TKA30B-B

DC/DC преобразователи на печатную плату
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, перегрузки
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Напряжение 3 выхода
Ток 1 выхода
Ток 2 выхода
Ток 3 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 50.8×50.8×21 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
TKA30 25W DC-DC Triple Output Converter series ■ Features : 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation Built-in EMI filter Remote ON-OFF control Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case Epoxy encapsulated 100% burn-in test Approvals: FCC / EAC / CE / UKCA 2 years warranty SPECIFICATION ORDER NO. TKA30A-B TKA30B-B TKA30A-C TKA30B-C DC VOLTAGE +5V ±12V +5V ±15V CURRENT RANGE 700 ~ 3500mA ±62 ~ ±310mA 700 ~ 3500mA ±50 ~ ±250mA RATED POWER 25W ±0.5% ±1.0% ±1.0% 80% 82% 82% RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 ±0.5% OUTPUT LOAD REGULATION INPUT VOLTAGE ACCURACY +5V: ±2.0%, ±V1: ±5.0% SWITCHING FREQUENCY ±1.0% 100KHz min. VOLTAGE RANGE A: 9 ~ 18VDC EFFICIENCY (Typ.) 80% Full load A: 2.61A B: 1.27A C: 0.64A No load A: 40mA B: 18mA C: 10mA FILTER B: 18~36VDC C: 36~72VDC 82% 82% Pi network PROTECTION (Note. 5) ±1.0% Fuse recommended OVERLOAD SHORT CIRCUIT 110 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. -40 ~ +85℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS -40 ~ +105℃, 10 ~ 95% RH ±0.03% / ℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020 REMOTE CONTROL OTHERS TKA30C-C Note.4 +5V: ±2.0%, ±V1: ±5.0% DC CURRENT PROTECTION TKA30C-B EAC TP TC 020/2011 approved Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020 Power on: R.C ~-Vin > 4.5~5.5VDC or open, Power off: R.C~ -Vin <0.8VDC or short MTBF DIMENSION 100Khrs min. MIL-HDBK-217F(25℃) WEIGHT 110g 50.8*50.8*21.0mm or 2"*2"*0.82" inch (L*W*H) Derating Curve Pin Configuration Mechanical Specification Unit: mm (inch) 7 BOTTOM VIEW 12.7 ( 0.50 ) 21 ( 0.82 ) 8 SIDE VIEW 4 3 2 1 22.9 ( 0.90 ) 15.24 ( 0.60 ) 2.5( 0.10 ) 5.8 ( 0.23 ) 50.8 ( 2.00 ) 6 45.72 ( 1.80 ) 5 1.0ψ + 0.2/-0.1 Pin No. Output 1 2 3 4 5 6 7 8 R.C No Pin -Vin +Vin +Vout +5V COM -Vout 100 LOAD (%) 30.48 (1.20) 80 -40 0 25 50.8 ( 2.00) NOTE 50 71 85 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:TKA30-SPEC 2021-12-01 PDF
Документация на TKA30A-B PBF 

TKA30.cdr

Дата модификации: 25.11.2021

Размер: 63.7 Кб

1 стр.

TKA30 25W DC-DC Triple Output Converter series Features : 2:1 wide input range 4:1 wide input range (optional) 1000VDC I/O isolation Input Pi network filter Remote ON-OFF control Protections: Short circuit / Over load Free air convection Six-sided shield metal case Epoxy encapsulated 100% burn-in test 1 year warranty SPECIFICATION ORDER NO. TKA30A-B TKA30C-B TKA30A-C TKA30B-C TKA30C-C +5V 12V +5V 15V CURRENT RANGE 350 ~ 3500mA 31 ~ 310mA 350 ~ 3500mA 25 ~ 250mA RATED POWER 25W RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 0.5% OUTPUT LOAD REGULATION Note.4 +5V: 2.0%, V1: 5.0% VOLTAGE ACCURACY +5V: 2.0%, V1: 5.0% SWITCHING FREQUENCY 100KHz min. EXTERNAL TRIM Adj. RANGE INPUT 10% VOLTAGE RANGE A: 9 ~ 18VDC EFFICIENCY (Typ.) 80% Full load A: 2.61A B: 1.27A C: 0.64A No load A: 40mA B: 18mA C: 10mA DC CURRENT B: 18~36VDC C: 36~72VDC 82% 82% 80% 82% FILTER Pi network REMOTE CONTROL Power on: R.C ~-Vin > 4.5~5.5VDC or open, Power off: R.C~ -Vin <0.8VDC or short 105 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER LOAD PROTECTION (Note. 5) TKA30B-B DC VOLTAGE SHORT CIRCUIT WORKING TEMP. -25 ~ +85 WORKING HUMIDITY 20% ~ 90% RH non-condensing 82% (Refer to output load derating curve) ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC MTBF OTHERS DIMENSION I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC 100khrs min. MIL-HDBK-217F(25 ) 50.8*50.8*21.0mm or 2"*2"*0.82" inch (L*W*H) 110g WEIGHT Derating Curve Pin Configuration Mechanical Specification Unit: mm (inch) 7 BOTTOM VIEW 12.7 ( 0.50 ) 21 ( 0.82 ) 8 SIDE VIEW 4 3 2 1 22.9 ( 0.90 ) 15.24 ( 0.60 ) 2.5( 0.10 ) 5.8 ( 0.23 ) 50.8 ( 2.00 ) 6 + 0.2/-0.1 45.72 ( 1.80 ) 5 1.0 Pin No. Output Triple 1 2 3 4 5 6 7 8 R.C No Pin -Vin +Vin +Vout +5V COMMON -Vout 100 LOAD (%) 30.48 (1.20) 80 -25 0 50.8 ( 2.00) NOTE 25 71 85 50 Ta ( 100 ) 1.All parameters are specified at normal input, rated load, 25 70% RH. Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:TKA30-SPEC 2006-03-28 PDF
Документация на серию TKA30 

\\Fileserver-s\doc-control\do

Дата модификации: 27.07.2006

Размер: 207.3 Кб

1 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.