EEUFK0J822

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 6.3 В x 8200 мкФ ±20%, Radial, -55...105 °C, 5000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FK_THT

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Ток пульсаций низких частот
Диаметр x Высота 16×16×25 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 8

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEUFR0J822 (PAN)
 
— 100 шт — — — —
A+ EEUFS0J822L (PAN)
 
— 100 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFS0J822S (PAN)
 
— 100 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFK0J822S (PAN)
 
— 50 шт — — — —
A+ EEUFS1A822 (PAN)
 
— 100 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFS1A822B (PAN)
 
— 250 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFK1A822S (PAN)
 
— 50 шт — — — —
A+ EEUFC0J822 (PAN)
 
— 50 шт — — — —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type FK-A series Features ● ● ● ● ● Endurance : 105 ℃ 3000 h to 5000 h Low impedance (10 % to 30 % less than FC Series) Miniaturization (30 % to 40 % less than FC Series) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –55 ℃ to +105 ℃ 6.3 V to 35 V 180 μF to 12000 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV (μA) After 2 minutes Rated voltage（V） 6.3 10 16 25 35 (120 Hz /+20℃) Dissipation factor（tan δ) Dissipation factor（tan δ) 0.22 0.19 0.16 0.14 0.12 For capacitance value ≧ 1000 μF , add 0.02 per every 1000 μF. After following life test with DC voltage and +105 ℃±2 ℃ ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the capacitors are restored to 20 ℃, the capacitors shall meet the limits specified bellow. Duration Endurance ø8 : 3000 h, ø10 : 4000 h, ø12.5 to ø18 : 5000 h Capacitance change Within ±20 % of the initial value Dissipation factor（tan δ) ≦ 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 ℃±2 ℃ with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.（Hz) Cap.（μF） 180 to 330 390 to 1000 1200 to 12000 60 120 1k 10 k 100 k 0.60 0.65 0.75 0.70 0.75 0.80 0.85 0.90 0.95 0.95 0.98 1.00 1.00 1.00 1.00 ød±0.05 Dimensions Pressure relief ø8 14min. L* ø10 ≦ F±0.5 Sleeve 3min. øD±0.5 * L ≦ 16：L±1.5 øD±0.5 L ≧ 20：L±2.0 øD L ød F 8.0 ― 0.6 3.5 10.0 ― 0.6 5.0 12.5 to 25 0.6 5.0 12.5 30 to 40 0.8 5.0 16.0 ― 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Unit：mm 18.0 ― 0.8 7.5 20-Dec-19 PDF
Документация на EEUFK0J102L 

Series catalog

Дата модификации: 24.09.2021

Размер: 594 Кб

12 стр.

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FK Type : A Features ● Low impedance (10 % to 30 % less than FC Series) Miniaturization (30 % to 40 % less than FC Series) ● Endurance : 105 °C 3000 h to 5000 h ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current V.DC tan d Dissipation factor (tan d) Endurance –55 °C to +105 °C 6.3 V.DC to 35 V.DC 180 µF to 12000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes 6.3 10 16 25 35 0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 °C) Add 0.02 per 1000 µF for products of 1000 µF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified bellow. Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours Capacitance change tan d DC leakage current Within ±20 % of the initial value < 200 % of the initial limit Within the initial limit Shelf life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Rated voltage (V.DC) 6.3 to 35 Frequency (Hz) Capacitance (µF) 60 120 1k 10 k 100 k 180 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 to 12000 0.75 0.80 0.95 1.00 1.00 1200 Sleeve Pressure relief fd±0.05 Dimensions 010 < 08 + L✽ 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 ✽ L < 16 : L±1.5 L > 20 : L±2.0 (Unit : mm) 0D 8 10 16 18 L — — 12.5 to 25 30 to 40 — — 0d 0.6 0.6 0.6 0.8 0.8 0.8 F 3.5 5.0 5.0 5.0 7.5 7.5 12.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 PDF
Документация на серию FK_THT 

N_AEC_A-FK_E.indd

Дата модификации: 27.03.2019

Размер: 109.8 Кб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)