T1100RNS

Mornsun
PASSIVE SIGNAL AMPLIFIER Iin&Iout T1100RN/RNS/N/NS DESCRIPTION PRODUCT PROGRAM T1100 series, a standard analog amplifier, with 4~20mA current signal input and 4~20mA current signal output, is a passive signal isolation module. Adopting unique Isolation Channels Power Output Part Number Power Supply Input Output T1100RN None 4~20mA 4~20mA None 1 DIP16 SOIC16 Package...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус —
Напряжение изоляции RMS
Кол-во передатчиков
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
PASSIVE SIGNAL AMPLIFIER Iin&Iout T1100RN/RNS/N/NS DESCRIPTION PRODUCT PROGRAM T1100 series, a standard analog amplifier, with 4~20mA current signal input and 4~20mA current signal output, is a passive signal isolation module. Adopting unique Isolation Channels Power Output Part Number Power Supply Input Output T1100RN None 4~20mA 4~20mA None 1 DIP16 SOIC16 Package T1100RNS None 4~20mA 4~20mA None 1 technology, T1100N None 4~-20mA 4~20mA None 1 DIP16 independent power supply is not required for the T1100NS None 4~20mA 4~20mA None 1 SOIC16 electromagnetism isolation design and high efficiency module, loop realizing electric-larceny 4~20mA standard signal isolation with high accuracy and linearity. Besides, the modules have extremely low ELECTRICAL CHARACTERISTICS temperature drift (no more than 35ppm/°C under -25°C~ +71°C). The isolation voltage between the input and output can be up to 3KVDC. Power Supply Parameter Input Parameter FEATURES ● Two-port isolation (Between input and output) ● High accuracy (0.1% F.S.) Output Param eter ● High linearity (0.1% F.S.) Power Supply None Power Consumption None Power Protection None Input Signal 4~20mA Overload ≤50mA Voltage Drop-out Typ: 3V(@input = 20mA) Output Signal 4~20mA Load Capacity ≤300Ω (@output = 20mA) Load Regulation <0.05% meas.val./100Ω ● Isolation voltage(3kVDC/60s) ● Low voltage-drop(3V typ: @ 20mA input) ● High frequency response TRANSMISSION CHARACTERISTICS ● Extremely low temperature(35PPM/°C) Zero Offset 0.1%F.S. Gain Error 0.1%F.S. Temperature Drift 0.0035%F.S./°C(-25°C ~ +71°C) ● Industry standard(Operating Temperature Range:-25°C ~ 71°C) ● High reliability(MTBF>500,000 hours) MODEL SELECTION ISOLATION CHARACTERISTICS Galvanic Isolation Two-port isolation ( Between input and output) Isolation Voltage 3KVDC (Tested for 1minute and leakage current < 1mA, humidity < 70%) Insulation Resistance 100MΩ,500VDC(Between input and output) OTHER CHARACTERISTICS MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: 86-20-28203030 Fax:86-20-28203068 Http://www.mornsun-power.com Ambient temperature Operation temperature: -25 ~ +71°C Package DIP16/SOIC16 Weight About 8g Application Environment No dust, fierce vibration, impulsion and corrosive gas Transport and Storage temperature: -50 ~ +105°C Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions. The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. T1100RN/RNS/N/NS B/3-2011 Page 1 of 2 PDF
Документация на T1100RN 

T1100_RN_S_EN.doc

Дата модификации: 07.11.2011

Размер: 223.3 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    TDA51S-41HC (MORNSUN)