LIR40-40

Mornsun
DC/DC Parallel Redundancy Module LIR40-40 FEATURES Input voltage range: 9-60VDC Operating ambient temperature range: -40℃ to +85℃ High efficiency up to 98% 1500VAC insulation voltage Built-in DC OK signal and alarm relay contact Double side conformal coating Operating altitude up to 5000m Supporting for N+1 parallel redundancy Safety according to UL/IEC62368, UL61010/508, ATEX, IECEx, EN61558,...
развернуть ▼ свернуть ▲
Внешний вид LIR40-40

Технические характеристики

показать свернуть
Выходная мощность на канал
Количество каналов
Выходное напряжение
Входное напряжение
Выходной ток
Конструктив
Степень IP
Размер 54×124×110 мм
Рабочая температура
Особенности
Применение
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
DC/DC Parallel Redundancy Module LIR40-40 FEATURES Input voltage range: 9-60VDC Operating ambient temperature range: -40℃ to +85℃ High efficiency up to 98% 1500VAC insulation voltage Built-in DC OK signal and alarm relay contact Double side conformal coating Operating altitude up to 5000m Supporting for N+1 parallel redundancy Safety according to UL/IEC62368, UL61010/508, ATEX, IECEx, EN61558, EN62477, IEC/UL60664  3 years warranty          RoHS Report EN62368-1 BS EN62368-1 LIR40-40 is one of Mornsun Din-rail parallel redundancy module. It is used with Mornsun high-end Din-rail series 240W/480W/960W and other series, it features wide input voltage range, wide operating temperature, cost-effective, high efficiency and high reliability. It offers excellent EMC performance and meet UL/IEC/EN62368, UL61010/508, ATEX, EN61558, IECEx, EN62477, IEC/UL60664 standards and it is widely used in areas of industrial, electricity, security, telecommunications etc. Selection Guide Certification Part No. Voltage Drop Vin-Vo (V/Typ.) Nominal Output Current (A) Max. Efficiency (24/48VDC, %/Typ.) EN LIR40-40 0.2 40 98 Note: *The rated voltage difference of the product is related to the input voltage and load condition, the higher the load, the higher the voltage difference. Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Voltage Range DC input 9 12/24/48 60 VDC Input Current Range Each input 0-40A, continuous -- -- 40 A Input peak current Each input 0-40A for 5s without damage -- -- 60 A Hot Plug Unavailable Note: *LED state: Vin1 triggers the under-voltage alarm, Vin1 LED turns off, Vin2 LED turns on; Vin1 triggers the over-voltage alarm, Vin1 LED turns on, Vin2 LED turns off. Output Specifications Item Operating Conditions Ripple & Noise* 20MHz bandwidth (peak-to-peak value) Output Power 48V/40A Min. Typ. Max. Unit -- 200 -- mV -- 1920 -- W DC OK function is normal (relay on), two input LED indicator light on DC OK Function The two input voltages are normal LED1 (Vin1 OK) ON Vin1 input OK LED2 (Vin2 OK) ON Vin2 input OK Note: *The “Tip and barrel method” is used for ripple and noise test, output parallel 47uF electrolytic capacitor and 0.1uF ceramic capacitor, please refer to AC-DC Converter Application Notes for specific information. General Specifications Item Isolation Test Insulation Resistance Operating Conditions Min. Typ. Max. Input output - Electric strength test for 1min., leakage current < 2mA 1500 -- -- VAC Input output - At 500VDC 100 -- -- MΩ Operating Temperature -40 -- +85 Storage Temperature -40 -- +85 2024.04.26-A/1 Unit ℃ Page 1 of 6 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на LIR40-40 

LIR40-40_EN Keywords:

Дата модификации: 02.05.2025

Размер: 4.89 Мб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DRDN20-12 (MW)