1.5SMC100A

SUNCO
1.5SMC SERIES Surface Mount Transient Voltage Suppressor Diodes Uni-directional Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement ● Available in Unidirectional and Bidirectional ● 1500W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High temperat...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус DO214AB
Пиковая рассеиваемая мощность
Напряжение ограничения (диапазон)
Максимальное импульсное напряжение
Ток утечки при рабочем напряжении
Максимальный импульсный ток
Тип супрессора по свойствам
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
1.5SMC SERIES Surface Mount Transient Voltage Suppressor Diodes Uni-directional Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement ● Available in Unidirectional and Bidirectional ● 1500W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High temperature soldering guaranteed: 260 °C/10 s at terminals ● Meets MSL level 1 Bi-directional ● Component in accordance to Typical Applications Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, telecommunication. Mechanical Data ● Package: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating, -compliant ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types ■Maximum Ratings (Ta=25℃ Unless otherwise specified） SYMBOL UNIT Conditions Max PPPM W with a 10/1000us waveform 1500 IPPM A with a 10/1000us waveform See Next Table Power dissipation(2) PD W on infinite heat sink at TL=75℃ 6.5 Peak forward surge current(3) IFSM A 8.3 ms single half sine-wave unidirectional only 200 TJ,TSTG ℃ ESD KV PARAMETER Peak power dissipation(1)(2) Peak pulse current (1) Operating junction and storage temperature range Electrostatic Discharge Electrostatic Discharge -55 to +150 IEC61000-4-2 air discharge ±30 IEC61000-4-2 contact discharge ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） PARAMETER Maximum instantaneous forward voltage at 100A for unidirectional only(4) SYMBOL UNIT VALUE VFM V 3.5/5.0 1/6 S-S001 Rev.3.1,8-Aug-24 Shanghai Sunco Electronics Co., Ltd. www.russiansunco.com PDF
Документация на 1.5SMC100A 

Author:

Дата модификации: 12.03.2025

Размер: 483.6 Кб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    1.5SMC510A (BOURNS)