T1100N

Mornsun
Lsolated transmitter T1100N/NS Series Passive high precision isolated transmitter FEATURES Two-port isolation (signal input and signal output) High precision (0.1% Full Scale) High linearity (0.1% Full Scale) Isolation test voltage 3kVDC for 60s Extremely low temperature coefficient of 35PPM/℃ Industrial grade (Operating ambient temperature range -25℃ to +71℃)  High reliability with MTBF >...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип Passive high precision isolated transmitter
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
Lsolated transmitter T1100N/NS Series Passive high precision isolated transmitter FEATURES Two-port isolation (signal input and signal output) High precision (0.1% Full Scale) High linearity (0.1% Full Scale) Isolation test voltage 3kVDC for 60s Extremely low temperature coefficient of 35PPM/℃ Industrial grade (Operating ambient temperature range -25℃ to +71℃)  High reliability with MTBF >500,000 hours  Low voltage-drop of 3V typical at 20mA input       RoHS EN 62368-1 T1100N/NS series are passive signal isolation modules with a standard analog amplifier, 4-20mA current signal input and 4-20mA current signal output. This accurate isolated voltage signal to 4-20mA current conversion can be used in a variety of analog instrument input ports such as PLC and DCS systems, or similar. In addition, this module has extremely small SIP9 form factor with excellent temperature drift characteristics of less than 35PPM / ℃ across the entire -25℃ to +71℃ operating temperature range. This module adopts unique electromagnetic isolation mode that allows it to withstand 3kVDC isolation test voltage between input and output. Selection Guide Part No. Power Supply input(VDC) Input Signal Output Signal Isolated Power Output (VDC) T1100N None 4-20mA 4-20mA None T1100NS-W None 4-20mA 4-20mA None Certification EN Input Specifications Item Power Supply Input Signal Input Operating Conditions Value Power supply None Input power None Power supply protection None Input signal 4-20mA Maximum continuous over range ≤50mA Voltage drop-out @20mA 3V (Typ.) Operating Conditions Value Output signal 4-20mA Load capacity @20mA ≤300Ω Load regulation ＜0.05% meas.val./100Ω Operating Conditions Value Output Specifications Item Signal Output Transmission Specifications Item Zero Offset 0.1%FS Signal Precision 0.1%FS Temperature Coefficient Operating temperature range: -25℃ to +71℃ 0.0035%FS/℃ Operating Conditions Value General Specifications Item Two-port isolation (signal input and signal output) Electric Isolation Isolation Test Electric strength test for 1 minute with a leakage current of <1mA, humidity <70%RH 3kVDC 2021.07.28-C/9 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на T1100NS-W 

T1100(N)NS Keywords:

Дата модификации: 28.12.2021

Размер: 1.01 Мб

4 стр.

Lsolated transmitter T1100N/NS Series Passive high precision isolated transmitter FEATURES Two-port isolation (signal input and signal output) High precision (0.1% Full Scale) High linearity (0.1% Full Scale) Isolation test voltage 3kVDC for 60s Extremely low temperature coefficient of 35PPM/℃ Industrial grade (Operating ambient temperature range -25℃ to +71℃)  High reliability with MTBF >500,000 hours  Low voltage-drop of 3V typical at 20mA input       RoHS EN 62368-1 T1100N/NS series are passive signal isolation modules with a standard analog amplifier, 4-20mA current signal input and 4-20mA current signal output. This accurate isolated voltage signal to 4-20mA current conversion can be used in a variety of analog instrument input ports such as PLC and DCS systems, or similar. In addition, this module has extremely small SIP9 form factor with excellent temperature drift characteristics of less than 35PPM / ℃ across the entire -25℃ to +71℃ operating temperature range. This module adopts unique electromagnetic isolation mode that allows it to withstand 3kVDC isolation test voltage between input and output. Selection Guide Part No. Power Supply input(VDC) Input Signal Output Signal Isolated Power Output (VDC) T1100N None 4-20mA 4-20mA None T1100NS-W None 4-20mA 4-20mA None Certification EN Input Specifications Item Power Supply Input Signal Input Operating Conditions Value Power supply None Input power None Power supply protection None Input signal 4-20mA Maximum continuous over range ≤50mA Voltage drop-out @20mA 3V (Typ.) Operating Conditions Value Output signal 4-20mA Load capacity @20mA ≤300Ω Load regulation ＜0.05% meas.val./100Ω Operating Conditions Value Output Specifications Item Signal Output Transmission Specifications Item Zero Offset 0.1%FS Signal Precision 0.1%FS Temperature Coefficient Operating temperature range: -25℃ to +71℃ 0.0035%FS/℃ Operating Conditions Value General Specifications Item Two-port isolation (signal input and signal output) Electric Isolation Isolation Test Electric strength test for 1 minute with a leakage current of <1mA, humidity <70%RH 3kVDC 2021.07.28-C/9 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на T1100N 

Subject:

Дата модификации: 23.08.2021

Размер: 1.01 Мб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    T1100L-F (MORNSUN)