EEUFP1E102B

Конденсатор алюминиевый 25 В x 1000 мкФ ±20%, Radial, -55...105 °C, 4000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 10×10×20 мм
Примечание High ripple current, Large capacitance, Automotive
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 26

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= EEUFP1E102 (PAN)
 
200 шт High ripple current, Large capacitance, Automotive
P- ECA1EHG102B (PAN)
 
500 шт 105°C / Standard / 6.3V to 450V
P- ECA1EHG102 (PAN)
 
200 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ HF035M102I25TKKKS00R (SUSCON)
 
1800 шт
A+ SD050M102J26TKKKS00R (SUSCON)
 
1250 шт
A+ HX050M102J25TKKKS00R (SUSCON)
 
1560 шт
A+ HX025M102G16PKKKS00R (SUSCON)
 
600 шт
A+ JRB1E102M05001000210000B (JB)
 

ECAP 1000/25V 1021 105C (JB)
250 шт конденсатор алюминиевый Radial 1000 мкФ 25 В  -40...105 °C 2000 ч
A+ JRC1E102M05001000210000B (JB)
 
250 шт
A+ JRB1H102M05001300250000B (JB)
 

ECAP 1000/50V 1326 105C (JB)
1 шт конденсатор алюминиевый Radial 1000 мкФ 50 В  -40...105 °C 2000 ч Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ JRB1H102M05001300210000B (JB)
 
1 шт
A+ SK035M102G20TKKKS00R (SUSCON)
 
3600 шт
 
A+ SK025M102G20PKKKS00R (SUSCON)
 
7 шт
A+ EEUFC1H102 (PAN)
 
50 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ SK035M102I21TKKKS00R (SUSCON)
 
2100 шт
A+ SK050M102I25TKKKS00R (SUSCON)
 
1800 шт
A+ JRB1V102M05001300200000B (JB)
 
250 шт конденсатор алюминиевый Radial 1000 мкФ 35 В  -40...105 °C 2000 ч
A+ UK035M102I21TKKKS00R (SUSCON)
 
2100 шт
A+ UK025M102I20TKKKS00R (SUSCON)
 
2100 шт
 
A+ ECA1HM102 (PAN)
 
100 шт
A+ ECA1EM102 (PAN)
 
200 шт
A+ ECA1HHG102 (PAN)
 
100 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ EEUFC1V102 (PAN)
 
100 шт
A+ EEUFC1E102 (PAN)
 
100 шт
A+ EEUFM1V102 (PAN)
 
100 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ EEUFR1E102B (PAN)
 
в ленте 500 шт

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Radial Lead Type FP-A series Features ● ● ● ● ● Country of origin Endurance : 105 ℃ 4000 h to 5000 h High ripple current (2 to 2.5 times as high as FC series) Large capacitance (Up to 60 % larger than FC series) AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –55 ℃ to +105 ℃ 25 V to 35 V 510 μF to 2000 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV (μA) After 2 minutes Rated voltage(V) 25 35 (120 Hz /+20℃) Dissipation factor(tan δ) Dissipation factor(tan δ) 0.14 0.12 For capacitance value ≧ 1000 μF, add 0.02 per every 1000 μF. After following life test with DC voltage and +105 ℃±2 ℃ ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the capacitors are restored to 20 ℃, the capacitors shall meet the limits specified bellow. Endurance Shelf life Duration ø10 : 4000 h, ø12.5 : 5000 h Capacitance change Within ±30 % of the initial value Dissipation factor(tan δ) ≦ 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 ℃±2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.(Hz) Cap.(μF) 510 to 1000 1200 to 2000 120 1k 10 k 100 k to 0.65 0.75 0.75 0.80 0.95 1.00 1.00 1.00 Sleeve Pressure relief 14min. L* F±0.5 ød±0.05 Dimensions 3min. øD±0.5 * L ≦ 16:L±1.5 L ≧ 20:L±2.0 øD L ød F 10.0 16 to 20 0.6 5.0 12.5 20 to 25 0.6 5.0 Unit:mm Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 PDF
Документация на EEUFP1E102B 

Series catalog

Дата модификации: 24.09.2021

Размер: 480.1 Кб

9 стр.

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FP Type : A Features Country of origin ● High ● Malaysia ripple current (2 to 2.5 times as high as FC series) capacitance (Up to 60 % larger than FC series) ● Endurance : 105 °C 4000 h to 5000 h ● RoHS compliant ● Large Specifications Category temperature range –55 °C to +105 °C Rated voltage range 25 V.DC to 35 V.DC Capacitance range 510 µF to 2000 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes 25 35 (max.) (120 Hz/+20 °C) 0.14 0.12 Add 0.02 per 1000 µF for products of 1000 µF or more. Leakage current V.DC tan d Dissipation factor (tan d) After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 010 : 4000 hours, 012.5 : 5000 hours Endurance Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 compliant Shelf life AEC-Q200 Frequency correction factor for ripple current Rated voltage (V.DC) Frequency (Hz) Capacitance (µF) 25 to 35 120 1k 10 k 100 k to 510 to 1000 0.65 0.75 0.95 1.00 1200 to 2000 0.75 0.80 1.00 1.00 Sleeve Pressure relief fd±0.05 Dimensions + (Unit : mm) L✽ ✽ L < 16 : L±1.5 L > 20 : L±2.0 14 min. 3 min. 0D±0.5 F±0.5 – 0D L 0d F 10 16 to 20 0.6 5.0 12.5 20 to 25 0.6 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2018 PDF
Документация на серию FP_THT 

Series catalog

Дата модификации: 27.03.2019

Размер: 134.4 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.