SH79F7010/100PR

SH79F7010 Enhanced 8051 Microcontroller with RTC,ISO 7816 interface and LCD driver 1. Features  8051 compatible Pipe-lined instruction based on the  Temperature Sensor(0.5 degree typ.)  Real-Time Clock(Trimming step:0.127PPM) single-chip 8-bit micro-controller  Flash ROM: 128K Bytes  Two 12-bit PWM timer  RAM: internal 256 Bytes and external 3840 Bytes  LCD driver:(R type and C typ...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус LQFP-100
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём EEPROM памяти
Объём оперативной памяти
Количество входов/выходов
Интерфейсы
Периферия
АЦП/ЦАП
Напряжение питания
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
SH79F7010 Enhanced 8051 Microcontroller with RTC,ISO 7816 interface and LCD driver 1. Features  8051 compatible Pipe-lined instruction based on the  Temperature Sensor(0.5 degree typ.)  Real-Time Clock(Trimming step:0.127PPM) single-chip 8-bit micro-controller  Flash ROM: 128K Bytes  Two 12-bit PWM timer  RAM: internal 256 Bytes and external 3840 Bytes  LCD driver:(R type and C type) :  Operation voltage: 2.0V - 5.5V -4 x 40 (1/3 bias)  Oscillator: -6 x 38 (1/4 bias) - fOSC=32.768kHz -8 x 36 (1/4 bias)  4/5/6/7/8 x 8 LED Driver - Built-in PLL=8.192MHz - Internal RC:128kHz  Built-in low power detection (LPD) - Internal RC:12MHz  Built-in low voltage reset (LVR) function (enabled  88 CMOS general purpose I/O ports by code option)  Built-in pull-up resistor for I/O LVR voltage1: 2.1V  Four 16-bit timer / counters: T0, T1,T2&T3  Powerful interrupt sources: - Timer0, Timer1, Timer2,Timer3 - External interrupt 4 - EUART0, EUART1, EUART2, EUART3 - RTC, LPD - ADC/TPS, PWM, 7816, SPI  8 channels 12-bit Analog to Digital Converter LVR voltage: 4.1V  Built-in Watch Dog Timer (WDT)  Warm-up timer for power-on reset  CPU Machine cycle: 1 oscillator clock  Support Low power operation modes: - IDLE Mode - Power-Down Mode (ADC) with built-in compare function  Low-power Consumption  2 channels ISO7816 interface  3 bytes ID code  SPI Interface  Package:LQFP100  EUART0, EUART1 (built-in IR), EUART2,EUART3 2. General Description The SH79F7010 is a low-cost, integrating RTC,ISO 7816 interface,LCD driver and enhanced 8051 Microcontroller. The SH79F7010 retains most features of the standard 8051. These features include internal 256 bytes RAM, two16-bit timer / counters, 1 UART, and external interrupt INT1. In addition, the SH79F7010 provides external 3840 bytes RAM (not include LCD RAM),two-12bit PWM outputs, external interrupt INT4,16-bit timer/counter (Timer2) compatible with 8052. It contains a 128K Bytes Flash memory block for program and data. Some standard serial communication modes such as EUART、IR are supported in SH79F7010. Also the LCD driver, ADC and RTC are incorporated in SH79F7010. For high reliability and low cost issues, the SH79F7012 builds in PLL clock,internal RC, Watchdog Timer, Low Voltage Reset function, Temperature Sensor and oscillator fail detection. SH79F7010 also supports two power supply modes and two power saving modes to reduce power consumption. 1 V0.1 PDF
Документация на SH79F7010/100PR 

1 Keywords:

Дата модификации: 07.04.2023

Размер: 2.61 Мб

153 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.