EEE1EA101UAP

Конденсатор алюминиевый 25 В x 100 мкФ ±20%, SMD, -40...85 °C, 1000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Номинальная ёмкость
Допуск ёмкости
Номинальное напряжение
Диаметр корпуса
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа
  Примечания: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
Диаметр x Высота 8×8×8.3 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 16

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Диаметр Высота Траб Наработка Монтаж Примечания Выводы Карточка
товара
P- EEE1EA101UP (PAN) в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ CA025M0100REE-0806 (YAG)
ECAPSMD 100/25V 0806 CA (YAG)
в ленте 1000 шт конденсатор алюминиевый SMD 100 мкФ 25 В  -40...85 °C 2000 ч Surface Mount Aluminum electrolytic
A+ CA035M0100REF-0810 (YAG)
ECAPSMD 100/35V 0810 CA (YAG)
в ленте 500 шт конденсатор алюминиевый SMD 100 мкФ 35 В  -40...85 °C 2000 ч Surface Mount Aluminum electrolytic
A+ CA050M0100REF-0810 (YAG)
ECAPSMD 100/50V 0810 CA (YAG)
в ленте 500 шт конденсатор алюминиевый SMD 100 мкФ 50 В  -40...85 °C 2000 ч Surface Mount Aluminum electrolytic
A+ CA050M0100REG-1010 (YAG) в ленте 500 шт конденсатор алюминиевый SMD 100 мкФ 50 В  -40...85 °C 2000 ч Surface Mount Aluminum electrolytic
A+ CB050M0100RSG-1010 (YAG) в ленте 500 шт конденсатор алюминиевый SMD 100 мкФ 50 В  -40...105 °C 1000 ч Surface Mount Aluminum electrolytic
A+ JCK1E101M063077 (JB) в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ JCK1H101M080105 (JB) 500 шт
A+ JCK1H101M100105 (JB) в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 4141
A+ JCK1V101M063077 (JB) в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEETP1V101AP (PAN) 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEEFH1E101XL (PAN) в ленте 900 шт
 
V-FH / 25V / 100uF / 105°C / 7000h / 6.3x7.7mm / ripple 300mArms / ESR 0.45Ohm
A+ EEEFN1E101UP (PAN) 1000 шт V-FN, 25V, 100uF, 105°C, 2000h, 6.3x5.8mm, ripple 240mArms, 0.36Ohm
A+ EEEFP1E101AP (PAN) 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEEFP1V101AP (PAN) 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ CB050M0100RSF-0810 (YAG)
ECAPSMD 100/50V 0810 105C CB (YAG)
в ленте 500 шт конденсатор алюминиевый SMD 100 мкФ 50 В  -40...105 °C 1000 ч Surface Mount Aluminum electrolytic

Сопутствующие товары 15

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
T55D107M025C0060 (VISHAY) в ленте 500 шт
 
597D107X0035F2T (VISHAY) 250 шт
 
 
TAJE107M025RNJ (AVX) TANT73434373X43X43MM в ленте 400 шт Конденсатор танталовый TANT73434373X43X43MM  
TPSV107K025R0100 (AVX) TANT73613873X61X38MM в ленте 400 шт Конденсатор танталовый 25 В 100 мкФ ±10% типоразмер SMD_7361-38 TANT73613873X61X38MM  
T491X107K025AT (KEM) в ленте 500 шт Конденсатор танталовый  
T495X107K025ATE150 (KEM) TANT73434373X43X43MM 1 шт TANT73434373X43X43MM
25TQC100MD3 (PAN) 2500 шт
 
TAJV107K025RNJ (AVX) TANT73613873X61X38MM 1 шт CAPACITOR TANT, 100UF, 25V, 2924 TANT73613873X61X38MM  
TAJV107M025RNJ (AVX) TANT73613873X61X38MM в ленте 400 шт CAPACITOR TANT 100UF, 25V, 0.4OHM, 2924 TANT73613873X61X38MM  
TCJD107M025R0055E (AVX)
TCJD107M025R0070E (AVX)
TCJE107M025R0080E (AVX)
TCJU107M025R0070E (AVX) TANT73614373X61X43MM 11 шт TANT73614373X61X43MM
TCN4107M025R0100 (AVX)
 
TCN4107M025R0100E (AVX)
 

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type S series High temperature Lead-Free reflow (suffix : A✽) Features ● ● ● ● Endurance : 85 ℃ 2000 h Vibration-proof product (30G guaranteed) is available upon request. (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –40 ℃ to +85 ℃ 6.3 V to 50 V 1 μF to 1500 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 (Impedance ratio at 120 Hz) Z (-25 ℃) / Z (+20 ℃) 4 3 2 2 2 2 Z (-40 ℃) / Z (+20 ℃) 8 6 4 4 3 3 After applying rated working voltage for 2000 h (Bi-polar:1000 h for each polarity) at +85 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Within ±20 % of the initial value Size code Capacitance change Capacitance change D8 (ø6.3) 2000 hours ±25 % ≦ D (ø6.3) Miniature 1000 hours ±30 % Dissipation factor (tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 h at +85 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor (tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency(Hz) Correction factor 50, 60 0.70 1k 1.30 Dimensions 0.3 max. products (Black dot) Rated voltage(V) (6=6.3 V) (P) W L (S) or(A) Mark for Lead-Free B±0.2 H Series indentification (I) Capacitance (μF) øD±0.5 Negative polarity marking (–) Lot number A±0.2 K Example : 6.3 V 22 μF Marking color : BLACK 22 6S 10 k to 1.70 (I) Marking 120 1.00 Pressure Relief(ø10and larger) ( )Reference size Unit:mm Size code øD L B 4.0 5.4 +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 A、B H I W P 4.3 5.5 max. 1.8 0.65±0.1 K 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 1.0 0.35 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 C 5.0 5.4 D 6.3 5.4 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 G ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEE0JA101WAR 

Series catalog

Дата модификации: 24.09.2021

Размер: 651.5 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : S Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 85 °C 2000 h product is available upon request. (08 mm and larger) ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +85 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Miniaturization product type 1000 hours) at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meer the following limits. Within ±20 % of the initial value Size code Cap. change Capacitance change D8 (06.3×7.7) 2000 hours ±25 % 1000 hours ±30 % < D (06.3) Miniature < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 6S Lot number Series indentification (S) or (A) Mark for Lead-Free products (Black dot) Rated voltage (V.DC) (6=6.3 V.DC) A±0.2 (P) H 0D±0.5 Negative polarity marking (–) – + L W Pressure Relief (010 and larger) Size code 0D B 4.0 C 5.0 D 6.3 D8 6.3 E 8.0 F 8.0 G 10.0 L A, B (I) 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK K (I) Dimensions B±0.2 Marking ( ) Reference size (Unit : mm) H. 4.3 5.5 max 5.4 +0.1 -0.2 5.4 +0.1 5.3 6.5 max -0.2 5.4 +0.1 6.6 7.8 max -0.2 7.7±0.3 6.6 7.8 max 6.2±0.3 8.3 9.5 max 10.2±0.3 8.3 10.0 max 10.2±0.3 10.3 12.0 max I W P K 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 PDF
Документация на серию S(A)_SMD 

N_AEC_V-SA_E.indd

Дата модификации: 27.03.2019

Размер: 87.4 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.