EP035M560E08PKKKS00R

Su’scon
Конденсатор алюминиевый 35 В x 56 мкФ ±20%, RADIAL, -55...125 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии EP

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×8 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 23

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEUFR1H560 (PAN)
 
— 200 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ JRG1V560M02500630115000B (JB)
 
— — — — — —
A+ EEUFM1H560 (PAN)
 
— 200 шт — — — —
A+ EEHAZT1J560B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEH-AZA1J560B (PAN)
 
—
 
 — — —
A+ EEH-AZC1J560B (PAN)
 
—
 
 — — —
A+ EEH-AZE1J560B (PAN)
 
—
 
 — — —
A+ EEH-AZF1H560 (PAN)
 
—
 
 — — —
A+ EEH-AZF1H560B (PAN)
 
—
 
 — — —
A+ 63SXE56M (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEH-AZF1J560B (PAN)
 
—
 
 — — —
A+ EEUFC1J560 (PAN)
 
— 200 шт — — — —
A+ EEUFR1H560B (PAN)
 
— 2000 шт — — — —
A+ EEH-AZT1J560B (PAN)
 
—
 
 — — —
A+ EEUFR1H560H (PAN)
 
— 2000 шт — — — —
A+ EEHAZA1J560B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEHAZC1J560B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEHAZE1J560B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEHAZF1H560B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 50V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEHAZF1J560B (PAN)
 
— в коробках 324 шт
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount
A+ EEUFC1V560 (PAN)
 
— 200 шт — — — —
A+ EEUFC1V560B (PAN)
 
— 2000 шт — — — —
A+ EEUFC1V560H (PAN)
 
— 2000 шт — — — —

Файлы 1

показать свернуть
Conductive Polymer Aluminum Solid Capacitors EP series ‧High temperature, low ESR, High ripplie current capability ‧Rated voltage : 6.3~35V ‧Endurance : 2,000hours at 125℃ ‧Applications : Lamps Power, LED Power, Service Equipment. ‧RoHS compliant ‧Halogen Free compliant EP SPECIFICATIONS Items Conditions Category Temperature Range Rated Voltage Range Characteristics — -55 to +125℃ — 6.3 ~ 35V Capacitance Tolerance at 20℃,120Hz ±20%(M) Surge Voltage at 125℃ Leakage Current at 20℃ after 2 minutes Dissipation Factor ( tan δ) at 20℃,120Hz Rated voltage ×1.15V I ≦ 0.2CV or 300(μA) Whichever is greater measured,after 2minutes application of rated working voltage at +20℃. Please see the attached characteristics list Please see the attached characteristics list Characteristics of Impedance at low, high temperature at -55℃,100kHz Z(-55℃)/Z(+20℃) at +105℃,100kHz Z( +105℃)/Z(+20℃) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 125℃. Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to store at 60℃, 90 to 95% RH for 1,000 hours ,without DC applied. Damp Heag (Steady State) The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30 seconds Surge Voltage Appearance ≦ 1.25 ≦ 1.15 NO significant damage. Capacitance change ≦ ±20% of the initial value. DF(tanδ) ≦ 150% of the initial specified value. ESR ≦ 150% of the initial specified value. Leakage current ≦ The initial specified value. Appearance NO significant damage. Capacitance change ≦ ±20% of the initial value. DF(tanδ) ≦ 150% of the initial specified value. ESR ≦ 150% of the initial specified value. Leakage current ≦ The initial specified value. Appearance NO significant damage. Capacitance change ≦ ±20% of the initial value. DF(tanδ) ≦ 150% of the initial specified value. ESR ≦ 150% of the initial specified value. Leakage current ≦ The initial specified value. ※ Note:If any doubt arises,measure the leakage current after following voltage treatment. Voltage treatment :DC rated voltage are applied to the capacitors for 120 minutes at 125℃. MARKING AND DIMENSIONS 470 470 16 16 Series Code Rated Capacitance Rated d±0.05 D+0.5 EP1512 ET1212 EP1512 Polarity Marking (Cathode) L P±0.5 Coated Case 38 19min 3.5min (Unit:mm) Size ψD 6.3x8 8x8 8x12 10x10 10x12 6.3 8.0 8.0 10.0 10.0 L L+1.5 max L+1.5 max L+1.0 max L+1.0 max L+1.0 max ψd 0.5 0.6 0.6 0.6 0.6 P 2.5 3.5 3.5 5.0 5.0 PDF
Документация на серию EP 

Дата модификации: 01.11.2022

Размер: 633.4 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)