RS2T45XVS8

Runic
RS2T45 2-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs FEATURES         DESCRIPTION Control Input threshold Referenced to VCCA Voltage Power-Supply Range: VCCA and VCCB: 1.65V to 5.5V VCC Isolation: If Either VCC is at GND, Both Ports are in the High-Impedance State Low power consumption, 4uA Max Output drives up to ±24mA@3.0V No Power-Supp...
развернуть ▼ свернуть ▲
Внешний вид серии RS2T45

Технические характеристики

показать свернуть
Корпус VSSOP-8
Тип выходного сигнала
Особенности
Напряжение питания входа
Напряжение питания выхода
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
RS2T45 2-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs FEATURES         DESCRIPTION Control Input threshold Referenced to VCCA Voltage Power-Supply Range: VCCA and VCCB: 1.65V to 5.5V VCC Isolation: If Either VCC is at GND, Both Ports are in the High-Impedance State Low power consumption, 4uA Max Output drives up to ±24mA@3.0V No Power-Supply Sequencing Required: Either VCCA or VCCB can be Ramped First IOFF: Supports Partial-Power-Down Mode Operation Extended Temperature: -40°C to +125°C APPLICATIONS     Industrial Enterprise Telecom, such as VOIP Personal electronic The RS2T45 is 2-bit non-inverting bus transceiver uses two separate configurable power supply rails. The A port and DIR are designed to track VCCA, which supporting operating voltages from 1.65V to 5.5V, and the B port supporting operating voltages from 1.65V to 5.5V while it tracks the VCCB supply. This allows for universal low-voltage bidirectional translation between any of the 1.8V, 2.5V, 3.3V and 5V voltage nodes. The RS2T45 is designed for asynchronous communication between two data buses. The logic levels of the directioncontrol (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry is always active on both A and B ports and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ. The RS2T45 is available in Green SOT23-8, MSOP-8 and VSSOP-8 packages. It operates over an ambient temperature range of -40°C to +125°C. Functional Block Diagram DIR A1 5 2 7 A2 3 6 VCCA REV A.1 B1 B2 VCCB 1 / 17 www.run-ic.com PDF
Документация на серию RS2T45 

Дата модификации: 05.12.2022

Размер: 978.9 Кб

17 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    RS0101YH6 (RUNIC)