10SVP120M

Конденсатор алюминиевый 10 В x 120 мкФ ±20%, SMD, -55...105 °C, 2000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 9

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ 10SVPC120M (PAN)
 
в ленте 1000 шт
A+ 16SVPC120M (PAN)
 
в ленте 1000 шт
A+ 20SVPF120M (PAN)
 
в ленте 1000 шт High Voltage / Large capacitance
A+ EEEFN1A121UR (PAN)
 
в ленте 1000 шт V-FN, 10V, 120uF, 105°C, 2000h, 5x5.8mm, ripple 160mArms, 0.7Ohm
A+ 10SVPC120MV (PAN)
 
1000 шт
A+ EEEFK1A121SR (PAN)
 
1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 120uF, Surface Mount, 2121
A+ 10SVQP120M (PAN)
 
1000 шт
A+ 16SVPG1200M (PAN)
 
в ленте 400 шт
 
Super Low ESR / High ripple current
A+ 20SVF120M (PAN)
 
1000 шт High Voltage, Temp and Capacitance

Файлы 3

показать свернуть
Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVP series Features ● Standard ● RoHS compliance, Halogen free Specifications A5 B6 C6 Rated voltage range (V) 4.0 to 16 4.0 to 20 2.5 to 20 Nominal cap.range (μF) 3.3 to 33 10 to 68 22 to 220 Category temp. range Capacitance tolerance E7 E12 –55 ℃ to +105 ℃ 4.0 to 20 2.5 to 20 33 to 330 100 to 680 DC leakage current ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Dissipation factor (tan δ) Please see the attached characteristics list Endurance F12 4.0 to 20 2.5 to 20 56 to 680 150 to 1500 +105 ℃ 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) DC leakage current Damp heat (Steady state) F8 ≦ 150 % of the initial limit Within the initial limit +60 ℃, 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) DC leakage current Marking ≦ 150 % of the initial limit Within the initial limit (after voltage processing) Dimensions (not to scale) 0.2 max. P H øD Polarity marking (−) Lot No. W ⊖ C Size code Series code* ⊕ L R. voltage (V) * Depends on the case size. R. capacitance (μF) Size code A5 B6 C6 E7 E12 F8 F12 R Unit:mm øD±0.5 +0.1 L -0.4 W±0.2 H±0.2 C±0.2 R P*1 4.0 5.0 6.3 8.0 8.0 10.0 10.0 5.4 5.9 5.9 6.9 11.9 7.9 12.6 4.3 5.3 6.6 8.3 8.3 10.3 10.3 4.3 5.3 6.6 8.3 8.3 10.3 10.3 5.0 6.0 7.3 9.0 9.0 11.0 11.0 0.6 to 0.8 1.0 1.4 2.1 3.2 3.2 4.6 4.6 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.6 to 0.8 0.8 to 1.1 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15 PDF
Документация на 10SVP10M 

Series catalog

Дата модификации: 08.12.2021

Размер: 467.2 Кб

7 стр.

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVP Features ● Standard ● Wealth ● RoHS models compliance, Halogen free Specifications Size code A5 B6 C6 E7 F8 E12 F12 Category temperature range –55 °C to +105 °C Rated voltage range 4 V.DC to 16 V.DC 4 V.DC to 20 V.DC 2.5 V.DC to 20 V.DC 4 V.DC to 20 V.DC 2.5 V.DC to 20 V.DC Rated capacitance range 3.3 µF to 33 µF 10 µF to 68 µF 22 µF to 220 µF 33 µF to 330 µF 56 µF to 680 µF 100 µF to 680 µF 150 µF to 1500 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W Polarity marking (−) Lot. No. Series R. Capacitance R. Voltage + L Size code fD±0.5 A5 B6 C6 E7 F8 E12 F12 4.0 5.0 6.3 8.0 10.0 8.0 10.0 C H fD P – L +0.1 −0.4 5.4 5.9 5.9 6.9 7.9 11.9 12.6 R W±0.2 H±0.2 C±0.2 4.3 5.3 6.6 8.3 10.3 8.3 10.3 4.3 5.3 6.6 8.3 10.3 8.3 10.3 5.0 6.0 7.3 9.0 11.0 9.0 11.0 Unit : mm R P±0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 1.0 1.4 2.1 3.2 4.6 3.2 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 PDF
Документация на серию SVP_OSCON 

CON_CAP_SVP_e.indd

Дата модификации: 27.03.2019

Размер: 199.9 Кб

3 стр.

Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.