EEEFKV121XSV

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 35 В x 120 мкФ ±20%, SMD, -55...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид EEEFP1V221AL

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×6.6 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 120uF, Surface Mount, 2626
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 18

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEEFN1J121UP (PAN)
 
— 500 шт — — — — V-FN, 63V, 120uF, 105°C, 2000h, 10x10.2mm, ripple 400mArms, 0.35Ohm
A+ EEEFKV121XSP (PAN)
 
— 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 120uF, Surface Mount, 2626
A+ 35SVF120M (PAN)
 
— 400 шт — — — — High Voltage, Temp and Capacitance
A+ EEH-ZC1H121P (PAN)
 
—
 
 — — — —
A+ EEH-ZC1H121V (PAN)
 
—
 
 — — — —
A+ 35SVT120M (PAN)
 
— 400 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 35V, 20% +Tol, 20% -Tol, 120uF, Surface Mount, 4141
A+ 50SVPK120M (PAN)
 
— в ленте 400 шт — — — — Miniaturised High Voltage, Temp and Capacitance
A+ EEHZU1J121UV (PAN)
 
—
 
 — — — —
A+ EEHZV1H121P (PAN)
 
—
 
 — — — —
A+ EEHZV1H121V (PAN)
 
—
 
 — — — —
A+ 35SVPF120M (PAN)
 
— в ленте 400 шт — — — — High Voltage / Large capacitance
A+ EEH-ZS1J121UV (PAN)
 
—
 
 — — — —
A+ EEHZC1H121P (PAN)
 
— в ленте 500 шт — — — —
A+ EEHZC1H121V (PAN)
 
— 500 шт — — — —
A+ EEH-ZT1H121P (PAN)
 
—
 
 — — — —
A+ EEH-ZU1J121UP (PAN)
 
—
 
 — — — —
A+ EEH-ZV1H121P (PAN)
 
—
 
 — — — —
A+ EEEFNV121XUP (PAN)
 
— в ленте 900 шт — — — — V-FN, 35V, 120uF, 105°C, 2000h, 6.3x7.7mm, ripple 280mArms, 0.34Ohm

Файлы 1

показать свернуть
Aluminum Electrolytic Capacitors/ FK Surface Mount Type Series: FK Type: V ■ Features ● Endurance: 2000 h to 5000 h at 105 °C ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● AEC-Q200 qualified ✽ ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat –55 °C to +105 °C 6.3 V.DC to 100 V.DC 3.3 μF to 6800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached standard products list W.V. (V) 6.3 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > 012.5 and suffix “G” in 08×10.2, 010×10.2 are 5000 hours) Capacitance change ±30 % of initial measured value (Suffix “G” is 35 %) tan d < 200 % of initial specified value (Suffix “G” is 300 %) DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current 50, 60 0.70 Correction factor Rated Voltage Mark j 6.3 V A 10 V C 16 V E 25 V V 35 V L Pressure Relief (010 and larger) Rated Voltage Mark Capacitance (μF)  K ', Series identification Rated Voltage Mark H J K 2A 50 V 63 V 80 V 100 V (P) (I) A±0.2 K (Unit : mm) B±0.2 Series identification Mark for Lead-Free Products Black Dot (Square) – H 0D±0.5 Capacitance (μF) > 012.5 Lot number 0.3 max.  K ', Lot number Negative polarity marking (–) 100 k to 1.00 ■ Dimensions in mm (not to scale) Example:6.3 V 22 μF, 6.3 V 3300 μF Marking color : BLACK < 010 Negative polarity marking (–) 10 k 0.95 + (I) ■ Marking Frequency (Hz) 1k 0.90 120 0.75 W ( ) Reference size Size code B D L A,B I W P K 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 +- 1.5 0.2 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +- 1.5 0.2 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 +- 1.5 0.2 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 H G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-41 – PDF
Документация на EEEFK1V221P 

AEC_V-FK_E.indd

Дата модификации: 24.03.2014

Размер: 113 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)