CJDR9110T

JSCJ
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 12V Input Single Channel Full Bridge Motor Driver CJDR9110T 1 Motor Driver Introduction CJDR9110T is a 12V DC motor driver. The device is internally integrated with a full bridge composed of four MOS, which can support a power supply voltage range of 3.8V to 12V, and can provide a continuous output current of up to 1.5A or a peak output cur...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус ESOP8
Напряжение питания
Максимальный выходной ток
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 12V Input Single Channel Full Bridge Motor Driver CJDR9110T 1 Motor Driver Introduction CJDR9110T is a 12V DC motor driver. The device is internally integrated with a full bridge composed of four MOS, which can support a power supply voltage range of 3.8V to 12V, and can provide a continuous output current of up to 1.5A or a peak output current of 2.5A. CJDR9110T has an input interface IN / IN compatible with industry standard devices, which can support pulse width modulation (PWM) mode control. When the input interfaces are all low level, the device will enter sleep mode, and the power consumption current in sleep mode is less than 1μA. Since the device has built-in LDO, it can be compatible with common input voltage (such as 3.3V or 5.0V) without logic power supply. CJDR9110T is an upgraded version of CJDR9110, with functions such as thermal shutdown, undervoltage protection, short circuit protection, overcurrent protection, automatic fault recovery, etc. One CJDR9110T can be used to drive a DC motor or two CJDR9110Ts can be used to drive a stepping motor. Therefore, CJDR9110T is very suitable for applications, providing an integrated motor drive solution for consumer products such as cameras, toys, or other battery powered motion control applications. 2 Applications • • • • • • • • Video Camera Digital Single Lens Reflective (DSLR) Lens Toys Robotics Shared Bicycle Lock Water Meter Switch Medical Equipment 3 Features • • Power supply input voltage: 3.8V~12V Output current: 1.5A for continuous operation 2.5A for peak current Low RDS ON: 350mΩ (HS + LS) • Pulse width modulation (PWM) input, compatible with common logic input levels of 3.3V and 5.0V Sleep mode low current consumption: nA level • • • Comprehensive protection: - Thermal shutdown - Undervoltage protection - Built-in current limit - Short circuit protection - Automatic fault recovery 4 Available Package PART NUMBER PACKAGE CJDR9110T ESOP8 Note: For more detailed packaging information, see the part Pin Configuration and Function and the part Mechanical Information. Figure 4-1. ESP8 Package Please carefully read the notice at the end of this data sheet about product use, data sheet changes and important statements. PDF
Документация на CJDR9110T 

CJDR9110T The data sheet of IC

Дата модификации: 29.12.2022

Размер: 971.4 Кб

13 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS3111D (RUIMENG)