EEHZA1V270V

Конденсатор алюминиевый 35 В x 27 мкФ ±20%, SMD, -55...105 °C, 10000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×6.6 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEHZA1V270P (PAN)
 
в ленте 1000 шт
A+ EEH-ZA1V270V (PAN)
 
 

Файлы 2

показать свернуть
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZA Type: V High temperature lead-free reflow ● ● ● ● Features Endurance : 10000 h at 105 °C Low ESR and high ripple current (70 % over, Lower ESR than current V-FP) High voltage (to 80 V.DC) Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. New lineup of φ6.3 product. (φ6.3, φ8, φ10) ● AEC-Q200 compliant ● RoHS compliant Specifications Size code C D D8 F G Category temp. range –55 ℃ to +105 ℃ Rated voltage range 25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC Nominal cap.range 10 μF to 33 μF 10 μF to 56 μF 22 μF to 100 μF 22 μF to 220 μF 33 μF to 330 μF Capacitance tolerance ±20 % (120 Hz / +20 ℃) DC leakage current I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +105 °C ± 2 °C, 10000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after Endurance C D D8 F G (Ω / 100 kHz)(-40 ℃) 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +105 °C ± 2 °C with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit 33 E ZA Series identification Rated voltage mark Rated voltage mark E V H 25 35 50 J K Unit:V.DC 63 80 (P) + L W Pressure relief (φ10 and larger) Size code Lot number B±0.2 Capacitance (μF) H φD±0.5 Negative polarity marking (–) A±0.2 – C D D8 F G φD 5.0 6.3 6.3 8.0 10.0 L 5.8±0.3 5.8±0.3 7.7±0.3 10.2±0.3 10.2±0.3 A,B 5.3 6.6 6.6 8.3 10.3 (I) 0.3 max. Example : 25 V.DC 33 μF Marking color : BLACK (I) Dimensions (not to scale) K Marking ( )Reference size H 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.2 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.5 1.8 1.8 3.1 4.6 Unit:mm K 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 ·The dimensions of the vibration-proof products, please refer to the page ofthe mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05-Dec-18 PDF
Документация на серию ZA_HYBRID 

Series catalog

Дата модификации: 07.12.2018

Размер: 301.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.