JCK1A221M063077

JB Capacitors Company
Конденсатор алюминиевый 10 В x 220 мкФ ±20%, SMD, -40...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии JCK

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 6.6 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 22

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEEFPC221XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ JCK1C221M063077 (JB)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ CE016M0220REG-1010 (YAG)
 
— в ленте 500 шт конденсатор алюминиевый SMD 220 мкФ 16 В -40...105 °C 2000 ч — — —
A+ CK010M221E7DPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CK010M221F6BPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — — —
A+ CK016M221E7DPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CK016M221F10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ CK016M221F6BPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — — —
A+ EEEFK1C221P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFK1C221XP (PAN)
 
— в ленте 900 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ EEEFP1A221AP (PAN)
 
— 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEETP1C221AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFT1C221AP (PAN)
 
— в ленте 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ EEEFPA221XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ EEE1CA221P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ 10SVPE220M (PAN)
 
— в ленте 1000 шт — — — — Super low ESR / large capacitance
A+ EEEFK1A221P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFK1A221XP (PAN)
 
— 900 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ EEEFK1C221AP (PAN)
 
— 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ CS010M221E7DPKKKV00R (SUSCON)
 
— — — — — — —
A+ EEETC1A221P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEETP1A221AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333

Сопутствующие товары 19

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-D010K227T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-D016K227T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-E016K227T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45L-D010K227TE200 (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45L-E016K227TE200 (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA55-D010M227TE100 (XIANGYEE)
 
— в ленте 500 шт — —
L-KLS10-TCA-227K10V-D (KLS)
 
— в ленте 500 шт — —
CA45-C010K227T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 500 шт
 
 TANT60322860X32X28MM —
10TPB220M (PAN)
 
— в ленте 2000 шт — —
10TPB220ML (PAN)
 
— в ленте 2500 шт — —
16TQC220MD3 (PAN)
 
— в ленте 2500 шт
 
 — —
CA45-C010M227T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 500 шт
 
 TANT60322860X32X28MM —
CA45-D010M227T (XIANGYEE)
 
TANT73433173X43X31MM 103 шт
 
 TANT73433173X43X31MM —
CA45-D016M227T (XIANGYEE)
 
TANT73433173X43X31MM
 
 TANT73433173X43X31MM —
CA45-E010K227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E010M227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E016M227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E020K227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E020M227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —

Файлы 2

показать свернуть
SMD Aluminum Electrolytic Capacitor – JCK FEATURES     Chip type, operating with wide temperature range -40~+105℃. Load Life of 1,000~2,000 hours Designed for surface mounting on high density circuit board. Emboss carrier tape packing system is available for automatic insertion. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃ ~ +105℃ 4V ~ 100V.DC 0.1 ~ 10000μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater. (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater. (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) Φ4~Φ10 Tan δ (Max.) Φ12.5~Φ16 Stability At Low Temp. 4 0.35 0.42 6.3 0.3 0.38 10 0.24 0.34 Measurement Frequency: 120Hz Impedance Ratio ZT/Z20 (Max.) Load Life Rated Voltage (V) Z(-25℃)/ Z(-40℃)/ Z(-25℃)/ Φ12.5~Φ16 Z(-40℃)/ Φ4~Φ10 Z(20℃) Z(20℃) Z(20℃) Z(20℃) 16 0.2 0.3 4 7 15 7 17 25 0.16 0.26 6.3 4 8 5 12 10 3 6 4 10 35 0.14 0.22 16 2 4 3 8 50 0.14 0.18 25 2 4 2 5 63 0.12 0.14 35 2 3 2 4 100 0.12 0.12 50~63 2 3 2 3 100 3 4 2 3 After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃, They meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current within ± 20% of initial value for capacitors of 10V or more (within ± 30% of initial value for capacitors of 4V & 6.3V) 200% or less of initial specified value Initial specified value or less Self Life After leaving capacitors under no load at 105℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current Within ± 10% of initial value Initial specified value or less Initial specified value or less DRAWING (Unit: mm) *4 ― *4 ― *1 Voltage mark for 6.3V is [6V] or [6.3V] ΦDxL A B C E±0.2 L 4x5.4 1.8 4.3 4.3 1.0 5.4 5x5.4 2.1 5.3 5.3 1.3 5.4 6.3x5.4 2.4 6.6 6.6 2.2 5.4 *2 Applicable toΦ8x10.5~Φ10 6.3x7.7 2.4 6.6 6.6 2.2 7.7 8x6.2 3.3 8.3 8.3 2.2 6.2 8x10.5 2.9 8.3 8.3 3.1 10.5 *3 Applicable toΦ12.5~Φ16 10x10.5 3.2 10.3 10.3 4.4 10.5 10x13.5 3.2 10.3 10.3 4.4 13.5 *4 Surface Marking Types: jbK, jK, CK, XT 12.5x13.5 4.7 13.0 13.0 4.4 13.5 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5 5.5 17.0 17.0 6.7 16.5 (mm) 16x21.5 5.5 17.0 17.0 6.7 21.5 FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency 50Hz 120Hz 0.1~68µF 0.70 1.00 Φ4~Φ10 100~3300µF 0.85 1.00 Coefficient ~68µF 0.75 1.00 Φ12.5~Φ16 100~680µF 0.8 1.00 1000~10000µF 0.85 1.00 Please visit our website to get more update data, those data & specification are subject 300Hz 1KHz 1.17 1.36 1.08 1.20 1.35 1.57 1.23 1.34 1.10 1.13 to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: info@jbcapacitors.com Tel : (852)2790 5091 10KHz~ 1.50 1.30 2.00 1.50 1.15 Fax: (852)8169 8283 PDF
Документация на JCK2A100M080105 

JCK 1000H to 2000H at 105 Aluminum Electrolytic Capacitor JCK-1000H-to-2000H-at-105-SMD-Aluminum-Electrolytic-Capacitor

Дата модификации: 16.04.2020

Размер: 363 Кб

2 стр.

SMD Aluminum Electrolytic Capacitor – JCK FEATURES Ø Ø Ø Ø Chip type, operating with wide temperature range -40~+105℃. Load Life of 1,000~2,000 hours Designed for surface mounting on high density circuit board. Emboss carrier tape packing system is available for automatic insertion. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃ ~ +105℃ 4V ~ 100V.DC 0.1 ~ 10000μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater. (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater. (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Stability At Low Temp. Measurement Frequency: 120Hz Rated Voltage (V) Φ4~Φ10 Tan δ (Max.) Φ12.5~Φ16 Impedance Ratio ZT/Z20 (Max.) Load Life 4 0.35 0.42 6.3 0.3 0.38 Rated Voltage (V) Z(-25℃)/ Z(-40℃)/ Z(-25℃)/ Φ12.5~Φ16 Z(-40℃)/ Φ4~Φ10 10 0.24 0.34 Z(20℃) Z(20℃) Z(20℃) Z(20℃) 16 0.2 0.3 4 7 15 7 17 25 0.16 0.26 6.3 4 8 5 12 10 3 6 4 10 35 0.14 0.22 16 2 4 3 8 50 0.14 0.18 25 2 4 2 5 63 0.12 0.14 35 2 3 2 4 100 0.12 0.12 50~63 2 3 2 3 100 3 4 2 3 After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃, They meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current within ± 20% of initial value for capacitors of 10V or more (within ± 30% of initial value for capacitors of 4V & 6.3V) 200% or less of initial specified value Initial specified value or less Self Life After leaving capacitors under no load at 105℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Dissipation Factor Leakage Current Within ± 10% of initial value Initial specified value or less Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] ΦDxL A B C E±0.2 L 4x5.4 1.8 4.3 4.3 1.0 5.4 5x5.4 2.1 5.3 5.3 1.3 5.4 *2 Applicable toΦ8x10.5~Φ10 6.3x5.4 2.4 6.6 6.6 2.2 5.4 6.3x7.7 2.4 6.6 6.6 2.2 7.7 8x6.2 3.3 8.3 8.3 2.2 6.2 8x10.5 2.9 8.3 8.3 3.1 10.5 *3 Applicable toΦ12.5~Φ16 10x10.5 3.2 10.3 10.3 4.4 10.5 10x13.5 3.2 10.3 10.3 4.4 13.5 12.5x13.5 4.7 13.0 13.0 4.4 13.5 (mm) 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5 5.5 17.0 17.0 6.7 16.5 16x21.5 5.5 17.0 17.0 6.7 21.5 FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency 50Hz 120Hz 0.1~68µF 0.70 1.00 Φ4~Φ10 100~3300µF 0.85 1.00 Coefficient ~68µF 0.75 1.00 Φ12.5~Φ16 100~680µF 0.8 1.00 1000~10000µF 0.85 1.00 Please visit our website to get more update data, those data & specification are subject 300Hz 1KHz 1.17 1.36 1.08 1.20 1.35 1.57 1.23 1.34 1.10 1.13 to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: info@jbcapacitors.com Tel : (852)2790 5091 10KHz~ 1.50 1.30 2.00 1.50 1.15 Fax: (852)8169 8283 PDF
Документация на серию JCK 

JCK Aluminum Electrolytic Capacitor JCK-1000H-at-105-SMD-Aluminum-Electrolytic-Capacitor

Дата модификации: 05.06.2019

Размер: 401.5 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)