EEEFT1H470AP

Конденсатор алюминиевый 50 В x 47 мкФ ±20%, SMD, -55...105 °C, 2000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Номинальная ёмкость
Допуск ёмкости
Номинальное напряжение
Диаметр корпуса
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа
  Примечания: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
Диаметр x Высота 6.3×6.3×6.6 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 17

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Диаметр Высота Траб Наработка Монтаж Примечания Выводы Карточка
товара
A+ JCK1H470M063077 (JB) в ленте 1000 шт
A+ EEEFN1K470UP (PAN) в ленте 500 шт V-FN, 80V, 47uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm
A+ EEVFK2A470Q (PAN) в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 5353
A+ CA050M0047REF-0810 (YAG) в ленте 500 шт конденсатор алюминиевый SMD 47 мкФ 50 В  -40...85 °C 2000 ч Surface Mount Aluminum electrolytic
A+ CA050M0047REH-0607 (YAG)
ECAPSMD 47/50V 0607 CA (YAG)
в ленте 1000 шт конденсатор алюминиевый SMD 47 мкФ 50 В  -40...85 °C 2000 ч Surface Mount Aluminum electrolytic
A+ EEE1HA470XAP (PAN) 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
A+ EEEFC1H470P (PAN) в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3939
A+ EEEFN1H470XV (PAN) 900 шт V-FN, Vibration proof, 50V, 47uF, 105°C, 2000h, 6.3x7.7mm, ripple 195mArms, 0.68Ohm
A+ EEETG1H470UP (PAN) 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333
A+ 80SXV47M (PAN) 400 шт Super High Voltage / 1000h at 125°C
A+ EEETK1K470AQ (PAN) 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 5353
A+ EEHZC1J470V (PAN) 500 шт Low ESR and high ripple current (85 % over, Lower ESR than current V-TP)
A+ EEHZC1K470P (PAN) в ленте 500 шт
A+ EEHZC1K470V (PAN) 500 шт
A+ EEVTG2A470Q (PAN) 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 5353
A+ EEEHD1H470P (PAN) 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141
A+ EEEFK1H470P (PAN) в ленте 1000 шт конденсатор алюминиевый Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333

Сопутствующие товары 10

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
597D476X9050Z2T (VISHAY) в ленте 250 шт
 
 
THH9476M063W0250U (AVX)
 
TWCB476K050SCYZ0000 (AVX)
 
TWCB476K050CCYZ0000 (AVX)
 
TWAA476K060CBSZ0000 (AVX)
 
THH9476M063W0250J (AVX)
 
T140D476K050AS (KEM)
T140D476K050AT (KEM) Конденсатор танталовый  
T140D476M050AS (KEM) 1 шт Конденсатор танталовый  
T543O476M050ATE060 (KEM)
 

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type FT series High temperature Lead-Free reflow Features ● ● ● ● Endurance:105 ℃ 2000 h to 5000 h Miniaturized, Low ESR (1 size smaller than series FK) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 50 V 10 μF to 2200 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV(μA)After 2 minutes Please see the attached characteristics list After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. (Suffix “G” in 6.3 V : 3000 hours, 10 V to 50 V : 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %) Dissipation factor(tan δ) ≦ 200 % of the initial limit (Suffix “G” is ≦ 300 %) Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor(tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Freq.(Hz) Cap.(μF) 10 to 470 560 to 2200 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 Dimensions K Lot number R.voltage code 6.3 10 16 (P) L Unit:V E V H 25 35 50 (I) Series identification W Pressure Relief (ø10 and larger) Rated voltage code j A C B±0.2 Capacitance (μF) H øD±0.5 Negative polarity marking (–) 22 E FT A±0.2 0.3 max. Example:25 V 22 μF Marking color : BLACK (I) Marking ()Reference size Unit:mm Size code øD L A、B H I W P B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 K 1.5 0.35 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 F G ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEFT1E101AP 

Series catalog

Дата модификации: 24.09.2021

Размер: 638.1 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FT Type : V High temperature Lead-Free reflow Features ● Endurance : 105 °C 2000 h to 5000 h Low ESR (1 size smaller than series FK) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant ● Miniaturized, Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 2200 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes Please see the attached characteristics list After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. (Suffix “G” in 6.3 V.DC : 3000 hours, 10 V.DC to 50 V.DC : 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %) tan d < 200 % of the initial limit (Suffix “G” is < 300 %) DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Capacitance (μF) 10 to 560 to 470 2200 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 22 E FT Capacitance (μF) L Series identification K A±0.2 (P) + W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j H 0D±0.5 Negative polarity marking (–) – (I) 0.3 max. Example : 25 V.DC 22 μF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size H L A, B 0D code B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Apr. 2017 PDF
Документация на серию FT_SMD 

N_AEC_V-FTA_E.indd

Дата модификации: 27.03.2019

Размер: 89.7 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.