CD4052HBEN

JSCJ
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. Dual 4-channel Analog Multiplexer/Demultiplexer CD4052H Logic 1 Introduction 3 Features analogue • Wide supply voltage range from 3V to 18V multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four • Fully static operation • 5V, 10V and 18V parametric ratings independent inputs/outputs (nY0...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
корпус —
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. Dual 4-channel Analog Multiplexer/Demultiplexer CD4052H Logic 1 Introduction 3 Features analogue • Wide supply voltage range from 3V to 18V multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four • Fully static operation • 5V, 10V and 18V parametric ratings independent inputs/outputs (nY0 to nY3) and a common • Standardized symmetrical output characteristics input/output (nZ). The common channel select logic includes two select inputs (S1 and S2) and an active • Specified from -40°C to +125°C The CD4052H is a dual 4-channel LOW enable input(/E). Both multiplexers/demultiplexers contain four bidirectional analog switches, each with 4 Applications one side connected to an independent input/output (nY0 to nY3) and the other side connected to a common • Analog and digital multiplexing and demultiplexing • Analog to digital and digital to analog conversion input/output (nZ). With /E LOW, one of the four switches • Signal gating is selected (low-impedance ON-state) by S1 and S2. With /E HIGH, all switches are in the high-impedance • Factory automation • Televisions OFF-state, independent of S1 and S2. If break before make is needed, then it is necessary to use the enable • Appliances • Consumer audio input. • Programmable logic circuits VDD and VSS are the supply voltage connections for the • Sensors digital control inputs (S1 and S2, and /E). The VDD to VSS range is 3V to 18V. The analog inputs/outputs (nY0 to nY3, and nZ) can swing between VDD as a positive limit E and VEE as a negative limit. VDD-VEE may not exceed 18V. Unused inputs must be connected to VDD, VSS, or S2 Ch 1Y0 S1 S2 S1 0 0 another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS 1Z (typically ground). VEE and VSS are the supply voltage 2Z 0 1 Ch 2Y0 Ch 1Y1 Ch 2Y1 1 0 Ch 1Y2 1 1 Ch 2Y2 connections for the switches. Ch 1Y3 2 Available Packages PART NUMBER Ch 2Y3 CD4052H PACKAGE Functional Diagrams SOP16 CD4052H TSSOP16 Note: For all available packages, please refer to the part Orderable Information. www.jscj-elec.com 1 Rev. – 1.0 PDF
Документация на серию CD4052 

CD4052H The data sheet of IC

Дата модификации: 26.05.2025

Размер: 443.2 Кб

17 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS2244 (RUIMENG)