ELP-75-36-C

MEAN WELL
ELP-75 75W Single Output with PFC Function ■ Features : series User’s Manual Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 90% Optional L-Bracket and cover (ELP-75-x-C, x=3.3,5,12,15,24,36,48) Protections: Short circuit / Overload / Over voltage Cooling by free air convection1U low profile LED indicator for power on No load power co...
развернуть ▼ свернуть ▲
photo

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Количество выходов
Применение
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 5

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ LRS-75-36 (MW)
 
— 1 шт PWR SPLY,SW,ENCL,36V@2.1A,76W 85-264VAC,47-63HZ,91.5%EFF,UL КЗ, перегрузка, перенапряжение —
A+ HEP-100-36A (MW)
 
— 1 шт КЗ, перегрузка, перенапряжение, перегрев —
A+ HRP-75-36 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 75 Вт; Выход: 36 В; U1: 32...39.6 В; I1: до 2.1 ... ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение —
A+ LM75-20B36 (MORNSUN)
 
—
 
 КЗ, перегрузка, перенапряжение — — — — — AC-DC Regulated Power Supply Module, 1 Output, 75.6W, Hybrid
A+ LM75-22B36 (MORNSUN)
 
—
 
 КЗ, перегрузка, перенапряжение — — — — — — — AC-DC Regulated Power Supply Module

Файлы 2

показать свернуть
ELP-75 75W Single Output with PFC Function ■ Features : series User’s Manual Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 90% Optional L-Bracket and cover (ELP-75-x-C, x=3.3,5,12,15,24,36,48) Protections: Short circuit / Overload / Over voltage Cooling by free air convection1U low profile LED indicator for power on No load power consumption<0.5W 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION UL62368-1 OUTPUT ELP-75-5 ELP-75-12 ELP-75-15 ELP-75-24 ELP-75-36 ELP-75-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 36V 48V RATED CURRENT 15A 15A 6.25A 5A 3.15A 2.1A 1.6A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 6.25A 0 ~ 5A 0 ~ 3.15A 0 ~ 2.1A 0 ~ 1.6A RATED POWER 49.5W 75W 75W 75W 75.6W 75.6W 76.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 150mVp-p 240mVp-p 280mVp-p 300mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V ±2.0% 10.8 ~ 13.2V ±2.0% 13.5 ~ 16.5V ±2.0% 21.6 ~ 26.4V ±1.0% 32.4 ~ 39.6V ±1.0% 43.2 ~ 52.8V ±1.0% 3 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 2500ms, 50ms/230VAC 90% 90% 39.7 ~ 46.8V 53.3 ~ 64.8V HOLD UP TIME (Typ.) VOLTAGE RANGE 20ms/230VAC Note.6 90 ~ 264VAC FREQUENCY RANGE 20ms/115VAC at full load 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.8A/115VAC COLD START 60A/230VAC LEAKAGE CURRENT <1mA/240VAC OVER LOAD PROTECTION OVER VOLTAGE 2500ms, 50ms/115VAC at full load 127 ~ 370VDC POWER FACTOR (Typ.) Note.5 3.3V: PF>0.91/230VAC INPUT BS EN/EN62368-1 IEC62368-1 TPTC004 ELP-75-3.3 MODEL 5V~48V: PF>0.95/230VAC 82% 89% PF>0.98/115VAC at full load 90% 90% 1 A/230VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 20 ~ 90% RH non-condensing SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved EMC IMMUNITY 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55024, heavy industry level, criteria A, EAC TP TC 020 MTBF OTHERS DIMENSION PCB:175*60*27mm (L*W*H) with optional CASE:195*68.5*33mm (L*W*H) PCB:0.25Kg; 48pcs/13Kg/0.96CUFT with optional CASE:0.54Kg; 25pcs/14.5Kg/0.7CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. PACKING NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. 3.3V PF>0.92/230VAC, others PF>0.95/230VAC. 6. Derating may be needed under low input voltage. Please check the derating curve for more details. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:ELP-75-SPEC 2021-09-15 PDF
Документация на ELP-75-5-C 

ELP-75-20210915.cdr

Дата модификации: 17.09.2021

Размер: 170 Кб

2 стр.

ELP-75 75W Single Output with PFC Function series ■ Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 90% Optional L-Bracket and cover (ELP-75-x-C, x=3.3,5,12,15,24,36,48) Protections: Short circuit / Overload / Over voltage Cooling by free air convection1U low profile LED indicator for power on No load power consumption<0.5W 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 ELP-75-3.3 ELP-75-5 ELP-75-12 ELP-75-15 ELP-75-24 ELP-75-36 ELP-75-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 36V 48V RATED CURRENT 15A 15A 6.25A 5A 3.15A 2.1A 1.6A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 6.25A 0 ~ 5A 0 ~ 3.15A 0 ~ 2.1A 0 ~ 1.6A RATED POWER 49.5W 75W 75W 75W 75.6W 75.6W 76.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 150mVp-p 240mVp-p 280mVp-p 300mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V ±2.0% 10.8 ~ 13.2V ±2.0% 13.5 ~ 16.5V ±2.0% 21.6 ~ 26.4V ±1.0% 32.4 ~ 39.6V ±1.0% 43.2 ~ 52.8V ±1.0% MODEL OUTPUT 3 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 2500ms, 50ms/230VAC 90% 90% 39.7 ~ 46.8V 53.3 ~ 64.8V HOLD UP TIME (Typ.) VOLTAGE RANGE 20ms/230VAC Note.6 90 ~ 264VAC FREQUENCY RANGE 20ms/115VAC at full load 127 ~ 370VDC 47 ~ 63Hz POWER FACTOR (Typ.) Note.5 3.3V: PF>0.91/230VAC INPUT EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.8A/115VAC COLD START 60A/230VAC LEAKAGE CURRENT <1mA/240VAC OVER LOAD PROTECTION OVER VOLTAGE 2500ms, 50ms/115VAC at full load 5V~48V: PF>0.95/230VAC 82% 89% PF>0.98/115VAC at full load 90% 90% 1 A/230VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 20 ~ 90% RH non-condensing SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION UL60950-1, TUV EN60950-1 approved EMC IMMUNITY 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, heavy industry level, criteria A MTBF OTHERS DIMENSION PCB:175*60*27mm (L*W*H) with optional CASE:195*68.5*33mm (L*W*H) PCB:0.25Kg; 48pcs/13Kg/0.85CUFT with optional CASE:0.54Kg; 25pcs/14.5Kg/0.59CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. PACKING NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. 3.3V PF>0.92/230VAC, others PF>0.95/230VAC. 6. Derating may be needed under low input voltage. Please check the derating curve for more details. File Name:ELP-75-SPEC 2017-07-07 PDF
Документация на серию ELP-75 

ELP-75-20150806.cdr

Дата модификации: 05.07.2017

Размер: 163.5 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155A (MW)