EPS-35-48

AC/DC преобразователи открытого типа
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности компактный дизайн, базовая модель
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 76×51×24 мм
Рабочая температура
Примечание Собственное энергопотребление <0.3 Вт при отключении нагрузки
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 4

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ EPS-45S-48 (MW)
 
1 шт компактный дизайн, базовая модель КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ RPS-45-48 (MW)
 
на поддоне 20 шт компактный дизайн, базовая модель КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 45.1W, Hybrid
A+ LO45-20B48MU (MORNSUN)
 
 
КЗ, перегрузка, превышение выходного напряжения AC-DC Regulated Power Supply Module
A+ LO45-20B48SMU (MORNSUN)
 
 
КЗ, перегрузка, перенапряжение

Файлы 2

показать свернуть
EPS-35 35W Single Output Switching Power Supply series User’s Manual ■ Features : Universal AC input / Full range High efficiency up to 90% Protections: Short circuit / Overload / Over voltage Cooling by free air convection 3"×2" compact size LED indicator for power on No load power consumption<0.3W 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 UL62368-1 EPS-35-5 EPS-35-7.5 EPS-35-12 EPS-35-15 EPS-35-24 EPS-35-27 EPS-35-36 EPS-35-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 27V 36V 48V RATED CURRENT 6A 6A 4.7A 3A 2.4A 1.5A 1.3A 1A 0.75A CURRENT RANGE 0 ~ 6.6A 0 ~ 6.6A 0 ~ 5.2A 0 ~ 3.3A 0 ~ 2.65A 0 ~ 1.65A 0 ~ 1.45A 0 ~ 1.1A 0 ~ 0.82A RATED POWER 19.8W 30W 35.25W 36W 36W 36W 35.1W 36W 36W 33W 39W 39.6W 39.75W 39.6W 39.15W 39.6W 39.36W RIPPLE & NOISE (max.) Note.2 60mVp-p 70mVp-p 80mVp-p 100mVp-p 100mVp-p 180mVp-p 180mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 3.1 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±2.5% 4.75 ~ 5.5V ±2.0% 21.6 ~ 27V ±1.0% LINE REGULATION ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.0% 7.13 ~ 8.25V 10.8 ~ 13.5V 13.5 ~ 16.5V ±1.0% ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±1.0% ±0.5% ±0.5% 24.3 ~ 29.7V 32.4 ~ 39.6V 43.2 ~ 52.8V ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load 50ms/230VAC 16ms/115VAC at full load 89% 89% PEAK LOAD(10sec.) Note.6 21.78W HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT Note.5 85 ~ 264VAC 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.75A/115VAC OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OPERATING ALTITUDE Note.8 VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC OTHERS 82% 87% 84% 88% 90% COLD START 40A/230VAC <1mA/240VAC 115 ~ 170% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 39.7 ~ 46.8V 53.3 ~ 64.8V 3.7 ~ 4.6V 5.6 ~ 6.75V 8.63~ 10.5V 14 ~ 17V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃ ) 2000 meters 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC EMISSION EMC IMMUNITY MTBF 649.1K hrs min. DIMENSION 89% 0.5A/230VAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 PACKING NOTE ±0.5% 120 ~ 370VDC FREQUENCY RANGE LEAKAGE CURRENT (Note 4) IEC62368-1 EPS-35-3.3 MODEL OUTPUT BS EN/EN62368-1 TPTC004 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, heavy industry level, criteria A, EAC TP TC 020 MIL-HDBK-217F (25℃ ) 76.2*50.8*24mm (L*W*H) 0.085Kg; 120pcs/11.2Kg/0.94CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltage. Please check the static characteristics for more details. 6. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 7. EPS-35-24/27/36/48 without Hs1. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:EPS-35-SPEC 2021-09-15 PDF
Документация на EPS-35-7.5 

EPS-35-20210915.cdr

Дата модификации: 23.09.2021

Размер: 80.3 Кб

2 стр.

EPS-35 35W Single Output Switching Power Supply ¡ ¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡ E series Features : Universal AC input / Full range High efficiency up to 90% Protections: Short circuit / Overload / Over voltage Cooling by free air convection ¡Ñ 3" 2" compact size LED indicator for power on No load power consumption<0.3W 3 years warranty SPECIFICATION EPS-35-3.3 EPS-35-5 EPS-35-7.5 EPS-35-12 EPS-35-15 EPS-35-24 EPS-35-27 EPS-35-36 EPS-35-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 27V 36V 48V RATED CURRENT 6A 6A 4.7A 3A 2.4A 1.5A 1.3A 1A 0.75A CURRENT RANGE 0 ~ 6.6A 0 ~ 6.6A 0 ~ 5.2A 0 ~ 3.3A 0 ~ 2.65A 0 ~ 1.65A 0 ~ 1.45A 0 ~ 1.1A 0 ~ 0.82A RATED POWER 19.8W 30W 35.25W 36W 36W 36W 35.1W 36W 36W 33W 39W 39.6W 39.75W 39.6W 39.15W 39.6W 39.36W RIPPLE & NOISE (max.) Note.2 60mVp-p 70mVp-p 80mVp-p 100mVp-p 100mVp-p 180mVp-p 180mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 2.0% 7.13 ~ 8.25V 10.8 ~ 13.5V 13.5 ~ 16.5V 21.6 ~ 27V 1.0% 1.0% 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.0% MODEL PEAK LOAD(10sec.) OUTPUT Note.6 21.78W 3.1 ~ 3.6V VOLTAGE TOLERANCE Note.3 2.5% ¡Ó Ó¡ 0.5% Ó¡ 1.5% LINE REGULATION LOAD REGULATION SETUP, RISE TIME INPUT ¡Ó Ó¡ Ó¡ ¡Ó ¡Ó ¡Ó Note.5 85 ~ 264VAC 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.75A/115VAC OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. 82% 84% 87% 88% 89% 89% 89% 90% <1mA/240VAC Protection type : Hiccup mode, recovers automatically after fault condition is removed 17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 39.7 ~ 46.8V 53.3 ~ 64.8V 3.7 ~ 4.6V 5.6 ~ 6.75V 8.63~ 10.5V 14 ~ 17V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 ¢J (Refer to "Derating Curve") UL60950-1, TUV EN60950-1 approved NOTE ¡Ó Ó¡ Ó¡ 115 ~ 170% rated output power SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC ¢J ¢J -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) ¡Ó ¢J 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ¢J EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY MTBF 649.1K hrs min. PACKING ¡Ó Ó¡ Ó¡ COLD START 40A/230VAC 20 ~ 90% RH non-condensing DIMENSION ¡Ó ¡Ó ¡Ó 0.5A/230VAC WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS ¡Ó ¡Ó ¡Ó 120 ~ 370VDC FREQUENCY RANGE LEAKAGE CURRENT (Note 4) ¡Ó Ó¡ Ó¡ 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load 50ms/230VAC 16ms/115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE ¡Ó ¡Ó0.5% ¡Ó1.0% 24.3 ~ 29.7V 32.4 ~ 39.6V 43.2 ~ 52.8V 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A ¢J MIL-HDBK-217F (25 ) 76.2*50.8*24mm (L*W*H) 0.085Kg; 120pcs/11.2Kg/0.97CUFT ¢J 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltage. Please check the static characteristics for more details. 6. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 7. EPS-35-24/27/36/48 without HS1. File Name:EPS-35-SPEC 2012-11-26 PDF
Документация на серию EPS-35 

EPS-35.cdr Keywords:

Дата модификации: 29.11.2012

Размер: 91.4 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.