EEHZT1E331V

Конденсатор алюминиевый 25 В x 330 мкФ ±20%, SMD, -55...125 °C
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 10×10×10.3 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 22

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEHZC1E331V (PAN)
 
500 шт
A+ EEEFN1V331UP (PAN)
 
в ленте 500 шт V-FN, 35V, 330uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
A+ JCK1E331M100105 (JB)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ JCK1V331M100105 (JB)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ JCP1E331M080090 (JB)
 
в ленте 10 шт
 
A+ CDL050M331XDBPKKKV00R (SUSCON)
 
в ленте 1500 шт
A+ CK025M331G10PKKKV00R (SUSCON)
 
в ленте 3000 шт
A+ CD025M331F10PKKKV00R (SUSCON)
 
в ленте 3000 шт
A+ EEEFK1E331P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFK1V331AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFK1V331GP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFK1V331P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFT1H331AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFT1V331AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEHZA1E331P (PAN)
 
в ленте 500 шт
A+ EEHZK1V331P (PAN)
 
в ленте 500 шт
A+ 25SVPF330M (PAN)
 
в ленте 400 шт High Voltage / Large capacitance
A+ CS035M331G10PKKKV00R (SUSCON)
 
A+ EEHZC1E331P (PAN)
 
500 шт
A+ EEEHBE331UAP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEETK1V331AQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEH-ZK1E331UP (PAN)
 
 

Файлы 1

показать свернуть
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type ZT series Hybrid High temperature lead-free reflow Features Endurance: 4000 h at 125 ℃ Higher ripple current (75 % to 118 % higher than ZC series) Vibration-proof product is available upon request. AEC-Q200 compliant RoHS compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan δ) Surge voltage (V) Endurance Shelf life Damp heat (Load) Resistance to soldering heat F G –55 ℃ to +125 ℃ 25 V to 63 V 33 μF to 220 μF 56 μF to 330 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV (μA) After 2 minutes Please see the attached characteristics list Rated voltage × 1.25 (15 ℃ to 35 ℃) +125 ℃ ± 2 ℃, 4000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit Size code ESR after endurance F G (Ω / 100 kHz)(-40 ℃) 0.4 0.3 After storage for 1000 hours at +125 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) 85 ℃ ± 2 ℃, 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10% of the initial value Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) (P) L W Pressure relief (ø10 ≦) G L 8.0 10.2±0.3 H A, B max. 8.3 10.0 10.2±0.3 10.3 Unit:mm I W P K 10.0 3.4 0.90±0.2 3.1 0.70±0.2 12.0 3.5 0.90±0.2 4.6 0.70±0.2 K R H øD±0.5 Rated voltage code A±0.2 F (P) [Vibration-proof product] (I) ( ) Reference size (S) Lot number L R. voltage code E 25 V 35 Size code øD L H 50 F 8.0 10.5±0.3 J 63 G 10.0 Pressure relief (ø10 ≦) Unit:V H A, B max. 8.3 10.5±0.3 10.3 T W Supportive terminals (I) 220 E ZT F øD B±0.2 Series identification Size code (I) H Capacitance (μF) øD±0.5 Negative polarity marking (–) A±0.2 0.3 max. K (I) [Standard] Example : 25 V 220 μF Marking color : BLACK B±0.2 ● ● ● ● ● ( ) Reference size Unit:mm F I W P 10.0 0 to +0.15 3.4 1.2±0.2 3.1 12.0 0 to +0.15 3.5 1.2±0.2 4.6 K S T 0.70±0.2 0.70±0.2 5.3 1.3±0.2 0.70±0.2 0.70±0.2 6.9 1.3±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. R 30-Sep-20 PDF
Документация на EEHZT1E221P 

Series catalog

Дата модификации: 22.09.2021

Размер: 494.4 Кб

9 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.