KAP05T-3A

Mornsun
DC/DC Converter KAP05T-3A Regulated single output DC-DC converter ultra-thin DFN package FEATURES  Ultra-small, ultra-thin DFN package(2*2.5*1.4 mm)  Operating ambient temperature range: -40℃ to +85 ℃  High efficiency up to 94.5%  No-load input current as low as 35 uA  Output short-circuit protection Patent Protection RoHS KAP05T-3A is high efficiency switching regulators. The converters...
развернуть ▼ свернуть ▲
Внешний вид KAP05T-3A

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 2.5×2×1.4 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
DC/DC Converter KAP05T-3A Regulated single output DC-DC converter ultra-thin DFN package FEATURES  Ultra-small, ultra-thin DFN package(2*2.5*1.4 mm)  Operating ambient temperature range: -40℃ to +85 ℃  High efficiency up to 94.5%  No-load input current as low as 35 uA  Output short-circuit protection Patent Protection RoHS KAP05T-3A is high efficiency switching regulators. The converters feature high efficiency, low loss and short-circuit protection in a compact DFN package. These products are widely used in applications such as industrial control, instrumentation and electric power. Selection Guide Input Voltage (VDC)* Certification -- Part No. KAP05T-3A Output Full Load Capacitive Nominal (Range) Voltage (VDC) Current (mA) Max. Efficiency (%) Typ. Load (µF) Vin=5.0V, Vo=4.0V Max. 5 （2.5~5.5） 0.6-4.0 3000 94.5% 470 Note: ①When the input voltage peak exceeds 6VDC, the input end needs to be connected with an external 47uF/16V electrolytic capacitor to prevent the module damage caused by the voltage peak; ②When the output voltage Vo > 3.3V, the maximum output current is 2000mA； ③Ensure that the input-output pressure difference is greater than or equal to 0.5V. Input Specifications Item Operating Conditions Input Current (no-load) Vin=5V，Vo=1.2V，Io=0A Min. Typ. Max. Unit -- 35 -- uA Reverse Polarity at Input Avoid / Not protected Input Filter ENl* Note: Capacitance filter Module on Ctrl pin pulled high(TTL (1.2~VIN) Module off Ctrl pin pulled low to GND (0~0.4VDC) Input current when off -- 0.05 -- uA Unit *The EN pin voltage is referenced to input GND and cannot be suspended. Output Specifications Item Operating Conditions Min. Typ. Max. Voltage Accuracy Full load, input voltage range -- ±1 ±3 Linear Regulation Full load, input voltage range -- 0.5 1 Load Regulation Nominal input voltage, 0% -100% load -- 1 2 Ripple & Noise* 20MHz bandwidth, nominal input voltage, full load -- 30 60 mVp-p Temperature Coefficient Operating temperature -40℃ to + 85℃ -- ±0.02 -- %/℃ -- ±50 ±120 mV -- 100 500 us Transient Response Deviation Transient Recovery Time Short-circuit Protection Nominal input voltage, 25% load step change % Continuous, self-recovery Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information; 2025.02.06-A/2 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на KAP05T-3A 

KAP05T-3A Keywords:

Дата модификации: 06.02.2025

Размер: 1.7 Мб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCWN03B-15 (MW)