NFM-15-5

MEAN WELL
AC/DC преобразователь: На печатную плату; 15 Вт; Выход 5В/3А; Вход: 85...264VAC / 120...370VDC; -20...70°C
развернуть ▼ свернуть ▲
Фотография серии NFM-15
Чертеж серии NFM-15
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
  Возможности: компактный дизайн, базовая модель, защита по II классу, источник открытого исполнения на ПП
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Применение
КПД
Шум
Размер 70×48×22 мм
Рабочая температура
Примечание AC-DC Regulated Power Supply Module
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 5

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
P- MFM-15-5 (MW)
 
— на поддоне 100 шт КЗ, перегрузка, перегрев, перенапряжение — — — AC-DC Regulated Power Supply Module, 1 Output, 15W, Hybrid
A+ MPM-15-5 (MW)
 
— 1 шт КЗ, перегрузка, перенапряжение, перегрев — — — — — AC-DC Regulated Power Supply Module
A+ IRM-15-5 (MW)
 
— на поддоне 240 шт компактный дизайн, базовая модель, защита по II классу, источник закрытого исполнения на ПП КЗ, перегрузка, перенапряжение — — AC-DC Regulated Power Supply Module, 1 Output, 15W, Hybrid
A+ LH20-23B05R2 (MORNSUN)
 
—
 
 КЗ, перегрузка, перенапряжение — —
A+ KAM1505 (CHINFA)
 
— 48 шт Преобразователь напряжения AC-DC, 15Вт, Uвх=85-265VAC, 47-63Гц, выход 5В/3А, подстр. Uв... базовая модель, источник закрытого исполнения на ПП — — Подстройка выхода с помощью внешнего Потенциометр внутреннийа

Файлы 2

показать свернуть
15W Single Output Medical Grade Switching Power Supply NFM-15 series ■ Features : Universal AC input / Full range Protections: Short circuit / Over load / Over voltage / Over temperature Ultra-miniature size, light weight Cooling by free air convection Isolation classⅡ Medical safety approved (2 x MOPP between primary to secondary) No load power consumption<0.5W 100% full load burn-in test Fixed switching frequency at 67KHz High reliability Suitable for BF application with appropriate system consideration 3 years warranty EN 60601-1 IEC 60601-1 SPECIFICATION 8 MODEL OUTPUT NFM-15-3.3 NFM-15-5 NFM-15-12 NFM-15-15 NFM-15-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 3.5A 3A 1.25A 1A 0.63A CURRENT RANGE 0 ~ 3.5A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.63A RATED POWER 11.55W 15W 15W 15W 15.12W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 150mVp-p 150mVp-p 240mVp-p VOLTAGE ADJ. RANGE 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V VOLTAGE TOLERANCE Note.3 ±2.0% 3 ~ 3.63V ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz 79% 81% EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.35A/115VAC LEAKAGE CURRENT 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC ND INPUT NR LINE REGULATION 76% 78% 0.2A/230VAC COLD START 30A/115VAC 50A/230VAC Note.6 Touch current < 80μ A/264VAC OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.5 WORKING TEMP. Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16.2V 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off o/p voltage, clamping by zener diode Tj 140℃ typically (U1) detect on main control IC 17.25 ~ 20.25V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1,TUV EN60601-1, IEC60601-1, UL60950-1, EAC TP TC 004 approved ISOLATION LEVEL SAFETY & WITHSTAND VOLTAGE Primary-Secondary: 2xMOPP I/P-O/P:4KVAC EMC (Note 4) OTHERS -40 ~ +85℃, 10 ~ 95% RH ISOLATION RESISTANCE EMC EMISSION I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011(CISPR11), EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A, EAC TP TC 020 DIMENSION 70*48*22mm (L*W*H) 0.065Kg; 120pcs/8.8Kg/0.97CUFT PACKING NOTE 27.6 ~ 32.4V 499.7Khrs min. MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. 6. Touch current was measured from primary input to DC output. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:NFM-15-SPEC 2018-01-12 PDF
Документация на NFM-15-12 

NFM-15-20180112.cdr

Дата модификации: 02.07.2019

Размер: 199.7 Кб

2 стр.

NFM-15 15W Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Over load / Over voltage / Over temperature Ultra-miniature size, light weight Cooling by free air convection Isolation class UL60601-1/IEC60601-1/EN60601-1 medical safety approved No load power consumption<0.5W 100% full load burn-in test Fixed switching frequency at 67KHz High reliability 3 years warranty EN60601-1 IEC60601-1 SPECIFICATION MODEL DC VOLTAGE NFM-15-3.3 NFM-15-5 NFM-15-12 NFM-15-15 NFM-15-24 3.3V 5V 12V 15V 24V RATED CURRENT 3.5A 3A 1.25A 1A 0.63A CURRENT RANGE 0 ~ 3.5A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.63A RATED POWER 11.55W 15W 15W 15W 15.12W 80mVp-p 150mVp-p 150mVp-p 240mVp-p 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V RIPPLE & NOISE (max.) Note.2 80mVp-p OUTPUT INPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.35A/115VAC OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.5 WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE 3 ~ 3.63V 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC 76% 78% 79% 81% 0.2A/230VAC COLD START 30A/115VAC 50A/230VAC Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off Tj 140 typically (U1) Detect on main control IC 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60601-1,TUV EN60601-1 Approved I/P-O/P:4KVAC I/P-O/P:100M Ohms/500VDC Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3 Medical level, criteria A 499.7Khrs min. MIL-HDBK-217F (25 ) 70*48*22mm (L*W*H) 0.065Kg; 120pcs/8.8Kg/0.97CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:NFM-15-SPEC 2006-12-18 PDF
Документация на серию NFM-15 

NFM-15.cdr

Дата модификации: 12.01.2007

Размер: 206.1 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155C (MW)