SM4F48A

Yangjie
RoHS SM4F SERIES COMPLIANT Surface Mount Transient Voltage Suppressor Uni-directional Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement ● Available in Unidirectional and Bidirectional ● 400 W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOD123FL
Рассеиваемая мощность
Пиковая рассеиваемая мощность
Рабочее напряжение
Напряжение ограничения (номинальное)
Напряжение ограничения (диапазон)
Максимальное импульсное напряжение
Ток утечки при рабочем напряжении
Максимальный импульсный ток
Тип супрессора по свойствам
Количество линий ограничения
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 3

показать свернуть
Тип Наименование Корпус Упаковка i Pрасс Pрасс(пик) Uраб Uогр(ном) Uогр(диапазон) Uимп(макс) Iраб Iимп(макс) Тип Линий Cперех Примечание Карточка
товара
A- SMAJ48A (YJ)
 
DO214AC в ленте 5000 шт
 
 — Trans Voltage Suppressor Diode, 400W, 48V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC
A- SMBJ48A (YJ)
 

SMBJ48A (ONS-FAIR) 		DO214AA в ленте 3000 шт
 
 — Trans Voltage Suppressor Diode, 48V V(RWM), Unidirectional
A- SMCJ48A (YJ)
 

SMCJ48A (ONS-FAIR) 		DO214AB в ленте 3000 шт
 
 — Trans Voltage Suppressor Diode, 1500W, 48V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB

Файлы 1

показать свернуть
RoHS SM4F SERIES COMPLIANT Surface Mount Transient Voltage Suppressor Uni-directional Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement ● Available in Unidirectional and Bidirectional ● 400 W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High temperature soldering guaranteed: 260 °C/10 s at terminals ● Meets MSL level 1 ● Component in accordance to RoHS Bi-directional Typical Applications Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, telecommunication. Mechanical Date ● Package: SOD-123FL Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Conditions Max Peak power dissipation(1) (2) (Fig.1) PPPM W with a 10/1000us waveform 400 Peak pulse current(1) IPPM A with a 10/1000us waveform (See Next Table) Power dissipation, on infinite heat sink PD W TL=75℃ 0.8 IFSM A 30 TJ,TSTG ℃ -55 to +150 Peak forward surge current, 8.3 ms single half sine-wave unidirectional only (3) Operating junction and storage temperature range RθJL Thermal resistance RθJA RθJC ℃/W Between junction and lead 26 Between junction and Ambient 300 Between junction and Curve 40 Notes: (1). Non repetitive current pulse，per Fig2 and derated above TA=25℃ per Fig3. (2). TL=30℃ unless otherwise noted , VF ≤1.25V@200mA. (3). Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum 1/5 S-S3189 Rev.1.4,12-Oct-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com PDF
Документация на SM4F100A 

Microsoft Word - SM4F SERIES

Дата модификации: 12.10.2021

Размер: 226.3 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    1.5SMC510A (BOURNS)