MS9708

Ruimeng Technology
MS9708/MS9710/MS9714 High-speed, Low Power Dissipation DAC PRODUCT DESCRIPTION The MS9708/MS9710/MS9714 is a 8-Bit/10-Bit/14-Bit high-speed and low power dissipation DAC. When sample rate reaches 125MSPS, the MS9708/MS9710/MS9714 can also provide perfect AC and DC characteristics. The normal operating voltage ranges +2.7V to +5.5V. The feature of low power dissipation can make it suitable for p...
развернуть ▼ свернуть ▲
Внешний вид MS9708

Технические характеристики

показать свернуть
Корпус TSSOP-28
Разрешение преобразователя
Кол-во каналов
Скорость преобразования
Интерфейс обмена данными
Диапазон выходных напряжений
Диапазон выходных токов
Потребляемая мощность
Конфигурация источника опорного напряжения
Диапазон напряжений питания аналоговой части
Примечание 8-Bit high-speed and low power dissipation DAC
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
MS9708/MS9710/MS9714 High-speed, Low Power Dissipation DAC PRODUCT DESCRIPTION The MS9708/MS9710/MS9714 is a 8-Bit/10-Bit/14-Bit high-speed and low power dissipation DAC. When sample rate reaches 125MSPS, the MS9708/MS9710/MS9714 can also provide perfect AC and DC characteristics. The normal operating voltage ranges +2.7V to +5.5V. The feature of low power dissipation can make it suitable for portable and low power dissipation products. By decreasing full-scale current output, power dissipation can be reduced to 45mW without affecting performance. In addition, in sleep mode, power dissipation can be reduced to about 20mW. The MS9708/MS9710/MS9714 combines a segmented current source architecture with specialized switch technique, in order to reduce spurious components and improve dynamic characteristics. Edge-triggered input latch and temperature compensated bandgap reference are integrated together so as to get a complete monolithic DAC solution. Full-scale current output is 20mA and output impedance is more than 100kΩ. Complementary current output provides single-end or differential applications. Current output terminal can be connected with two output resistors, achieving two complementary, single-ended voltage outputs. The defaulted output voltage is 1.25 V. The MS9708/MS9710/MS9714 includes a 1.2V internal reference and reference control amplifier, which can set full-scale current by adjusting external resistor. The MS9708/MS9710/MS9714 can also connect with external reference. The output current is from 2mA to 20mA without affecting dynamic characteristics. The MS9708/MS9710/MS9714 is available in TSSOP28 package. FEATURES  8bit Resolution (MS9708), 10bit Resolution (MS9710), 14bit Resolution (MS9714)  Update Rate: 125MSPS  Power Dissipation: 175mW @ 5V to 45mW @ 3V  Power-down Mode: 20mW @ 5V  Internal Reference: 1.2V  Edge-Triggered Latch  TSSOP28 Package TSSOP28 TSSOP-28 APPLICATIONS  Communication  Signal Reconstruction  Portable Device PRODUCT SPECIFICATION Part Number Package Marking MS9708 TSSOP28 MS9708 MS9710 TSSOP28 MS9710 MS9714 TSSOP28 MS9714 Hangzhou Ruimeng Technology Co.,Ltd http://www.relmon.com VERSION: V1.2 2023.04.12 - PAGE 1 - PDF
Документация на MS9708 

TONE RINGER JO肙 JARDIM x8?! PORRA! DIA 8 VOTA N肙!

Дата модификации: 12.04.2023

Размер: 867.1 Кб

21 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MCP4725A0T-E/CH (MCRCH)