20SVPK680M

Конденсатор алюминиевый 20 В x 680 мкФ ±20%, SMD, -55...105 °C, 1000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 10×10×10.3 мм
Примечание Miniaturised High Voltage, Temp and Capacitance, RoHs compliance, Halogen free
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 22

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ CDL035M681XDBPKKKV00R (SUSCON)
 
в ленте 250 шт
A+ EEEFK1V681AQ (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEVTG1V681M (PAN)
 
в ленте 125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 7575
A+ EEVTG1E681M (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 6767
A+ EEVTG1E681UQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEEFK1E681SP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEVTG1V681UM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 6767
A+ EEEFN1E681UP (PAN)
 
500 шт V-FN, 25V, 680uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEEFN1E681UV (PAN)
 
в ленте 500 шт V-FN, Vibration proof, 25V, 680uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEH-ZS1E681UP (PAN)
 
 
A+ EEEFT1V681UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEEFT1V681UV (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEETK1E681AM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 6767
A+ EEH-ZS1V681UP (PAN)
 
 
A+ EEH-ZS1V681UV (PAN)
 
 
A+ EEETK1V681AM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 7575
A+ EEEFK1V681AV (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEETKE681UAQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEETKV681UAM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 6767
A+ EEVFK1V681Q (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEVFK1V681V (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEEHD1V681AQ (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353

Файлы 3

показать свернуть
Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPK series Features ● High voltage (50 V max.) ● 125 ℃ 1000 h ● RoHS compliance, Halogen free Specifications Size code B6 C6 E7 Category temp. range Rated voltage range 10 μF to 100 μF 22 μF to 220 μF Capacitance tolerance Dissipation factor (tan δ) 68 μF to 680 μF 120 μF to 1200 μF Please see the attached characteristics list +125 ℃ 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) DC leakage current Damp heat (Steady state) 33 μF to 330 μF ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list DC leakage current Endurance F12 ≦ 200 % of the initial limit Within the initial limit +60 ℃, 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) DC leakage current Marking ≦ 150 % of the initial limit Within the initial limit (after voltage processing) Dimensions (not to scale) 0.2 max. Polarity marking (−) ⊕ L R. voltage (V) * Depends on the case size. R. capacitance (μF) Size code B6 C6 E7 E12 F12 P H øD Lot No. Series code* W ⊖ C Nominal cap.range E12 –55 ℃ to +125 ℃ 16 V to 50 V R Unit:mm øD±0.5 +0.1 L -0.4 W±0.2 H±0.2 C±0.2 R P*1 5.0 6.3 8.0 8.0 10.0 5.9 5.9 6.9 11.9 12.6 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 0.6 to 0.8 1.4 2.1 3.2 3.2 4.6 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-18 PDF
Документация на 16SVPK1200M 

Series catalog

Дата модификации: 07.12.2021

Размер: 444.1 Кб

7 стр.

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: SVPK UP GRADE Features ● High voltage (50 V.DC max.) ● 125 ℃ 1000 h ● RoHS compliance, Halogen free Specifications E7 E12 F12 Category temp. range –55 ℃ to +125 ℃ Rated voltage range 16 V.DC to 50 V.DC Nominal cap.range 10 μF to 100 μF 22 μF to 220 μF 33 μF to 330 μF 68 μF to 680 μF 120μF to 1200μF Capacitance tolerance ±20 % (120 Hz / +20 ℃) DC leakage current Please see the attached characteristics list Dissipation factor (tan δ) Please see the attached characteristics list +125 ℃, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) ≦ 200 % of the initial limit DC leakage current Within the initial limit Endurance +60 ℃, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) ≦ 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Size code B6 Marking C6 Dimensions (not to scale) 0.2 max Polarity marking (−) W ⊖ R. Voltage (V.DC) R. Capacitance (μF) Size φD±0.5 code B6 5.0 C6 6.3 E7 8.0 E12 8.0 F12 10.0 L P ⊕ L +0.1 -0.4 5.9 5.9 6.9 11.9 12.6 C H Series φD Lot No. R Unit:mm W±0.2 H±0.2 C±0.2 R P±0.2 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 0.6~0.8 0.6~0.8 0.6~0.8 0.8~1.1 0.8~1.1 1.4 2.1 3.2 3.2 4.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-18 PDF
Документация на серию SVPK_OSCON 

Series catalog

Дата модификации: 27.03.2019

Размер: 381.3 Кб

3 стр.

Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.