PB-1000-24

AC/DC преобразователь: В кожухе; 1000 Вт; Выход 24В/34.7А; Вход: 90...264VAC / 127...370VDC; -20...60°C
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности ККМ, зарядное устройство, температурная компенсация, дистанционное Вкл/Выкл
Типы защиты КЗ, переполюсовка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Размер 300×184×70 мм
Рабочая температура
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
P+ NPB-1200-24 (MW)
 
в коробках 2 шт КЗ, перенапряжение, перегрев, переполюсовка

Файлы 2

показать свернуть
PB-1000 1000W Intelligent Single Output Battery Charger ■ Features : Charger for lead-acid batteries (flooded, Gel and series User’s Manual AGM) and Li-ion batteries (lithium iron and lithium manganese) (Note.1) 2/3/8 stage charging selectable on output panel (Note 5) Built-in battery rescue function Universal AC input / Full range Controlled by microprocessor Built-in active PFC function PF>0.95 Protection: Reverse Polarity / Short circuit / Over voltage / Over temperature 3 color LED loading indicator Built-in remote ON-OFF control 2-Bank charger Temperature compensation function FAN on/off control (depends on charging current) 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT PB-1000-48 BOOST CHARGE VOLTAGE Vboost 14.4V 28.8V 57.6V FLOAT CHARGE VOLTAGE Vfloat 13.8V 27.6V 55.2V OUTPUT CURRENT 60A 34.7A 17.4A 200 ~ 600Ah 120 ~ 350Ah 60 ~ 175Ah 88% 89% RECOMMENDED BATTERY CAPACITY(AMP HOURS)(Note 4) LEAKAGE CURRENT FROM BATTERY (Typ.) PROTECTION FUNCTION BS EN/EN62368-1 TPTC004 IEC62368-1 PB-1000-24 BATTERY TYPE INPUT UL62368-1 PB-1000-12 Open & Sealed Lead Acid <1mA VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC EFFICIENCY (Typ.) 85% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 12A/115VAC 25A/115VAC LEAKAGE CURRENT <3.5mA / 240VAC OVER VOLTAGE 16 ~ 18V 32 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down SHORT CIRCUIT YES, protected by internal circuit REVERSE POLARITY YES, protected by internal circuit REMOTE CONTROL Open: Normal work BATTER BANKS 2 banks (A & B) 127 ~ 370VDC 0.98/115VAC at full load 5.2A/230VAC 50A/230VAC 64.5 ~ 69.5V Short: Stop Charging FAST CHARGE 2 / 3 / 8 stage selectable CHARGER OK Relay contact rating(max.): 30V/1A resistive ; "Short" when the unit is working properly, "Open"when the unit is failure or the protection function is activating Relay contact rating(max.): 30V/1A resistive ; "Short" when the battery is full, "Open" when the battery is still charging OUTPUT OK TEMPERATURE COMPENSATION By NTC, compensate both banks at the same time WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 3) EMC EMISSION OTHERS 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.05%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/ EN62368-1 , EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/ EN55032 (CISPR32), BS EN/ EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55024, light industry level, criteria A, EAC TP TC 020 MTBF DIMENSION 127.4K hrs min. PACKING NOTE -20 ~ +60℃ (Refer to "Derating Curve") MIL-HDBK-217F (25℃) 300*184*70mm(L*W*H) 3.5Kg; 4pcs/15Kg/1.83CUFT 1. Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details. 2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 3. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 4. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. 5. Please choose the "3 stage" selection when the charger is used to charge the batteries and power the loads in the same time. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PB-1000-SPEC 2021- 08-20 PDF
Документация на PB-1000-48 

PB-1000.cdr

Дата модификации: 17.08.2021

Размер: 204.6 Кб

6 стр.

1000W Intelligent Single Output Battery Charger PB-1000 series Features : Controlled by microprocessor 2/8 stage charging selectable on output panel Universal AC input / Full range Built-in active PFC function PF>0.95 Protection: Reverse Polarity / Short circuit / Over voltage / Over temperature Charger for lead-acid batteries 3 color LED loading indicator Built-in remote ON-OFF control 2-Bank charger Temperature compensation function FAN on/off control (depends on charging current) 3 years warranty .. SPECIFICATION MODEL OUTPUT PB-1000-12 PB-1000-24 PB-1000-48 BOOST CHARGE VOLTAGE 14.4V 28.8V 57.6V FLOAT CHARGE VOLTAGE 13.8V 27.6V 55.2V OUTPUT CURRENT 60A 34.7A 17.4A 200 ~ 600Ah 120 ~ 350Ah 60 ~ 175Ah 88% 89% RECOMMENDED BATTERY CAPACITY(AMP HOURS)(Note 3) BATTERY TYPE LEAKAGE CURRENT FROM BATTERY (Typ.) INPUT Open & Sealed Lead Acid <1mA VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 85% POWER FACTOR (Typ.) 0.95/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 12A/115VAC 25A/115VAC LEAKAGE CURRENT <3.5mA / 240VAC OVER VOLTAGE 16 ~ 18V 32 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover 80 5 (12V), 85 5 (24V,48V) (TSW1: detect on heatsink of power transistor) OVER TEMPERATURE 85 5 (12V),75 5 (24V,48V) (TSW2 : detect on heatsink of o/p diode) PROTECTION 127 ~ 370VDC 0.98/115VAC at full load 5.2A/230VAC 50A/230VAC 64.5 ~ 69.5V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down SHORT CIRCUIT FUNCTION YES, protected by internal circuit REVERSE POLARITY YES, protected by internal circuit REMOTE CONTROL Open: Normal work BATTER BANKS 2 banks (A & B) FAST CHARGE 2 / 8 stage selectable Short: Stop Charging CHARGER OK Relay contact rating(max.): 30V/1A resistive ; "Short" when the unit is working properly, "Open"when the unit is failure or the protection function is activating OUTPUT OK Relay contact rating(max.): 30V/1A resistive ; "Short" when the battery is full, "Open" when the battery is still charging TEMPERATURE COMPENSATION By NTC, compensate both banks at the same time WORKING TEMP. -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved SAFETY STANDARDS SAFETY & EMC (Note 2) WITHSTAND VOLTAGE MTBF DIMENSION PACKING NOTE I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) HARMONIC CURRENT EMS IMMUNITY OTHERS I/P-O/P:3KVAC ISOLATION RESISTANCE 70%RH Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 127.4Khrs min. MIL-HDBK-217F (25 ) 300*184*70mm(L*W*H) 3.5Kg; 4pcs/15Kg/1.83CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 3. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. File Name:PB-1000-SPEC 2008-05-12 PDF
Документация на серию PB-1000 

PB-1000.cdr

Дата модификации: 20.06.2008

Размер: 322 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.