PH016M821GCBPKKKV00R

Su’scon
Конденсатор алюминиевый 16 В x 820 мкФ ±20%, SMD, -55...105 °C, 20000 ч
развернуть ▼ свернуть ▲
Внешний вид серии PH

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 10×10×12.5 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 13

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEEFT1C821UP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 3333
A+ EEEFN1E821UL (PAN)
 
— — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFT1E821AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFT1E821AV (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFT1E821GP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFT1E821GV (PAN)
 
—
 
 — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ 16SVPG820M (PAN)
 
—
 
 — — — — Super Low ESR / High ripple current
A+ EEEFPC821UAL (PAN)
 
—
 
 — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFPC821UAP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFPC821UAV (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 4141
A+ EEEFT1C821UV (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 820uF, Surface Mount, 3333
A+ EEEFN1E821UV (PAN)
 
— 500 шт — — — — V-FN, Vibration proof, 25V, 820uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEEFN1E821UP (PAN)
 
— 500 шт — — — — V-FN, 25V, 820uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm

Файлы 1

показать свернуть
Conductive Polymer Aluminum Solid Capacitors PH series PH ‧Super low ESR,Long Life capability ‧Rated voltage :4.0~50V. ‧Endurance:20,000hours at 105℃ ‧Applications:DC/DC Converter,Votage Regulators,Decouping Applications for Computer Motherboards,etc. ‧ROHS compliant ‧Halogen Free compliant SPECIFICATIONS Items Conditions Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor ( tan δ) Characteristics of Impedance at low, high temperature Endurance Damp Heag (Steady State) Surge Voltage Characteristics — — -55 to +105℃ 4.0~50V at 20℃,120HZ ±20%(M) at 105℃ Rated voltage ×1.15V I≦0.2CV or 300(μA) Whichever is greater at 20℃after 2 minutes measured,after 2minutes application of rated working voltage at +20℃. at 20℃,120Hz Please see the attached characteristics list at -55℃,100kHz Z(-55℃)/Z(+20℃) ≦ 1.25 at -25℃,100kHz Z( -25℃)/Z(+20℃) ≦ 1.15 Appearance NO significant damage. The following specifications shall be satisfied Capacitance change ≦±20% of the initial value. when the capacitors are restored to 20℃after DF(tanδ) ≦150% of the initial specified value. the rated voltage is applied for 20,000 hours at ESR ≦150% of the initial specified value. 105℃. Leakage current ≦The initial specified value. The following specifications shall be satisfied Appearance NO significant damage. when the capacitors are restored to 20℃ after Capacitance change ≦±20% of the initial value. subjecting them to subjecting them to store at DF(tanδ) ≦150% of the initial specified value. ≦150% of the initial specified value. 60℃, 90 to 95% RH for 1,000 hours ,without DC ESR Leakage current ≦The initial specified value. applied. The capacitors shall be subjected to 1,000 Appearance NO significant damage. cycles each consisting of charge with the surge Capacitance change ≦±20% of the initial value. voltages specified at 105℃ for 30 seconds DF(tanδ) ≦150% of the initial specified value. through aprotective resistor (R=1kΩ) and ESR ≦150% of the initial specified value. Leakage current ≦The initial specified value. discharge for 5 minutes 30seconds ※ Note:If any doubt arises,measure the leakage current after following voltage treatment. Voltage treatment :DC rated voltage are applied to the capacitors for 120 minutes at 105℃. MARKING AND DIMENSIONS Polarity Marking (Cathode) 330 330 1616 Series Code Rated Capacitance Rated Voltage D±0.5 W±0.2 VA1212 PH2020 C±0.2 P±0.2 L±0.3 (±0.5 forψ8 &ψ10) R H±0.2 0.3max (+) (Unit:mm) Size Code 6.3×6 6.3×7 6.3×9.5 8×7 8*9.5 8×12 10×10.5 10×12.5 68 ψD 6.3 6.3 6.3 8.0 8.0 8.0 10.0 10.0 L 6.0 7.0 9.5 7.0 9.5 12.0 10.5 12.5 W 6.6 6.6 6.6 8.3 8.3 8.3 10.3 10.3 H 6.6 6.6 6.6 8.3 8.3 8.3 10.3 10.3 C 7.3 7.3 7.3 9.3 9.3 9.0 11.0 11.0 R 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.8~1.1 0.8~1.1 0.8~1.1 0.8~1.1 P 2.1 2.1 2.1 3.2 3.2 3.2 4.6 4.6 PDF
Документация на серию PH 

Дата модификации: 11.01.2022

Размер: 1.17 Мб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)