ECHU1H124GC9

Panasonic Industrial Europe GmbH
Конденсатор плёночный 50 В, 0.12 мкФ ±2%, POLYPHENYLENE SULPHIDE
развернуть ▼ свернуть ▲
Внешний вид серии ECHU(C)

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение постоянное номинальное
Тип диэлектрика
Способ монтажа
Температура рабочая
  Примечание: Film Capacitor, Polyphenylene Sulphide, 50V, 2% +Tol, 2% -Tol, 0.12uF, Surface Mount
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 8

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение VDC Напряжение VAC Тип диэлектрика Способ монтажа Шаг Корпус производителя ESR Ток пульсаций Классификация Применение Температура рабочая Примечание Карточка
товара
A- ECHU1124GC9 (PAN)
 
— в ленте 1500 шт
 
 — — — — — — Film Capacitor, Polyphenylene Sulfide, 100V, 2% +Tol, 2% -Tol, 0.12uF, Surface Mount, 2820
A- ECHU1124JC9 (PAN)
 
— 1500 шт
 
 — — — — — — Film Capacitor, Polyphenylene Sulfide, 100V, 5% +Tol, 5% -Tol, 0.12uF, Surface Mount, 2820
A- ECHU1H124GX9 (PAN)
 
— 3000 шт — — — — — Film Capacitor, Polyphenylene Sulfide, 50V, 2% +Tol, 2% -Tol, 0.12uF, Surface Mount, 2416
A- ECHU1H124JX9 (PAN)
 
— 3000 шт — — — — — Film Capacitor, Polyphenylene Sulfide, 50V, 5% +Tol, 5% -Tol, 0.12uF, Surface Mount, 2416
A- ECQE1124KF (PAN)
 
—
 
 — — — — — — — Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 0.12uF, Through Hole Mount
A- ECW-U1H124JC9 (PAN)
 
—
 
 — Polyester, Polyethylene Naphthalate (PEN), Metallized - Stacked — — — — — —
A- ECWU1124JC9 (PAN)
 
— 2000 шт — — — — — Film Capacitor, Polyethylene Naphthalate, 100V, 5% +Tol, 5% -Tol, 0.12uF, Surface Mount, 2416
A- ECWU1124KC9 (PAN)
 
— 2000 шт — — — — — Film Capacitor, Polyethylene Naphthalate, 100V, 10% +Tol, 10% -Tol, 0.12uF, Surface Mount, 2416

Файлы 2

показать свернуть
Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Series : ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction Features ● Small in size loss and excellent frequency characteristics ● For reflow soldering ● RoHS directive compliant ● Low Recommended applications ● Time-constant ● Filtering ● Oscillation and resonance circuit for LCD backlight inverter unit ● Resonance Explanation of part number 1 2 3 4 5 E C H U 1 Product code Dielectric & construction 6 8 9 10 11 C Rated voltage 1 7 Capacitance 100 V.DC Cap. Tol. G ±2 % J ±5 % Suffix Suffix Code Tape width 9 12 mm V 16 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range – 55 °C to +105 °C 100 V.DC 0.010 µF to 0.22 µF (E12) Capacitance tolerance ±2 %(G), ±5 %(J) Dissipation factor (tan d) tan d < 0.6 % (20 °C, 1 kHz) Withstand voltage Between terminals : Rated volt. (V.DC)×150 %, 60 s Insulation resistance (IR) IR > 3000 MΩ (20 °C, 100 V.DC, 60 s) Reflow soldering : 260 °C max. and 95 sec max. at more than 220 °C (Temp. at capacitor surface) Soldering conditions ✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016 PDF
Документация на серию ECHU(C) 

Series catalog

Дата модификации: 17.01.2019

Размер: 110.4 Кб

2 стр.

Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction ■Features • Small in size • Low loss and excellent frequency characteristics • RoHS directive compliant ■Recommended Applications • Time-constant • Filtering • Oscillation and resonance • Resonance circuit for LCD backlight inverter unit ■Explanation of Numbers 1 2 3 4 E C H U Product code Dielectric & construction 5 6 7 8 9 10 11 12 C Rated voltage Capacitance 1H 50 VDC 1 100 VDC Cap. Tol. Suffix G ±2 % J ±5 % Suffix 9 V Tape width 12 mm 16 mm ■Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) 50 VDC : -55 ˚C to +125 ˚C 100 VDC : -55 ˚C to +105 ˚C 50 VDC, 100 VDC (50 VDC : 0.12 µF or more : Derating of rated voltage by 1.25 %/ ˚C at more than 105 ˚C) 0.047 µF to 0.22 µF(E12) 50 VDC 100 VDC 0.010 µF to 0.22 µF(E12) ±2 %(G), ±5 %(J) 50 VDC : Between terminals : Rated volt. (VDC)✕175 % 1 s to 5 s 100 VDC : Between terminals : Rated volt. (VDC)✕160 % 60 s tan < =0.6 % (20 ˚C, 1 kHz) >3000 MΩ (20 ˚C, 50 VDC, 60 s) 50 VDC : IR= >3000 MΩ (20 ˚C, 100 VDC, 60 s) 100 VDC : IR= 50 VDC Flow soldering : 260 ˚C max., 5 s max. Reflow soldering : 260 ˚C max. and 30 s max. at more than 230 ˚C (Temp. at cap. Surface) 100 VDC Reflow soldering : 260 ˚C max. and 30 s max. at more than 230 ˚C (Temp. at cap. Surface) Soldering conditions ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Mar. 2006 PDF
Документация на ECHU1H104GC9 

Дата модификации: 08.03.2006

Размер: 94.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    JFB02A105K150000B (JB)