APBDA3020QBDCGKC-GX

Kingbright
APBDA3020QBDCGKC-GX 3.0 x 2.0 mm Right Angle SMD LED DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the L...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Цвета свечения
Количество цветов в корпусе
Длина волны 1 цвета 574
Сила света 1 кристалла
Угол по горизонтали
Угол по вертикали
Тип линзы
Схема включения
Размер 3×2.8×2 мм
Рабочая температура
Примечания Dual Color LED, Green/blue, Water Clear, T-3/4, 1.9mm
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
APBDA3020QBDCGKC-GX 3.0 x 2.0 mm Right Angle SMD LED DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded Blue Green FEATURES 3.0 x 2.8 x 2.0 mm right angle SMD LED, 2.0 mm thickness Low power consumption Ideal for backlight and indicator Package: 2000 pcs / reel When soldered in the sideview configuration, the maximum shear tolerance of the epoxy lens is 300g Moisture sensitivity level: 3 Tinned pads for improved solderability RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE Part Number Emitting Color (Material) Lens Type ■ Blue (InGaN) Iv (mcd) @ 20mA [2] Min. Typ. 120 300 ■ Green (AlGaInP) 2θ1/2 15° Water Clear APBDA3020QBDCGKC-GX Viewing Angle [1] 120 300 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. © 2017 Kingbright. All Rights Reserved. Spec No: DSAL0178 / 1203011249 Rev No: V.8B Date: 06/30/2017 Page 1 / 4 PDF
Документация на APBDA3020QBDCGKC-GX 

APBDA3020QBDCGKC-GX(Ver.8B)

Дата модификации: 06.07.2017

Размер: 299.2 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    C503B-RCN-CW0Z0AA1 (CREE)