CJ74AVCH4T245BEN

JSCJ
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 4-bit Dual Supply Translating Transceiver; 3-state CJ74AVCH4T245 Logic 1 Introduction 3 Features The CJ74AVCH4T245 is a 4-bit, dual supply transceiver that enables bidirectional level translation. The device • can be used as two 2-bit transceivers or as a 4-bit transceiver. It features two 2-bit input-output ports (nAn Wide supply volt...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус TSSOP-16
Количество линий
Количество каналов
Количество линий в канале
  Особенности: 4-Bit Dual-Supply Bus Transceiver With Configurable Level-Shifting, Voltage Translation, and 3-State Outputs
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 4-bit Dual Supply Translating Transceiver; 3-state CJ74AVCH4T245 Logic 1 Introduction 3 Features The CJ74AVCH4T245 is a 4-bit, dual supply transceiver that enables bidirectional level translation. The device • can be used as two 2-bit transceivers or as a 4-bit transceiver. It features two 2-bit input-output ports (nAn Wide supply voltage range: - VCC(A): 0.8V to 3.6V - VCC(B): 0.8V to 3.6V • Suspend mode and nBn), a direction control input (nDIR), a output • Bus hold on data inputs enable input (/nOE) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any • Inputs accept voltages up to 3.6V • Specified from -40°C to +125°C voltage between 0.8V and 3.6V making the device suitable for translating between any of the low voltage 4 Applications nodes (0.8V, 1.2V, 1.5V, 1.8V, 2.5V and 3.3V). Pins nAn, /nOE and nDIR are referenced to VCC(A) and pins • Personal electronics nBn are referenced to VCC(B). A HIGH on nDIR allows • Industrial transmission from nAn to nBn and a LOW on nDIR allows transmission from nBn to nAn. The output enable • Enterprise • Telecom input (/nOE) can be used to disable the outputs so the buses are effectively isolated. The CJ74AVCH4T245 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors. DIR 2 Available Packages PART NUMBER OE PACKAGE A1 SOP16 CJ74AVCH4T245 TSSOP16 B1 QFN3.5x2.5-16L A2 MIS16 B2 Note: For all available packages, please refer to the part Orderable Information. Logic diagram www.jscj-elec.com 1 Rev. – 1.0 PDF
Документация на CJ74AVCH4T245BEN 

Дата модификации: 14.11.2025

Размер: 408.2 Кб

24 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS4553M (RUIMENG)