EEEFK1H101L

Aluminum Electrolytic Capacitors/ FK Surface Mount Type Series: FK Type: V ■ Features ● Endurance: 2000 h to 5000 h at 105 °C ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● AEC-Q200 qualified ✽ ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W...
развернуть ▼ свернуть ▲
  • Корпус:

Файлы 1

показать свернуть
Aluminum Electrolytic Capacitors/ FK Surface Mount Type Series: FK Type: V ■ Features ● Endurance: 2000 h to 5000 h at 105 °C ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● AEC-Q200 qualified ✽ ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat –55 °C to +105 °C 6.3 V.DC to 100 V.DC 3.3 μF to 6800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached standard products list W.V. (V) 6.3 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > 012.5 and suffix “G” in 08×10.2, 010×10.2 are 5000 hours) Capacitance change ±30 % of initial measured value (Suffix “G” is 35 %) tan d < 200 % of initial specified value (Suffix “G” is 300 %) DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current 50, 60 0.70 Correction factor Rated Voltage Mark j 6.3 V A 10 V C 16 V E 25 V V 35 V L Pressure Relief (010 and larger) Rated Voltage Mark Capacitance (μF)  K ', Series identification Rated Voltage Mark H J K 2A 50 V 63 V 80 V 100 V (P) (I) A±0.2 K (Unit : mm) B±0.2 Series identification Mark for Lead-Free Products Black Dot (Square) – H 0D±0.5 Capacitance (μF) > 012.5 Lot number 0.3 max.  K ', Lot number Negative polarity marking (–) 100 k to 1.00 ■ Dimensions in mm (not to scale) Example:6.3 V 22 μF, 6.3 V 3300 μF Marking color : BLACK < 010 Negative polarity marking (–) 10 k 0.95 + (I) ■ Marking Frequency (Hz) 1k 0.90 120 0.75 W ( ) Reference size Size code B D L A,B I W P K 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 +- 1.5 0.2 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +- 1.5 0.2 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 +- 1.5 0.2 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 H G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-41 – PDF
Документация на EEEFK1V221P 

AEC_V-FK_E.indd

Дата модификации: 24.03.2014

Размер: 113 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.