EEHAZF1V151

Конденсатор алюминиевый 35 В x 150 мкФ ±20%, SMD, -55...150 °C, 1000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 10×10×9.5 мм
Примечание High temprature than ZC series, Radial type
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEHAZF1V151B (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 35V, 20% +Tol, 20% -Tol, 150uF, Through Hole Mount
A+ EEHZT1V151V (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFK1V151GP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFP1V151AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFTV151XAP (PAN)
 
в ленте 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2626
A+ EEHZA1V151P (PAN)
 
в ленте 500 шт
A+ EEHZS1J151P (PAN)
 
250 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEHZS1J151V (PAN)
 
250 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEEFK1H151GP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEEFK1H151GV (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEEFK1H151V (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEHZT1V151P (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFK1H151P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEEFN1H151UV (PAN)
 
500 шт V-FN, Vibration proof, 50V, 150uF, 105°C, 2000h, 8x10.2mm, ripple 350mArms, 0.34Ohm
A+ EEEFN1H151UP (PAN)
 
в ленте 500 шт V-FN, 50V, 150uF, 105°C, 2000h, 8x10.2mm, ripple 350mArms, 0.34Ohm
A+ EEHZU1H151P (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 50V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEHZU1H151V (PAN)
 
50 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 50V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEEFK1J151AQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 5353
A+ EEEFK1J151AV (PAN)
 
10 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 5353
A+ EEHZU1J151P (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEHZU1J151V (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 4141
A+ EEEFK1V151AL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFN1V151L (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFK1V151AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 3333
A+ EEEFN1V151P (PAN)
 
500 шт V-FN, 35V, 150uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm

Файлы 3

показать свернуть
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Radial Lead Type ZF-A series ● ● ● ● Hybrid Features Endurance : 1000 h at 150 ℃ (High temperature) High temperature compared with ZC series High-withstand voltage (to 63 V), Low LC (0.01 CV) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● Compatible with taping products for automatic insertion ● AEC-Q200 compliant ● RoHS compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan δ) Surge voltage (V) Endurance Shelf life Damp heat (Load) Resistance to soldering heat F G –55 ℃ to +150 ℃ 25 V to 63 V 33 μF to 150 μF 56 μF to 270 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV (μA) After 2 minutes Please see the attached characteristics list Rated voltage × 1.25 (15 ℃ to 35 ℃) +150 ℃ ± 2 ℃, 1000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit Size code ESR after endurance F G (Ω / 100 kHz)(-40 ℃) 0.4 0.3 After storage for 1000 hours at +150 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 ℃ ± 2 ℃, 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After flow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10% of the initial value Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Marking Shape/taping dimensions [Taping type] øD±0.5 12.7±1.0 6.35±1.0 1.0≧ 1.0≧ Series identification F 9.0±0.5 +0.75 -0.50 ød±0.05 0.6±0.3 150 E ZF 18.0±0.5 Capacitance (μF) P1 6.0 ≦ Negative polarity marking (–) 18.50 0 to 1.5 L±1.0 Example : 25 V 150 μF Marking color : BLACK ø4.0±0.2 12.7±0.2 Rated voltage code Lot number ød±0.05 [Bulk type] ⊕ L±1.0 R. voltage code E V H J 3 min. Pressure relief(ø10≦) Unit:V 25 35 50 63 14 min. Size code F G øD 8.0 10.0 L 9.5 9.5 F±0.5 ⊖ øD±0.5 ød 0.6 0.6 F 3.5±0.5 5.0 +0.8 -0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Unit:mm P1 4.60±0.50 3.85±0.50 30-Sep-20 PDF
Документация на EEHAZF1E271 

Series catalog

Дата модификации: 22.09.2021

Размер: 471.8 Кб

9 стр.

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Radial Lead type Series: ZF Type: A NEW Features ● ● ● ● Endurance : 1000 h at 150 °C (High temperature) High temperature compared with ZC series High-withstand voltage ( to 63 V.DC), Low LC (0.01 CV or 3 μA) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● AEC-Q200 compliant ● RoHS compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current F G –55 ℃ to +150 ℃ 25 V.DC to 63 V.DC 33 μF to 150 μF 56 μF to 270 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +150 °C ± 2 °C, 1000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after endurance F G (Ω / 100 kHz)(-40 ℃) 0.4 0.3 After storage for 1000 hours at +150 °C ± 2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in endurance. Shelf life (With voltage treatment) +85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 25 V.DC 270 μF Marking color : BLACK φd±0.05 270 E ZF Capacitance (μF) ⊖ Series identification L±1.0 14 min. 3 min. φD±0.5 Pressure relief (φ10 and larger) F±0.5 ⊕ Negative polarity marking (–) Rated voltage mark Lot number Rated voltage mark 25 E 35 V H J Unit:V.DC 50 63 Size code F G φD 8.0 10.0 L 9.5 9.5 φd 0.6 0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Unit:mm F 3.5 5.0 28-Jun-18 PDF
Документация на серию ZF 

Series catalog

Дата модификации: 07.02.2019

Размер: 367.6 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.