IA1209KS-1WR3

Mornsun
DC/DC Converter IA_KS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, regulated dual output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 73%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out Patent Protection RoHS IA_KS-1WR3 series is specially des...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 27.5×9.5×12 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
DC/DC Converter IA_KS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, regulated dual output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 73%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out Patent Protection RoHS IA_KS-1WR3 series is specially designed for applications where two isolated voltage is required in a distributed power supply system. They are suitable for occasions of: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Input Voltage (VDC) Certification Part No. IA1205KS-1WR3 -- IA1209KS-1WR3 IA1212KS-1WR3 Nominal (Range) 12 (11.4-12.6) Output Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF)* Max. ±5 ±100/±10 69/73 1200 ±9 ±56/±6 69/73 470 ±12 ±42/±5 69/73 220 Note: *The specified maximum capacitive load for positive and negative output is identical. Input Specifications Item Operating Conditions Input Current (full load / no-load) 12V input Min. Reflected Ripple Current* Typ. Max. -- 115/8 121/-- -- 15 -- Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Voltage Accuracy Min. Typ. Max. Unit -- -- ±3 Linear Regulation Input voltage change: ±1% -- -- ±0.25 Load Regulation 10%-100% load -- -- ±2 Ripple & Noise* 20MHz bandwidth -- 30 100 mVp-p Temperature Coefficient 100% load -- ±0.02 -- %/℃ Short-circuit Protection % Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 1500 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF 2021.10.08-A/0 Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на IA1209KS-1WR3 

IA_KS-1WR3_EN IA_KS-1WR3

Дата модификации: 08.10.2021

Размер: 1.11 Мб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCWN03B-15 (MW)