Voltage (V) Φ4~Φ10 Tan δ (Max.) Φ12.5~Φ16 Impedance Ratio ZT/Z20 (Max.) Load Life 4 0.35 0.42 6.3 0.3 0.38 Rated Voltage (V) Z(-25℃)/ Z(-40℃)/ Z(-25℃)/ Φ12.5~Φ16 Z(-40℃)/ Φ4~Φ10 10 0.24 0.34 Z(20℃) Z(20℃) Z(20℃) Z(20℃) 16 0.2 0.3 4 7 15 7 17 25 0.16 0.26 6.3 4 8 5 12 10 3 6 4 10 35 0.14 0.22 16 2 4 3 8 50 0.14 0.18 25 2 4 2 5 63 0.12 0.14 35 2 3 2 4 100 0.12 0.12 50~63 2 3 2 3 100 3 4 2 3 After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃, They meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current within ± 20% of initial value for capacitors of 10V or more (within ± 30% of initial value for capacitors of 4V & 6.3V) 200% or less of initial specified value Initial specified value or less Self Life After leaving capacitors under no load at 105℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current Within ± 10% of initial value Initial specified value or less Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] ΦDxL A B C E±0.2 L 4x5.4 1.8 4.3 4.3 1.0 5.4 5x5.4 2.1 5.3 5.3 1.3 5.4 *2 Applicable toΦ8x10.5~Φ10 6.3x5.4 2.4 6.6 6.6 2.2 5.4 6.3x7.7 2.4 6.6 6.6 2.2 7.7 8x6.2 3.3 8.3 8.3 2.2 6.2 8x10.5 2.9 8.3 8.3 3.1 10.5 *3 Applicable toΦ12.5~Φ16 10x10.5 3.2 10.3 10.3 4.4 10.5 10x13.5 3.2 10.3 10.3 4.4 13.5 12.5x13.5 4.7 13.0 13.0 4.4 13.5 (mm) 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5 5.5 17.0 17.0 6.7 16.5 16x21.5 5.5 17.0 17.0 6.7 21.5 FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency 50Hz 120Hz 0.1~68µF 0.70 1.00 Φ4~Φ10 100~3300µF 0.85 1.00 Coefficient ~68µF 0.75 1.00 Φ12.5~Φ16 100~680µF 0.8 1.00 1000~10000µF 0.85 1.00 Please visit our website to get more update data, those data & specification are subject 300Hz 1KHz 1.17 1.36 1.08 1.20 1.35 1.57 1.23 1.34 1.10 1.13 to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: info@jbcapacitors.com Tel : (852)2790 5091 10KHz~ 1.50 1.30 2.00 1.50 1.15 Fax: (852)8169 8283 PDF
Документация на серию JCK 

JCK Aluminum Electrolytic Capacitor JCK-1000H-at-105-SMD-Aluminum-Electrolytic-Capacitor

Дата модификации: 05.06.2019

Размер: 401.5 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)