EEETK1H331AV

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 50 В x 330 мкФ ±20%, SMD, -40...125 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии TK(A)_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 15 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ CDL050M331XDBPKKKV00R (SUSCON)
 
— в ленте 1500 шт — — — — — —
A+ EEEFK2A331AM (PAN)
 
— в ленте 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 7575
A+ EEEFT1H331AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEVFK2A331M (PAN)
 
— в ленте 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 7575
A+ EEVTG1H331Q (PAN)
 
— 200 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEVTG1J331M (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEETK1H331AQ (PAN)
 
— 100 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEVTG1K331UM (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEETK1J331AM (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEETK1K331AM (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 7575
A+ EEEFK2A331AV (PAN)
 
— 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 7575
A+ EEETK2A331AM (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 7575
A+ EEETKK331UAM (PAN)
 
— в ленте 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEEFK1H331AQ (PAN)
 
— 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEEFK1H331AV (PAN)
 
— 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEEFK1K331AM (PAN)
 
— 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEEFK1K331AV (PAN)
 
— 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEVFK1H331Q (PAN)
 
— в ленте 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEVFK1H331V (PAN)
 
— в ленте 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEVFK1K331M (PAN)
 
— в ленте 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEVFK1K331V (PAN)
 
— 125 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 6767
A+ EEEFT1H331AL (PAN)
 
—
 
 — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFT1H331AV (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFT1H331GP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size TK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 125 °C 2000 h product is available upon request. ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 100 V.DC 47 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3 After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (Miniaturization product : Within ±35 %) < 300 % of the initial limit (Miniaturization product : Within 350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.75 Marking 1k 0.90 10 k 0.95 100 k to 1.00 Dimensions L Pressure Relief + (P) (I) Series identification Mark for Lead-Free products (Black dot) A±0.2 B±0.2 Capacitance (µF) 1000 A TK H 0D±0.5 Negative polarity marking (–) – K 0.3 max. (I) Example : 10 V.DC 1000 µF Marking color : BLACK W ( ) Reference size Rated voltage code (Unit : mm) Lot number R. Voltage 10 (V.DC) Code A 16 25 35 50 63 C E V H J 80 100 K 2A Size L A, B H I 0D code H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 W P K 0.90±0.3 1.20±0.3 1.20±0.3 4.4 6.7 6.7 0.70±0.3 0.70±0.3 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 PDF
Документация на серию TK(A)_SMD 

N_AEC_V-TK中形_E.indd

Дата модификации: 27.03.2019

Размер: 77.9 Кб

3 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size TK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 125 °C 2000 h product is available upon request. ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 100 V.DC 47 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3 After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (Miniaturization product : Within ±35 %) < 300 % of the initial limit (Miniaturization product : Within 350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.75 Marking 1k 0.90 10 k 0.95 100 k to 1.00 Dimensions L Pressure Relief + (P) (I) Series identification Mark for Lead-Free products (Black dot) A±0.2 B±0.2 Capacitance (µF) 1000 A TK H 0D±0.5 Negative polarity marking (–) – K 0.3 max. (I) Example : 10 V.DC 1000 µF Marking color : BLACK W ( ) Reference size Rated voltage code (Unit : mm) Lot number R. Voltage 10 (V.DC) Code A 16 25 35 50 63 C E V H J 80 100 K 2A Size L A, B H I 0D code H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 W P K 0.90±0.3 1.20±0.3 1.20±0.3 4.4 6.7 6.7 0.70±0.3 0.70±0.3 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 PDF
Документация на EEETK1A222AV 

N_AEC_V-TK中形_E.indd

Дата модификации: 07.04.2016

Размер: 53.4 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)