MT3411A-EN

MagnTek
MT3411-EN Latch, Hall-Effect Magnetic Position Sensor 1 Product Description The MT3411-EN family is produced by BCD technology with both high performance and high reliability. The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator for operation with supply voltage of 2.8V to 24V, a smallsignal amplifier, Hall sensors with dynamic offset cancellation, a schmitt tr...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус TO-92-3
Тип датчика
Рабочая температура
Монтаж
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
MT3411-EN Latch, Hall-Effect Magnetic Position Sensor 1 Product Description The MT3411-EN family is produced by BCD technology with both high performance and high reliability. The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator for operation with supply voltage of 2.8V to 24V, a smallsignal amplifier, Hall sensors with dynamic offset cancellation, a schmitt trigger and an open-drain output with over-current protection. It features temperature compensation technique to make the magnetic switching points stable over a wide temperature range. Other key features such as reverse supply voltage protection, output over-current protection and ESD level exceeding ±6KV (HBM) make the IC extremely robust and fault tolerant, which is important in demanding application environment such as automotive. Its extremely low operating supply voltage 2.8V also makes it possible to add external resistance in series with the supply pin for even greater protection against high voltage transients from the power supply. 4 Applications ￭ ￭ ￭ ￭ When the magnetic flux density (B) is greater than the operating point (BOP), the output turns on (Low). The output is held steady till the magnetic flux density (B) is less than the releasing point (BRP), at which point it turns off (High). 5. Pin Configuration and Functions 2 Features ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ Home appliances，Industrial DC Fan, Electric tools Magnetic Encoder Flow Sensor BCD Technology Latch Switch 2.8~24V Operating Vcc Range -40℃~150℃ Operating Temperature Magnetic Sensitivity Option: BOP=24Gs, BRP=-24Gs Internal pull-up resistor -27V Reversed Power Supply Protection Output Limiting Current Protection RoHS Compliant: (EU)2015/863 VCC Out GND SOT-23 1 2 3 SOT-23 (Thin Outline) 1 2 3 Flat TO-92 (Radial Lead) 1 3 2 Flat TO-92 1 3 2 Description Power Output Ground 1 Vcc 按钮 TO-92 Radial Lead Top-View TO-92 Top-View SOT-23, tape & reel (3000pcs/bag) OUT 3 GND 2 Vcc 1 OUT GND Vcc Figure.1 Note: MT3411AT-N-EN chip mark is 411N+date code magntek.com.cn | Magnetic Tech Makes Magic Change 3 按钮 MT3411AT-NEN GND OUT MT3411AT-EN SOT-23, tape & reel (3000pcs/bag) OUT 22 Flat TO-92, radial lead, bulk packaging (1000pcs/bag) 2 3 3 MT3411A-T-EN GND Flat TO-92, bulk packaging (1000pcs/bag) Vcc MT3411A-EN 11 Description SOT-23 Thin Outline Top-View SOT-23 Top-View 3 Product Overview of MT3411-EN Part No. Open-Drain 1 Pin Configuration & Functions Rev 2.2 3 2 1 PDF
Документация на MT3411A-EN 

PowerPoint 演示文稿

Дата модификации: 14.05.2021

Размер: 477.4 Кб

11 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MMC5603NJ (MEMSIC)