ECWU1H154JC9

Panasonic Industrial Europe GmbH
Конденсатор плёночный 50 В, 0.15 мкФ ±5%, POLYETHYLENE NAPHTHALATE
развернуть ▼ свернуть ▲
Внешний вид серии ECWU(C)

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение постоянное номинальное
Тип диэлектрика
Способ монтажа
Температура рабочая
Размер 6×4.1×2 мм
  Примечание: Film Capacitor, Polyethylene Naphthalate, 50V, 5% +Tol, 5% -Tol, 0.15uF, Surface Mount, 2416
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 7

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение VDC Напряжение VAC Тип диэлектрика Способ монтажа Шаг Корпус производителя ESR Ток пульсаций Классификация Применение Температура рабочая Примечание Карточка
товара
A- ECH-U1H154JX9 (PAN)
 
— 1 шт
 
 — — — — — — — —
A- ECWU1154KC9 (PAN)
 
— 2000 шт — — — — — Film Capacitor, Polyethylene Naphthalate, 100V, 10% +Tol, 10% -Tol, 0.15uF, Surface Mount, 2416
A- ECWU1154JC9 (PAN)
 
— 2000 шт — — — — — Film Capacitor, Polyethylene Naphthalate, 100V, 5% +Tol, 5% -Tol, 0.15uF, Surface Mount, 2416
A- ECHU1H154JX9 (PAN)
 
— 3000 шт — — — — — Film Capacitor, Polyphenylene Sulfide, 50V, 5% +Tol, 5% -Tol, 0.15uF, Surface Mount, 2416
A- ECHU1H154GX9 (PAN)
 
— 3000 шт — — — — — Film Capacitor, Polyphenylene Sulfide, 50V, 2% +Tol, 2% -Tol, 0.15uF, Surface Mount, 2416
A- ECHU1154JCV (PAN)
 
— 1000 шт — — — — — — Film Capacitor, Polyphenylene Sulfide, 100V, 5% +Tol, 5% -Tol, 0.15uF, Surface Mount, 2825
A- ECHU1154GCV (PAN)
 
— в ленте 1000 шт — — — — — — Film Capacitor, Polyphenylene Sulfide, 100V, 2% +Tol, 2% -Tol, 0.15uF, Surface Mount, 2825

Файлы 2

показать свернуть
Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Series : ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction Features ● Small in size ● For reflow soldering ● RoHS directive compliant Recommended applications ● General purpose (Coupling, By-pass) Explanation of part number 1 2 3 4 E C W U Product code Dielectric & construction 5 6 7 8 9 10 11 C Rated voltage Capacitance Cap. Tol. Suffix 1 100 V.DC J 2 250 V.DC K ±10 % ±5 % 2 3 4 5 6 7 8 9 10 11 E C W U 1 1 0 4 V 3 3 Dielectric & construction Rated voltage 1 Capacitance 100 V.DC 2 3 4 5 6 7 E C W U C 2 J Dielectric & construction Suffix 9 12 mm V 16 mm Suffix Small in size, Cap. Tol. : ±5 %, Tape width : 12 mm 1 Product code Suffix Code Tape width 1 Product code 12 Rated voltage 8 9 10 Capacitance 2J 630 V.DC 11 12 J V Cap. Tol. Suffix J Code Tape width ±5 % V 16 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan d) Withstand voltage Insulation resistance (IR) Soldering conditions – 55 °C to +125 °C 100 V.DC, 250 V.DC, 630 V.DC (Derating of rated voltage by 1.25 %/°C more than 85 °C) 100 V.DC 0.012 μF to 1.0 μF (E12) 250 V.DC 0.0010 μF to 0.12 μF (E12) 630 V.DC 0.022 μF, 0.027 μF, 0.033 μF 100 V.DC ±5 %(J), ±10 %(K) (C > 0.18 μF : ±10 %(K) Only) 250 V.DC ±5 %(J), ±10 %(K) 630 V.DC ±5 %(J) tan d < 1.0 % (20 °C, 1 kHz) Between terminals : Rated volt. (V.DC)×150 %, 60 s C < 0.33 μF 100 V.DC, 250 V.DC, 630 V.DC : IR > 3000 MΩ (20 °C, 100 V.DC, 60 s) C > 0.33 μF 100 V.DC : IR > 1000 MΩ∙μF (20 °C, 100 V.DC, 60 s) 100 V.DC Reflow soldering : 250 °C max. and 60 s max. at more than 220 °C 250 V.DC (Temp. at capacitor surface) 630 V.DC Reflow soldering : 250 °C max. and 60 s to 150 s. at more than 217 °C (Temp. at cap. surface) ✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ✽ Please consult us for capacitance range between 0.15 μF and 1.0 μF. (250 V.DC) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016 PDF
Документация на серию ECWU(C) 

Series catalog

Дата модификации: 17.01.2019

Размер: 108.3 Кб

3 стр.

Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction ■Features • Small in size • For reflow soldering • RoHS directive compliant ■Recommended Applications • General purpose (Coupling, By-pass) ■Explanation of Part Numbers 1 2 3 4 E C W U Product code Dielectric & construction 5 6 7 8 9 10 11 12 C Rated voltage Nominal capacitance Cap. Tol. Suffix J ±5 % K ±10 % 1C 16 VDC 1H 50 VDC 1 100 VDC 2 250 VDC Suffix 9 V Tape width 12 mm 16 mm ■Specifications Category temp.range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance 16 VDC, 50 VDC : -55 ˚C to +105 ˚C 100 VDC, 250 VDC : -55 ˚C to +125 ˚C 16 VDC, 50 VDC, 100 VDC, 250 VDC (100 VDC, 250 VDC : Derating of rated voltage by 1.25 %/˚C more than 85 ˚C) 16 VDC 0.12 µF to 0.47 µF (E12) 50 VDC 0.056 µF to 0.22 µF (E12) 100 VDC 0.012 µF to 1.0 µF (E12) 250 VDC 16 VDC, 50 VDC 0.0010 µF to 0.12 µF (E12) ±5 %(J) 100 VDC >0.18 µF : ±10 %(K)only) ±5 %(J), ±10 %(K) (C= Withstand voltage ±5 %(J), ±10 %(K) 250 VDC Between terminals: Rated volt. (VDC)✕150 % 60 s Dissipation factor (tan ) tan < =1.0 %(20 ˚C, 1 kHz) C< =0.33 µF >3000 MΩ · (20 ˚C,10 VDC, 60 s) 16 VDC : IR= >3000 MΩ · (20 ˚C,50 VDC, 60 s) 50 VDC : IR= >3000 MΩ · (20 ˚C,100 VDC, 60 s) 100 VDC, 250 VDC : IR= C>0.33 µF >1000 MΩ · µF (20 ˚C,10 VDC, 60 s) 16 VDC : IR= >1000 MΩ · µF (20 ˚C,100 VDC, 60 s) 100 VDC : IR= Insulation resistance (IR) Soldering conditions Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface) (Please consult us for Reflow 250 ˚C max. product.) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ❈ Please consult us for capacitance range between 0.15 µF and 1.0 µF for 250 VDC type. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. PDF
Документация на ECWU1C124JC9 

Дата модификации: 29.08.2008

Размер: 95.1 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    JFB02A105K150000B (JB)