SD-350C-24 PBF

MEAN WELL
SD-350 350W Single Output DC-DC Converter series User’s Manual ■ Features : 2:1 wide input range Protections: Short circuit / Overload / Over voltage / Over temperature 1500VAC I/O isolation Forced air cooling by built-in DC Fan 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty SPECIFICATION MODEL OUTPUT SD-350B PROTECTION 5V 12V 24V 4...
развернуть ▼ свернуть ▲
Фотография серии SD-350
Чертеж серии SD-350
 
 

Технические характеристики

показать свернуть
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности DC-DC Regulated Power Supply Module, 1 Output, 350.4W, Hybrid
Комплекс защит OVER LOAD; OVER VOLTAGE; THERMAL
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Схема параллельного включения
Сертификаты медицинские
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 3

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- CHB300W-24S24 (CINCON)
 
— 50 шт
 
 — DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid OVER CURRENT; OVER VOLTAGE; INPUT UNDER VOLTAGE; THERMAL — — — — — — — — — — —
A- CHB350-24S24 (CINCON)
 
DIP24(stand)
 
 — DC-DC Regulated Power Supply Module, 1 Output, 350W, Hybrid OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE; THERMAL — — — — — — — — — — —
A- CHB350-48S24 (CINCON)
 
DIP24(stand)
 
 — DC-DC Regulated Power Supply Module, 1 Output, 350W, Hybrid OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE; THERMAL — — — — — — — — — — —

Файлы 2

показать свернуть
SD-350 350W Single Output DC-DC Converter series User’s Manual ■ Features : 2:1 wide input range Protections: Short circuit / Overload / Over voltage / Over temperature 1500VAC I/O isolation Forced air cooling by built-in DC Fan 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty SPECIFICATION MODEL OUTPUT SD-350B PROTECTION 5V 12V 24V 48V 5V 12V 24V 48V RATED CURRENT 57A 27.5A 14.6A 7.3A 60A 27.5A 14.6A 7.3A CURRENT RANGE 0 ~ 57A 0 ~ 27.5A 0 ~ 14.6A 0 ~ 7.3A 0 ~ 60A 0 ~ 27.5A 0 ~ 14.6A 0 ~ 7.3A RATED POWER 285W 330W 350.4W 350.4W 300W 330W 350.4W 350.4W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p 200mVp-p 100mVp-p 120mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC ±1.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.3% ±0.2% ±0.2% ±0.5% ±0.3% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 300ms, 50ms at full load VOLTAGE RANGE B:19 ~ 36VDC EFFICIENCY (Typ.) 74% 80% 80% 84% 76% 81% 81% 82% DC CURRENT (Typ.) INRUSH CURRENT (Typ.) 14.4A/24V 16A/24V 17.6A/24V 17.6A/24V 7.6A/48V 8.8A/48V 9.0A/48V 9.0A/48V 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V C:45A/48VDC D:72 ~144VDC D:45A/96VDC 105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover OVER VOLTAGE 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE C:36 ~ 72VDC OVERLOAD WORKING TEMP. OTHERS 4.5 ~ 5.5VDC VOLTAGE TOLERANCE Note.3 ±2.0% OVER TEMPERATURE (Note 4) SD-350C DC VOLTAGE LINE REGULATION INPUT AS/NZS62368-1 TPTC004 Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes EAC TP TC 004 approved, design refer to AS/NZS 62368.1 I/P-O/P:1.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020 209.4K hrs min. MIL-HDBK-217F (25℃) 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.9CUFT 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:SD-350-SPEC 2022-01-14 PDF
Документация на SD-350D-5 

SD-350-20220114.cdr

Дата модификации: 14.01.2022

Размер: 154.5 Кб

3 стр.

SD-350 350W Single Output DC-DC Converter series Features : 2:1 wide input range Protections:Short circuit/Over load/Over voltage/Over temperature 1500VDC I/O isolation Forced air cooling by built-in DC Fan 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty (for D type only) SPECIFICATION MODEL OUTPUT INPUT SD-350B 5V 12V 24V 48V 5V 12V 24V 48V RATED CURRENT 57A 27.5A 14.6A 7.3A 60A 27.5A 14.6A 7.3A CURRENT RANGE 0 ~ 57A 0 ~ 27.5A 0 ~ 14.6A 0 ~ 7.3A 0 ~ 60A 0 ~ 27.5A 0 ~ 14.6A 0 ~ 7.3A RATED POWER 285W 330W 350.4W 350.4W 300W 330W 350.4W 350.4W RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE 100mVp-p 120mVp-p 150mVp-p 200mVp-p 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC 1.0% 1.0% 1.0% 2.0% 1.0% 1.0% 1.0% 0.3% 0.2% 0.2% 0.5% 0.3% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 300ms, 50ms at full load VOLTAGE RANGE B:19 ~ 36VDC EFFICIENCY (Typ.) 74% 80% 80% 84% 76% 81% 81% 82% DC CURRENT (Typ.) INRUSH CURRENT (Typ.) 14.4A/24V 16A/24V 17.6A/24V 17.6A/24V 7.6A/48V 8.8A/48V 9.0A/48V 9.0A/48V 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE C:36 ~ 72VDC C:45A/48VDC D:72 ~144VDC D:45A/96VDC 105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW1) Detect on main power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes IEC60950-1 CB Approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,6,8; ENV50204 Light industry level, criteria A EMS IMMUNITY MTBF 209.4K hrs min. MIL-HDBK-217F (25 ) DIMENSION PACKING NOTE 200mVp-p 43 ~ 53VDC 0.5% WORKING TEMP. OTHERS 150mVp-p 23 ~ 30VDC 2.0% OVER TEMPERATURE (Note 4) 120mVp-p 11 ~ 16VDC VOLTAGE TOLERANCE Note.3 PROTECTION OVER VOLTAGE EMC 4.5 ~ 5.5VDC LINE REGULATION OVER LOAD SAFETY & SD-350C DC VOLTAGE 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:SD-350-SPEC 2006-08-22 PDF
Документация на серию SD-350 

\\Fileserver-s\doc-control\do

Дата модификации: 08.11.2006

Размер: 215.2 Кб

3 стр.

    Публикации 1

    показать свернуть
    06 июля 2021
    новость

    Держим старые цены на MEAN WELL весь июль!

    С 1 июля компания MEAN WELL в связи со сложной ситуацией на рынке электронных компонентов вынужденно повышает стоимость и сроки поставки продукции. Компэл для поддержки российских производителей замораживает на весь июль старые цены на широкий ряд... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCWN03B-15 (MW)