EEHZK1E471P

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 25 В x 470 мкФ ±20%, SMD, -55...125 °C, 4000 ч
развернуть ▼ свернуть ▲
Внешний вид серии ZK_HYBRID

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 10×10×10.3 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 22

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
F~ JCK1E471M100105 (JB)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
F~ EEEFK1E471P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ CS025M471G10PKKKV00R (SUSCON)
 
— — — — — — — — — — — —
A+ CK025M471G10PKKKV00R (SUSCON)
 
— в ленте 3000 шт — — — — — —
A+ EEEFK1V471SV (PAN)
 
— в ленте 500 шт
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEEFT1E471AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3333
A+ EEEHA1E471P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEVFK1V471Q (PAN)
 
— в ленте 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 5353
A+ JCS1E471M100105 (JB)
 
— 500 шт — — — — — — —
A+ CA025M0470REG-1010 (YAG)
 

ECAPSMD 470/25V 1010 CA (YAG) 		— в ленте 500 шт конденсатор алюминиевый SMD 470 мкФ 25 В -40...85 °C 2000 ч — — — Surface Mount Aluminum electrolytic
A+ EEETK1H471AV (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 6767
A+ EEVTG1H471M (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 6767
A+ EEVTG1V471M (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 6767
A+ EEVTG1E471Q (PAN)
 
— в ленте 200 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 5353
A+ EEEFK1V471SP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEEFK1V471AV (PAN)
 
— 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 5353
A+ EEETK1H471AM (PAN)
 
— 125 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 6767
A+ EEEFK1V471AQ (PAN)
 
— в ленте 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 5353
A+ EEETK1E471AQ (PAN)
 
— 12 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 5353
A+ EEEFN1V471UP (PAN)
 
— 500 шт — — — — V-FN, 35V, 470uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEEFN1V471UV (PAN)
 
— 500 шт — — — — V-FN, Vibration proof, 35V, 470uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEVTG1V471UQ (PAN)
 
— 200 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 5353

Файлы 2

показать свернуть
2019 Products Catalog Hybrid Conductive Polymer Hybrid Aluminum Electrolytic Capacitors PDF
Документация на семейство Hybrid Cap 

Products catalog

Дата модификации: 27.02.2019

Размер: 1.16 Мб

25 стр.

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZK Type: V High temperature lead-free reflow Features ● ● ● ● High capacitance and High ripple current compared with ZC series Endurance : 4000 h at 125 °C (High temperature / Long life) Low ESR (85 % over, Lower ESR than Current V-TP), Low LC (0.01 CV or 3 μA) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. New lineup of φ6.3 product.（φ6.3、φ8、φ10） ● AEC-Q200 compliant ● RoHS compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current C D8 F G –55 ℃ to +125 ℃ 25 V.DC to 35 V.DC 33 μF to 47 μF 56 μF to 68 μF 100 μF to 150 μF 180 μF to 270 μF 330 μF to 470 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +125 °C ± 2 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after Endurance C D D8 F G (Ω / 100 kHz)(-40 ℃） 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) +85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit 0.3 max. 47 E ZK Series identification （P） Capacitance (μF) B±0.2 Negative polarity marking (–) A±0.2 – H φD±0.5 Example : 25 V.DC 47 μF Marking color : BLACK + L W Pressure relief (φ10 and larger) ( )Reference size Rated voltage mark Size code Lot number Rated vol. mark E V Unit：V.DC 25 35 C D D8 F G φD 5.0 6.3 6.3 8.0 10.0 L 5.8±0.3 5.8±0.3 7.7±0.3 10.2±0.3 10.2±0.3 A、B 5.3 6.6 6.6 8.3 10.3 （I） Dimensions (not to scale) （I） Marking D H 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.2 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.5 1.8 1.8 3.1 4.6 Unit：ｍｍ K 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 ·The dimensions of the vibration-proof products, please refer to the page ofthe mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07-Feb-19 PDF
Документация на серию ZK_HYBRID 

Series catalog

Дата модификации: 07.02.2019

Размер: 296.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)