ME2215AP5G

Nanjing Micro One Electronics Inc.
ME2215 1A LED Driver with Internal Switch ME2215 General Description Features The ME2215 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 36V and provides an externally adjustable output current of up to 1A. Dep...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOT895
Рабочая частота
Выходной ток
Диапазон входных напряжений
Тип преобразователя
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i F раб Iвых Uвых(макс) Uвх Выход Тип Примечание T раб Карточка
товара
P= PT4115 (YOUTAI)
 
SOT895 в ленте 1000 шт
 

Файлы 1

показать свернуть
ME2215 1A LED Driver with Internal Switch ME2215 General Description Features The ME2215 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 36V and provides an externally adjustable output current of up to 1A. Depending upon supply voltage and external components, this can provide up to 30 watts of output power. The ME2215 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be adjusted below the set value, by applying an external control signal to the VSET pin. The VSET pin will accept either a DC voltage or a PWM waveform. The soft-start time can be increased using an external capacitor from the VSET pin to ground. Applying a voltage of 0.2V or lower to the VSET pin turns the output off and switches the device into a low current standby state.     Typical Application Package     Simple low parts count Internal 40V NDMOS switch 1A output current Single pin on/off and brightness control Using DC voltage or PWM Soft-start High efficiency (up to 97%) Wide input voltage range: 6V to 36V Open LED Protection Short LED Protection Up to 1MHz switching frequency Typical 5% output current accuracy        Low voltage halogen replacement LEDs Low voltage industrial lighting LED back-side lighting 5-pin SOT89-5 Typical Application Circuit D Rs 0.3Ω VIN C 10uF ISENSE L 100uH ME2215 VSET LX GND V05 www.microne.com.cn Page 1 of 9 PDF
Документация на ME2215AP5G 

High Speed LDO Regulators, Low ESR Cap

Дата модификации: 06.02.2018

Размер: 795.3 Кб

9 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.