EEUFM0J472L

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 6.3 В x 4700 мкФ ±20%, Radial, -40...105 °C, 7000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FM_THT

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Ток пульсаций низких частот
Диаметр x Высота 12.5×12.5×30 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ ECA1AHG472 (PAN)
 
— 100 шт — — — — 105°C / Standard / 6.3V to 450V
A+ EEUFR0J472 (PAN)
 
— 200 шт — — — —
A+ EEUFR1A472L (PAN)
 
— 100 шт — — — —
A+ ECA0JHG472 (PAN)
 
— 100 шт — — — — 105°C / Standard / 6.3V to 450V
A+ ECA0JM472 (PAN)
 
— 100 шт — — — —
A+ JRB1A472M05001300250000B (JB)
 
— 1 шт — — — — — — — —
A+ JRC0J472M05001300250000B (JB)
 
— — — — —
A+ JRC1A472M05001300250000B (JB)
 
— — — — —
A+ JRC1A472M05001300260000B (JB)
 
— — — — — — —
A+ SJ010M4700B5S-1335 (YAG)
 
— 200 шт конденсатор алюминиевый Radial 4700 мкФ 10 В -40...105 °C 5000 ч — —
A+ SY010M4700B5S-1335 (YAG)
 
— 200 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 4700uF
A+ EEUFS1A472B (PAN)
 
— 500 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ ECA1AHG472B (PAN)
 
— 500 шт — — — — 105°C / Standard / 6.3V to 450V
A+ ECA0JM472B (PAN)
 
— 500 шт — — — —
A+ EEUFK0J472 (PAN)
 
— 100 шт — — — —
A+ EEUTA1A472SB (PAN)
 
— 250 шт — — — —
A+ ECA1AM472 (PAN)
 
— 100 шт — — — —
A+ ECA1AM472B (PAN)
 
— 500 шт — — — —
A+ EEUFR0J472B (PAN)
 
— 500 шт — — — —
A+ EEUFK1A472L (PAN)
 
— 100 шт — — — —
A+ EEUFK1A472S (PAN)
 
— 100 шт — — — —
A+ EEUFR1A472S (PAN)
 
— 100 шт — — — —
A+ EEUFR1A472SB (PAN)
 
— 250 шт — — — —
A+ EEUFS1A472 (PAN)
 
— 200 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFC0J472 (PAN)
 
— 100 шт — — — —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type FM-A series Features ● Endurance : 105 ℃ 2000 h to 7000 h ● Low impedance (40 % to 70 % less than FC series) ● RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –40 ℃ to +105 ℃ 6.3 V to 50 V 22 μF to 6800 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV (μA) After 2 minutes Rated voltage（V） 6.3 10 16 25 35 50 (120 Hz /+20℃) Dissipation factor（tan δ) Dissipation factor（tan δ) 0.22 0.19 0.16 0.14 0.12 0.10 For capacitance value ≧ 1000 μF, add 0.02 per every 1000 μF. After following life test with DC voltage and +105 ℃±2 ℃ ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the capacitors are restored to 20 ℃, the capacitors shall meet the limits specified bellow. Duration ø5 to ø6.3 : 2000 h, ø8×11.5 to ø8×15: 3000 h Endurance ø8×20 to ø10×16 : 4000 h, ø10×20 to ø12.5×20/ ø16×20 : 5000 h ø12.5×25 to ø12.5×35/ ø16×25 : 7000 h Capacitance change Within ±25 % of the initial value (6.3 V to 10 V : ±30 %) Dissipation factor（tan δ) ≦ 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 ℃±2 ℃ with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.（Hz) Cap.（μF） 2.2 to 33 47 to 330 390 to 1000 1200 to 6800 60 120 1k 10 k 100 k 0.45 0.60 0.65 0.75 0.55 0.70 0.75 0.80 0.75 0.85 0.90 0.95 0.90 0.95 0.98 1.00 1.00 1.00 1.00 1.00 ød±0.05 Dimensions Sleeve Pressure relief ≦ ø8 ø10 ≦ 14min. L* F±0.5 ø6.3 ≦ 3min. øD±0.5 * L ≦ 16：L±1.5 øD±0.5 L ≧ 20：L±2.0 øD L ød F 5.0 ― 0.5 2.0 6.3 ― 0.5 2.5 8.0 ― 0.6 3.5 10.0 ― 0.6 5.0 12.5 12.5 to 25 30 to 40 0.6 0.8 5.0 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Unit：mm 16.0 ― 0.8 7.5 28-Feb-20 PDF
Документация на EEUFM0J102B 

Series catalog

Дата модификации: 24.09.2021

Размер: 578.9 Кб

11 стр.

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FM Type : A Features ● Low impedance (40 % to 70 % less than ● Endurance : 105 °C 2000 h to 7000 h ● RoHS compliant FC Series) Attention ● Not applicable for automotive Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life –40 °C to +105 °C 6.3 V.DC to 50 V.DC 22 µF to 6800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes V.DC 6.3 10 16 25 35 50 (max.) (120 Hz/+20 °C) tan d 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 µF for products of 1000 µF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours 08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20 : 5000 hours 012.5×25 to 012.5×35/ 016×25 : 7000 hours Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current Rated voltage (V.DC) 6.3 to 50 Capacitance (µF) 22 47 390 1200 to to to to 60 0.45 0.60 0.65 0.75 33 330 1000 6800 Frequency (Hz) 1k 0.75 0.85 0.90 0.95 120 0.55 0.70 0.75 0.80 10 k 0.90 0.95 0.98 1.00 100 k 1.00 1.00 1.00 1.00 fd±0.05 Dimensions Sleeve Pressure relief 06.3 < < 08 010 < + L✽ ✽ 0D L 0d F 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 L < 16 : L±1.5 L > 20 : L±2.0 5 — 0.5 2.0 (Unit : mm) 6.3 — 0.5 2.5 8 — 0.6 3.5 10 — 0.6 5.0 12.5 12.5 to 25 30 to 40 0.6 0.8 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 16 — 0.8 7.5 Mar. 2016 PDF
Документация на серию FM_THT 

N_AEC_A-FM_E.indd

Дата модификации: 27.03.2019

Размер: 100.5 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    CE025M0047RED-0605 (YAG)