TE5550CN

Mornsun
Signal conditioning modules TExxxxCN Series Active high precision signal conditioning module FEATURES  Two-port isolation (signal input and signal output) High accuracy of 0.1% Full Scale High linearity of 0.1% Full Scale Isolation test voltage 2kVAC for 60s Low ripple & noise: ≤35mVpp, 20MHz Extremely low temperature coefficient of ≤50PPM/℃  Industrial grade operating temperature range...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип Active high precision signal conditioning module
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Signal conditioning modules TExxxxCN Series Active high precision signal conditioning module FEATURES  Two-port isolation (signal input and signal output) High accuracy of 0.1% Full Scale High linearity of 0.1% Full Scale Isolation test voltage 2kVAC for 60s Low ripple & noise: ≤35mVpp, 20MHz Extremely low temperature coefficient of ≤50PPM/℃  Industrial grade operating temperature range from -40℃ to +85℃  Compact DIP18 package, size 26 x 9.5 x 12.5mm  ESD protection (IEC/EN61000-4-2 Contact ±4kV with performance perf. Criteria B)      EN62368-1 RoHS TExxxxAN series are analog signal isolation modules with incoming positive/negative signal input and transformed positive/negative signal output. They are equipped with an efficient built-in micro-power source that supplies additionally power to the internal input signal circuitry. The adopted electromagnetic isolation technology has a better performance, a much higher accuracy and a lower temperature drift in comparison with photo/opto-coupler isolators. This type of product has in addition to low temperature drift and high linearity, a low power consumption and low ripple & noise. They have a two-terminal isolation from signal input to signal output/power input. Selection Guide Certification EN Model Power Supply Input Typ. (VDC) Input Signal Output Signal Isolated Power Output (VDC) TE5540CN 15VDC ±10V ±10V None TE5550CN 12VDC ±10V ±10V None TE6640CN 15VDC ±5V ±5V None TE6650CN 12VDC ±5V ±5V None Input Specifications Item Power Input Operating Conditions Input Voltage Input Power Signal full load Min. Typ. Max. Unit Typ.-5% Typ. Typ.+5% VDC -- 1.0 W -- Input Signal Signal Input See selection guide Input Impedance In case of max. input of voltage signal 10 -- -- MΩ Over Range Maximum continuous over range -15 -- +15 V Operating Conditions Min. Typ. Max. Unit Output Specifications Item Output Signal Output Signal Load Capacity Ripple & Noise See selection guide Voltage output 2 -- -- kΩ 20MHz bandwidth -- -- 35 mVp-p Min. Typ. Max. Unit Transmission Specifications Item Operating Conditions Signal Precision Ta=25℃ -0.1%FS -- +0.1%FS -- Power regulation Power supply input Typ. ±5% -0.05%FS -- +0.05%FS -- Load regulation Change from no-load to full load -0.05%FS -- +0.05%FS -- Temperature Coefficient Operating temperature range from -40℃ to +85℃ -- -- 50 PPM/℃ Bandwidth 2 -- -- kHz Response time -- -- 1 ms 2021.09.06-A/4 Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на TE6650CN 

TExxxxCN Keywords:

Дата модификации: 28.12.2021

Размер: 947.5 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    TE1S60N-3.3 (MORNSUN)