Вход / Регистрация

TTLDE05-20B05D

Mornsun
AC/DC Transformer TTLDE05-20BxxD Series 4000VAC isolation test voltage, EE10, FEATURES flyback transformer  85 ~ 264VAC wide input voltage range  EE10 Bobbin  Meets UL/EN 62368 standards RoHS TTLDE05-20BxxD transformer series feature with 4000VAC primary to secondary isolation, an operating ambient temperature range of -40℃ ~ +110℃. It can be used with our control IC SCM1703ASA to achieve f...
развернуть ▼ свернуть ▲
Внешний вид серии TTLDE05-20B

Технические характеристики

показать свернуть
Применение Flyback transformer for SCM1703A
Габарит
Тип монтажа
Коэффициент трансформации
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i Применение Габарит Монтаж Коэффициент T раб Карточка
товара
F~ LD05-23B05R2 (MORNSUN)
 
— 1 шт

Файлы 1

показать свернуть
AC/DC Transformer TTLDE05-20BxxD Series 4000VAC isolation test voltage, EE10, FEATURES flyback transformer  85 ~ 264VAC wide input voltage range  EE10 Bobbin  Meets UL/EN 62368 standards RoHS TTLDE05-20BxxD transformer series feature with 4000VAC primary to secondary isolation, an operating ambient temperature range of -40℃ ~ +110℃. It can be used with our control IC SCM1703ASA to achieve flyback power supply design with wide input volatge range and various protection functions and superior EMI performance. Selection Guide Part No. Input Voltage (VAC) Output Voltage (VDC) Output Current (mA) Auxiliary Voltage (VDC) Auxiliary Current (mA) Typical Power (W) Typical Operating Frequency (kHz) TTLDE05-20B05D 85 ~ 264 5 1000 25.00 20 5 65 TTLDE05-20B12D 85 ~ 264 12 420 18.36 20 5 65 Note: Refer to Schematic for pins and phase points of the transformers. Electrical Specifications Inductance (uH) Input Leakage Inductance Inductance Max. DCR(mΩ) Typ. ① Part No. N1 N2 N3 K (Flux Density Factor) (Gauss/A) TTLDE05-20B05D 1140.00±10% 100.00 3680 54 1340 7773 TTLDE05-20B12D 1140.00±10% 100.00 3680 207 897 7773 Notes: ①The test signal of the inductance are 10kHz and 100mV, test the leakage inductance of N1 based on N2 and N3 are shorted; ②To ensure the transformer will not saturate in all of the applications and conditions, the peak flux density(Bm) should remain below 3000Gauss. Use the following formula to calculate the peak flux density: Bm=K*Ipk, Ipk stands for the peak current of input, which unit is A; ③Approximate transformer core loss(Pcv) can be calculated as following formula: Pcv=3.9E-14*f1.82* △ B2.59, the unit of Pcv is W, f stands for operating frequency, which unit is kHz, △B is the operating flux density, which unit is Gauss. △B can be calculated as: △B=K*△I. General Specifications Item Operating Conditions Min. N1, N3 to N2 Electric Strength Test for1 minute, leakage current <5mA 4000 -- -- VAC N1 to N3 Electric Strength Test for1 minute, leakage current <1mA 1000 -- -- VDC Operating Temperature -40 -- +110 Storage Temperature -40 -- +110 -- 95 Isolation ① ② Storage Humidity Soldering Temperature Non-condensing -- Typ. Max. 260 ± 5℃; time: 5 - 10s Manual-welding 360 ± 10℃; time: 3 - 5s 7.0 -- -- Clearance 6.4 -- -- Notes: ℃ %RH Wave-soldering Creepage Distance Unit mm ①The temperature of the transformer (ambient plus temperature rise) should be within the operating temperature range; ②The storage temperature of the transformer only. ③The isolation strap of the peripheral is designed to meet the clearance and creepage distance. Mechanical Specifications Weight TTLDE05-20B05D TTLDE05-20B12D 3.00g (Typ.) 2019.07.08-A/2 Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию TTLDE05-20B 

Subject:

Дата модификации: 15.08.2019

Размер: 407 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    LM-LP-1001L (BOURNS)